BMW Suspension Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Rogue Engineering - Corporate Logo
T#:553834
Part#: RE.E9X.TA
Back Ordered
$ 339.00 USD
Free Shipping
$ 339.00 USD
Free Shipping

Updated design!  Now shipping!

When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

Features:

100% machined and anodized, 6061-T6 lightweight aluminum arms (and collars).

Stainless hardware and spacers are perfect for the tough Northeast climate!

New!  Easy adjustment with 22mm open ended wrench and 5mm allen key!  It only requires 15 ft. lbs. on the clamp to secure the clamp!

New!  Included lock-out kit, replaces factory eccentric hardware.

Updated 3-piece rod ends features 4130 chromoly steel bodies, heat-treated, alloy steel races, and Teflon liners

Extremely easy installation and adjustment (your alignment shop will LOVE you!)

Show More Show Less
Koni - Corporate Logo
T#:380890
Part#: 87411484RSPORTKT
In Stock
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping

KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast. 

  • Big handling improvements
  • Reasonable ride quality
  • Re-buildable for custom vehicle setups
  • Best KONl shock for all lowering springs
  • Lifetime Warranty

Activate your Koni Rebate!

​This item fits the following BMWs:

E82 E88 128i 135i

E9x 325i 328i 330i 335i

Show More Show Less

Koni - Corporate Logo
T#:369794
Part#: E9XKONISPT
In Stock
$ 1,060.99 USD
Free Shipping
$ 1,060.99 USD
Free Shipping

KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast.
 

  • Big handling improvements
  • Reasonable ride quality
  • Re-buildable for custom vehicle setups
  • Best KONl shock for all lowering springs
  • Lifetime Warranty​

 

Activate your Koni Rebate!

 

This item fits the following BMWs:
2008-2013 E82 BMW 128i 135i 135is
2006-2011 E90 BMW 325i 328i 330i 335d 335i  - Sedan
2007-2013 E92 BMW 328i 335i 335is  - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible

Show More Show Less

Bilstein - Corporate Logo
T#:384725
Part#: 19-152769KT
Ships in 6 Business Days
$ 340.00 USD
Free Shipping
$ 340.00 USD
Free Shipping

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!

This item fits the following BMWs:
2008-2013 E82 BMW 128i with standard suspension

Show More Show Less
ECS Billet Rear Sway Bar Brackets With Polyurethane Bushings - Pair -...
10X Entries Into Our F80 M3 Sweepstakes
For use with Aftermarket 23mm rear sway bar
ECS - Corporate Logo
T#:3443018
Part#: 016921LA09
Ships in 8 Business Days
Sale - Save 10% $ 113.99

This product was last offered at the strikethrough price on
06-14-2026

$ 102.59 USD
Free Shipping
Sale - Save 10%
$ 113.99

This product was last offered at the strikethrough price on
06-14-2026

$ 102.59 USD
Free Shipping
The ECS Tuning Billet Rear Sway Bar Mounting Kit was designed, engineered, tested and quality inspected thanks by their Research and Development team in Wadsworth, Ohio facility. ECS ensures that the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. This kit provides your vehicle with a more rigid mounting solution from the sway bar to chassis than the OEM steel brackets. With an improved sway bar mounting bracket and the included polyurethane sway bar bushings, you can expect to achieve an increase in rear sway bar effectiveness and less body roll as a result.
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:2408498
Part#: IRPRSB-9XMB2
Special Order: No Guaranteed ETA
$ 176.99 USD
Free Shipping
$ 176.99 USD
Free Shipping
Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:2408491
Part#: IRPRSB-90PU
In Stock
$ 175.00 USD
Free Shipping on orders $49 and up
Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.
Show More Show Less

Turner Motorsport - Corporate Logo
T#:340476
Part#: TSU9980548
Ships on Feb 10, 2027
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less

E82/E9x 1M/M3 B4 Front Strut Assembly - Left
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:344702
Part#: 22-214300
Special Order: No Guaranteed ETA
$ 169.00 USD
Free Shipping
$ 169.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less
Turner Motorsport - Corporate Logo
T#:340477
Part#: TSU998062A
Ships on Feb 10, 2027
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
Race Polyurethane Rear Upper Control Arm Bushings, Outer Position Set...
Used in the outer position of the rear upper control arm and rear guide rod
Powerflex Black Series - Corporate Logo
T#:376499
Part#: PFR5-412BX2
Ships in 1 Business Day
$ 122.99 USD
Free Shipping
$ 122.99 USD
Free Shipping

