BMW 1 Series E82 (2008-2013)

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

10X Entries Into Our F80 M3 Sweepstakes

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

GoldenWrench BLACKLINE Performance Oil Filter Housing Cap

T#:7244442

Part#: FXXOFH-R

Ships in 3 Business Days

$ 147.00 USD

Add to Wish List

Qty

$ 147.00 USD

Add to Wish List

OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Performance RED Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles with Adaptive Cruise Control and M Sport Package

T#:599470

Part#: LPM-BMC0136-N

In Stock

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil ...

T#:9901260

Part#: FXXOFH-G

In Stock

$ 147.00 USD

Add to Wish List

Qty

$ 147.00 USD

Add to Wish List

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil is a premium upgrade designed to replace the standard OEM plastic oil filter housing cap. This high-quality billet aluminum cap enhances both the aesthetics and functionality of your BMW's engine.

Durable Construction: Made from 6061 T6 aluminum with a hard anodized finish for superior strength and longevity.
Improved Performance: Features better heat dissipation compared to the factory plastic cap, enhancing engine performance and reliability.
Enhanced Aesthetics: Adds a sleek, high-performance look to your engine bay with 3D precision post-milled detailing and the G Insignia Oil Filter Cage Stabilizer.
Easy Installation: CNC-formed hand grips and a 10mm Allen key maintenance port with a built-in scratch plate simplify the installation and maintenance process.
Direct Replacement: Retains the factory oil filter stalk and is compatible with BMW S55 and most N series engines using BMW part 11427525334.
Increased Longevity: Designed to increase the life span of your oil filter cap and provide a more reliable seal.

Show More Show Less

BLACKLINE Performance Fuel Cap Cover

For Model Years 2010 or Newer

T#:797049

Part#: FXXFCC

Ships in 5 Business Days

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.

Show More Show Less

Blackline Performance Edition Blue Oil Filter Housing Cap

T#:11366500

Part#: FXXOFH-B

In Stock

$ 147.00 USD

Add to Wish List

Qty

$ 147.00 USD

Add to Wish List

OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Motorsport Blue Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.

Show More Show Less

Seat Floor Adapters - E82, E90, E92 - Macht Schnell

T#:22151

Part#: TMS22151

Ships on Sep 25, 2026

$ 235.00 USD

Add to Wish List

Qty

$ 235.00 USD

Add to Wish List

In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

Sold per seat. Can be used on left or ride sides of vehicle.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe

Show More Show Less

Goldenwrench BLACKLINE Performance Edition Hood Latch Handle (LHD) - ...

T#:28171565

Part#: E9XHHL-R

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Your engine bay experience starts here! Introducing our full replacement Billet Hood Latch Handle for BMW E9X Series vehicles! Meticulously designed and created in-house to the highest precision and quality as seen on all of our products replacing the factory unit with a much-improved shotgun-style quick-release functional form factor. We bring to you the newest addition to our BLACKLINE Performance product family for BMW E9X Series vehicles (for left-hand drive vehicles only). Replace the flimsy plastic factory hood latch with our ultra-premium upgraded BLACKLINE Performance Hood Latch Handle. Each unit is CNC formed from T6 Aluminum and anodized with our specialized race-inspired red color. All logos and decorations are finalized through our precision 3D milling process, machined into each handle for the ultimate premium finish. The BLACKLINE Performance Billet Hood Latch Handle will fit most left-hand drive BMW E9X Series model cars plus more (please see application fitment guide below). Each kit comes with a Billet Hood Latch Handle, replacement upgraded fastening hardware, and an Installation Instruction Card. Installation can be completed easily at home in minutes. Give your vehicle the upgrade it deserves. Supported Models: BMW 1 Series E81/E82/E87/E88 BMW 3 Series E90/E92/E93 BMW 6 Series F06/F12/F13

Show More Show Less

BLACKLINE Performance Fuel Cap Cover - Motorsport Blue

Fits 2010+ Model Year BMWs only!

T#:6635763

Part#: FXXFCC-B

In Stock

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.

Show More Show Less

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

T#:2801

Part#: 520-200-240

In Stock

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i

Show More Show Less

Goldenwrench BLACKLINE Performance Edition Hood Latch Handle (RHD) - ...

