BMW Maintenance & Tune-Up Parts for BMW 1 Series E82 (2008-2013)

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Stock air filters are not designed for getting the highest flow rate possible. This causes air flow restrictions that prevent the highest possible power from the stock design. With COBB's BMW N54 High Flow Air Filter, designed to directly replace the stock air filter ( BMW Part # 13717556961), you can expect the highest flow rates from a stock style design while still maintaining maximum filtration. 

BMW N54 High Flow Filter

• Washable/Reusable Cotton Woven Media
• Precision Molded for Direct Drop In To The Factory Air Box
• Increased Air Flow While Maintaining Filtering Efficiency
• Pre-Oiled
• Compatible with COBB Accessport OTS Maps

Looking to improve your intake without having to tear apart your engine bay? Then this drop-in performance air filter may be the perfect option for you! Allowing for much higher and easier air flow than the stock BMW filter, this filter allows your engine to breathe much easier at any RPM, freeing up horsepower and torque that normally would have been locked away.

Thanks to the direct replacement style of this filter, no modifications need to be made to the intake components. Just pull out your old filter, place this filter in the stock location, and enjoy!

All sets of 12 now 10% off regular price!

Add to your limited slip differential to improve the fluid and wear prevention!

Features:

• Fully-synthetic formulas created from polyol ester base stocks, offer excellent lubrication under extreme conditions
• High viscosity-index (VI) to provide relatively constant viscosity and film thickness with varying temperature change
• Ester base stocks and friction modifiers provide additional slipperiness to lower operating temperatures by reducing the sliding friction in hypoid gears
• Superior shear stability and reduced oxidation compared to other synthetics and conventional gear oils
• Exceed API GL-5 specifications
• Engineered to provide the highest degree of protection and improvement of differential efficiency for better mileage, longer drain intervals, and less wear
• 4 oz. bottle

All sets of 12 now 10% off regular price

This is Red Line's latest synthetic transmission fluid that is compatible with BMW's MTF-LT3 transmission fluid. This is the transmission fluid used in both manual and automatic transmissions since the mid-2000's. To confirm, check the decal located on the side of your transmission. Price is per quart.

Synthetic D6 ATF is a lower viscosity version of the D4ATF and is designed for better fuel efficiency in CAFE testing. Dexron VI requires a different approach to a conventional ATF formulation. Rather than beginning with a 7.5 cSt fluid and allowing a viscosity loss in use to drop to 5.5 cSt, the Dexron VI fluid requires a starting viscosity of less than 6.4 and a final drop to no less than 5.5 cSt. Red Line D6 will drop to no less than 6.1 cSt. Since the final viscosity after use of these fluids are similar, Dexron VI fluids can be used where Dexron III fluidswere previously recommended (with the exception of some manual transmission applications, our customers report).

D6 ATF also provides significantly improved gear protection and will provide a GL-4 level of gear protection. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Keep your BMW's cooling system in top condition with DEI's Radiator Relief™ Cooling System Flush. This concentrated cleansing agent effectively removes rust and mineral deposits from the radiator core and hose lines, restoring efficiency. Additionally, it dissolves oily residue build-up left by old antifreeze and coolant mixtures, ensuring optimal performance. Simple to use and 100% biodegradable, this flush is recommended for use with distilled water to maintain optimum efficiency. Note that it is intended for a complete coolant flush and should not be added to existing coolant.

Benefits:

• Removes rust deposits from radiator core and hose lines
• Dissolves oily residue for improved performance
• Restores cooling system efficiency
• Simple to use
• 100% biodegradable

This 0W-40 engine oil is ideal for BMW vehicles, offering swift flow throughout the engine for quick starts and enhanced wear protection. Its ester base lubricates engine components with precision, reducing wear and tear, while its detergents and dispersants effectively cleanse deposits, holding them until the next oil change. Specifically formulated for modern road cars and light trucks, it meets the specifications of most late-model BMW models and is also suitable for VW/Audi 500.00,502.00, 503.01, 505.00. Recommended for API SN/SM/SL/CF and ACEA A3/B3/B4 standards, this oil ensures top-notch performance and longevity for your BMW's engine.

• Swift flow for fast starts and wear protection
• Ester base reduces engine wear
• Cleanses deposits effectively
• Suitable for modern road cars and light trucks
• Meets specifications for late-model BMW models
• Compatible with VW/Audi 500.00,502.00, 503.01, 505.00
• Recommended for API SN/SM/SL/CF and ACEA A3/B3/B4 standards