T#:40512104

Part#: E9XHHR-R

Ships in 5 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

our engine bay experience starts here! Introducing our full replacement Billet Hood Latch Handle for BMW E9X Series vehicles! Meticulously designed and created in-house to the highest precision and quality as seen on all of our products replacing the factory unit with a much-improved shotgun-style quick-release functional form factor. We bring to you the newest addition to our BLACKLINE Performance product family for BMW E9X Series vehicles (for right-hand drive vehicles only). Replace the flimsy plastic factory hood latch with our ultra-premium upgraded BLACKLINE Performance Hood Latch Handle. Each unit is CNC formed from T6 Aluminum and anodized with our specialized race-inspired red color. All logos and decorations are finalized through our precision 3D milling process, machined into each handle for the ultimate premium finish. The BLACKLINE Performance Billet Hood Latch Handle will fit most left-hand drive BMW E9X Series model cars plus more (please see application fitment guide below). Each kit comes with a Billet Hood Latch Handle, replacement upgraded fastening hardware, and an Installation Instruction Card. Installation can be completed easily at home in minutes. Give your vehicle the upgrade it deserves.

Show More Show Less

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

T#:4648679

Part#: 69.10.100

Ships in 10 Business Days

$ 289.00 USD

Add to Wish List

Qty

$ 289.00 USD

Add to Wish List

Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.

Show More Show Less

E82 135i N55 Build Your Own Maintenance Service Package

10X Entries Into Our F80 M3 Sweepstakes

T#:338794

Part#: TMS213604

In Stock

Starting at $ 125.98 USD

Add to Wish List

Starting at $ 125.98 USD

Add to Wish List

Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service

(click to expand)

engine oil change with filter, using OE BMW 5W30 or Motul
replace drain bolt crush washer
reset oil service/maintenance indicator
inspect and top off any other fluids

Annual Service

(click to expand)

air filter cleaning or replacement
MAF/airflow sensor cleaning
A/C microfilter/cabin filter replacement
brake fluid flush/bleeding
top off power steering fluid (make sure you use the correct Pentosin fluid!)
wiper blade replacement
lubricate door hinges and treat rubber door seals
inspect spare tire or tire repair kit, and tire-changing tools
inspect drive belt for cracking or stretching
inspect intake boots and vacuum lines for cracks
inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
inspect bushing and ball joints for excess play/movement
ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)

40,000 Mile Major Service

(click to expand)

spark plug replacement
ignition coil and coil boot inspection and replacement
inspect spark plug cavity in valve cover for leaking valve cover gasket
engine oil change with filter, using OE BMW 5W30 or Motul
reset oil service/maintenance indicator
air filter replacement or cleaning for aFe/K&N type
fill and bleed cooling system
manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
differential fluid change, using Red Line 75/90 or Motul Gear300
brake fluid flush/bleeding
serpentine belt replacement
inspect belt roller pulleys (drag and rotation) and belt tensioners
complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
complete brake system test and inspection
engine and transmission leak detection and diagnosis
shifter linkage, driveshaft guibo, CV, and center support bearing inspection
exhast system inspection, including hanger replacement

80,000 Mile Major Service

(click to expand)

spark plug replacement
ignition coil and coil boot inspection and replacement
inspect spark plug cavity in valve cover for leaking valve cover gasket
engine oil change with filter, using OE BMW 5W30 or Motul
reset oil service/maintenance indicator
air filter replacement or cleaning for aFe/K&N type
fill and bleed cooling system
manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
differential fluid change, using Red Line 75/90 or Motul Gear300
brake fluid flush/bleeding
fuel filter, pressure regulator replacement
serpentine belt replacement
replace belt roller pulleys and belt tensioners
complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
complete brake system test and inspection
engine and transmission leak detection and diagnosis
shifter linkage, driveshaft guibo, CV, and center support bearing inspection
exhast system inspection, including hanger replacement
water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.

You may also want to pick up these other helpful items:

E90 Bentley Service Manual (not specific to the 1-series but still very helpful)

We offer many DIY-related tools, specifically for the 135i owner -
drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!

SprintBooster throttle enhancement
This package fits the following BMWs:
2011-2012 E82 BMW 135i
2011-2012 E88 BMW 135i Convertible

Put a check in the boxes next to the items you wish to order.

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 4 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Active Autowerke N54 Blow Off Valve Kit - E82 135i, 1M, E9X 335i ...

T#:4416

Part#: AABOVKIT-N54

In Stock

$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

When adding boost to the N54 engine, it's important to consider effects throughout the rest of the system. Additional boost can overwhelm the stock BMW diverter valve system and lead to boost leakage, or boost spikes, and lost horsepower. With the factory components in place it's hard to maintain consistently high boost levels. Instead of the weak plastic components of the stock system, Active Autowerke uses a CNC-machined and mandrel-bent aluminum tube with a Venturi blow-off valve in place of the original diverter valves. The blow-off valve dumps overboost into the atmosphere for that distinctive turbo 'whoosh' sound. The single AA BOV is over-sized for the N54 application - taking the place of the two small diverter valves, and verified to handle over 600hp. With the BOV acting properly your turbos and other components are protected from compressor surge caused by excess pressure build-up.

We like the Active BOV better than other forms of diverter and BOV kits because it's tried and true - AA was the original turbo BMW tuners and their experience is second to none. That's why they took the time to engineer their kit to fit perfectly, using the OE-type connector to the throttle body, and high-strength silicone to the lower intercooler tube. Each connection is a tight, leak-free seal. The kit comes complete with the discharge tube, vacuum plugs for the stock hoses, and instructions. The tube is powdercoated in black and with a wrinkle finish for an OE appearance.

This item fits the following BMWs with N54 engine:
2008-2010 E82 BMW 135i 1M
2007-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2007-2010 E93 BMW 335i

Show More Show Less

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

T#:388675

Part#: 340366TCKD4AMN6T

Ships in 4 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

Green Filter Cleaning Kit

T#:397308

Part#: 15-011

Ships in 4 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Includes Recharge Oil (8 oz.) and Cleaner Spray (12 oz.). The recharge oil traps the smallest dirt particles, ensuring your engine is breathing clean air. The oil creates a positive magnetic charge with the filter's stainless steel mesh. This positive charge attracts negatively charged dust particles entering the filter, clearing them off the cotton and allowing for maximum airflow. The oil also contains a swelling additive for the cotton filtration media - this allows filtration media to collect small dirt particles that could harm your engine.

Show More Show Less

N55 Charge Pipe Upgrade

T#:341887

Part#: 135N55CP-KIT

Ships in 4 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

T#:340366

Part#: N55CP-KIT

Ships in 3 Business Days

Starting at $ 189.99 USD

Add to Wish List

Starting at $ 189.99 USD

Add to Wish List

One major weak point in the N55 turbo plumbing is the stock upper chargepipe from the intercooler outlet to the intake manifold. The original N55 charge pipe is made from a weak plastic and can fail with even stock boost levels. The most common problem is a crack that develops along a seam where the pipe connects to the throttle body. Any crack here is bad as it creates a massive vacuum leak and the engine electronics will put the car into limp mode. If you don't want to be sidelined there is a very simple fix - the Active Autowerke N55 charge pipe.

This aluminum pipe is much stronger and more durable and nearly indestructable for the N55 application. It uses a CNC-machined factory-style connection and o-ring to the throttle body to ensure a tight and leak-free seal. The piping is a consistent 3" diameter for better flow and an improved throttle response. AA has included a raised boss with two ports should you choose to add a water/meth injection system later. The factory MAP sensor installs in the same location and the pipe is powdercoated black for a factory-type appearance.

With a stronger pipe you don't have to worry about the infamous chargepipe crack and lost boost levels and horsepower. All of the boost in the world is useless if it's leaking so using beefed up components in place of the weak factory pieces is the smart way to consistently high power output.

This item fits the following BMWs with the N55 engine:
2011-2012 E82 BMW 135i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible

Show More Show Less

Macht Schnell Ashtray Gauge Panel - E82

T#:4648663

Part#: 50.10.020

Ships in 6 Business Days

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Macht Schnell's gauge panel is designed to be a direct replacement for the stock ashtray in the E82. This panel mounts using factory ashtray mounting holes and no unnecessary modification is required. The textured plastic is composed of ABS plastic that resists warping or bending in high heat and feels similar in touch to OEM. *Please contact us for custom painting options. Designed for 52mm gauges.

Show More Show Less

Seatbelt 4-point Race Harness Receptacles - Macht Schnell

T#:338505

Part#: 79.12.15X

Ships on Sep 29, 2026

Starting at $ 125.00 USD

Add to Wish List

Starting at $ 125.00 USD

Add to Wish List

If you're going to use a 4 point racing harness with your racing or sport seat and don't want to drill through your floor and carpet, these harness adapter plates are perfect*. These sandwich in between your slider and seat bracket for a strong and secure mounting point. They are made from high-strength steel and powedercoated in stealthy black. Choose from a bolt-in or clip-in style harness end. These will only work with the Macht Schnell floor mounts.

* - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

BMW M Car E9X Series BLACKLINE Performance Hood Latch Handle (LHD) ...

T#:53891650

Part#: E9XHHL

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Secure the engine bay. Upgrade your service efficiency. Give your machine the grid-ready hardware it deserves.

Active Autowerke Rotrex Traction Fluid - 1 Liter

T#:57616348

Part#: RTF-1L

Ships in 4 Business Days

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Front 9668/372...

T#:57086655

Part#: 13.01.10038

Ships on Sep 18, 2026

$ 6,687.99

This product was last offered at the strikethrough price on
08-26-2026

$ 6,199.00 USD

Add to Wish List

Qty

$ 6,199.00 USD

Add to Wish List

Electroless Nickel Plated Front Competition Brake Kit

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Rear 9449/340m...

T#:57086656

Part#: 13.01.10053

Ships on Sep 18, 2026

$ 5,447.99

This product was last offered at the strikethrough price on
08-26-2026

$ 5,049.00 USD

Add to Wish List

Qty

$ 5,049.00 USD

Add to Wish List

Electroless Nickel Plated Rear Competition Brake Kit

SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...

10X Entries Into Our F80 M3 Sweepstakes

T#:56001958

Part#: SPLRUAE9XKT2

Ships in 6 Business Days

$ 1,258.00 USD

Add to Wish List

Qty

$ 1,258.00 USD

Add to Wish List

This premium SPL chassis upgrade kit is engineered to anchor your rear axle. Featuring SPL’s Titanium Series Rear Toe Arms with an eccentric lockout kit, alongside a complete 4 piece set of Rear Upper Wishbones and Guide Links

Show More Show Less

Seatbelt 6-point Race Harness Receptacles - Macht Schnell

T#:338507

Part#: 79.20.150K

Ships on Sep 29, 2026

Starting at $ 174.00 USD

Add to Wish List

Starting at $ 174.00 USD

Add to Wish List

Many racing series and event organizers are requiring 5 or 6-point harnesses in their events now. Attaching the anchor points to the seat base is a desired alternative to drilling holes in your floor and carpet*. This set includes the 6-point anchor to attach to the Macht Schnell floor mount as well as side attachments for either a bolt-in or snap-in harness.

* - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

GoldenWrench BLACKLINE Performance Oil Filter Housing Cap

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil ...

BLACKLINE Performance Fuel Cap Cover

Blackline Performance Edition Blue Oil Filter Housing Cap

Seat Floor Adapters - E82, E90, E92 - Macht Schnell

Goldenwrench BLACKLINE Performance Edition Hood Latch Handle (LHD) - ...

BLACKLINE Performance Fuel Cap Cover - Motorsport Blue

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

Goldenwrench BLACKLINE Performance Edition Hood Latch Handle (RHD) - ...

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

E82 135i N55 Build Your Own Maintenance Service Package

Active Autowerke Signature Trunk Emblem

Active Autowerke N54 Blow Off Valve Kit - E82 135i, 1M, E9X 335i ...

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

Green Filter Cleaning Kit

N55 Charge Pipe Upgrade

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

Macht Schnell Ashtray Gauge Panel - E82

Seatbelt 4-point Race Harness Receptacles - Macht Schnell

BMW M Car E9X Series BLACKLINE Performance Hood Latch Handle (LHD) ...

Active Autowerke Rotrex Traction Fluid - 1 Liter

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Front 9668/372...

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Rear 9449/340m...

SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...

Seatbelt 6-point Race Harness Receptacles - Macht Schnell

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results