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi 
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i

Show More Show Less


Rear Anti-Roll Bar - 15.8mm
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389102
Part#: D120-0507
Ships in 9 Business Days
Sale - Save 10% $ 399.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 359.96 USD
Free Shipping
Sale - Save 10%
$ 399.99

This product was last offered at the strikethrough price on
09-28-2026

$ 359.96 USD
Free Shipping
Fall Line - Corporate Logo
T#:28071501
Part#: FLM-E9X-1FRACTOE
Back Ordered
$ 650.00 USD
Free Shipping
$ 650.00 USD
Free Shipping
A byproduct of multi-link suspension arrangements is a dynamic change in the car’s alignment settings- when making an adjustment to one attribute like camber, track width and toe will follow. This is especially true for the E9x cars, as the original BMW camber eccentric bolt has an impact on toe as well. Alignments are made faster and simpler when using a set of aftermarket lower arms, enabling the alignment tech to easily reset toe after adjusting camber. The race toe link kit by Fall Line Motorsports is designed to facilitate rapid adjustments of toe during an alignment, and combined with the tension strut will also enable adjustment of overall track. Not only does this allow for fine tuning of wheel fitment, these arms will allow an alignment shop to make quick work of car setup, even simplifying the camber adjustment process as a result. The race toe links utilize a unique clamp-style fastener system as seen in BMW’s own tie rods and Porsche Motorsport components, tightening the adjustment arm in place with no stretch of the hardware or change of alignment. Less expensive jam-nut designs limit precision and nearly guarantee an alignment change when the jam-nut is tightened. Laser cut lockout washers correctly eliminate the original BMW adjustment, eliminating any unwanted movement in the system.
Show More Show Less
Fall Line - Corporate Logo
T#:5580971
Part#: F8X-1BLCASB
Back Ordered
$ 419.99 USD
Free Shipping
$ 419.99 USD
Free Shipping
Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm subframe cup bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with the competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less

E82 128/135, E9X 325i/328i/330i/335i RWD Dinan Sway Bar Set
128i must have factory rear sway bar installed to re-use brackets and links
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389104
Part#: E9XR30D120
Ships in 9 Business Days
Sale - Save 10% $ 1,159.99

This product was last offered at the strikethrough price on
09-28-2026

$ 1,043.99 USD
Free Shipping
Sale - Save 10%
$ 1,159.99

This product was last offered at the strikethrough price on
09-28-2026

$ 1,043.99 USD
Free Shipping

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. The rear bar is non-adjustable. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

Dinan E9X Sway Bar Specs:
F: 28mm, hollow, 2-position adjustable, adjustable links, urethane bushings, and brackets included
R: 15.8mm, solid, non-adjustable, urethane bushings included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

Note: main image may not match actual sway bars.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2011 E91 BMW 325i 328i - Touring Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible

Show More Show Less

Turner Motorsport - Corporate Logo
T#:1241331
Part#: E9XPERFSUSRKT
Ships on Nov 6, 2026
Sale - Save 3% $ 1,968.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,907.94 USD
Free Shipping
Sale - Save 3%
$ 1,968.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,907.94 USD
Free Shipping
Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Rear: Adjustable Toe Arms - Increased range of adjustment and low suspension deflection Upper Control Arms - Upgraded durability over weak OEM linkages Sway Bar End Links - Adjustable height to eliminate preload
Show More Show Less
Rod End Boot (14-18mm) - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:599632
Part#: RERS3
In Stock
Sale - Save 25% $ 19.99

This product was last offered at the strikethrough price on
07-14-2026

$ 15.00 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 19.99

This product was last offered at the strikethrough price on
07-14-2026

$ 15.00 USD
Free Shipping on orders $49 and up
Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.
Show More Show Less

Whiteline - Corporate Logo
T#:26638279
Part#: KTA255
In Stock
$ 698.99

This product was last offered at the strikethrough price on
07-23-2026

$ 648.99 USD
Free Shipping on orders $49 and up
$ 648.99 USD
Free Shipping on orders $49 and up

BMW E46 E9X Control Arm - Lower Arm offers a convenient and high-performance solution for those replacing suspension components. Instead of dealing with the time-consuming and potentially challenging task of replacing bushings and ball joints separately, this control arm provides an all-in-one replacement. It comes equipped with market-leading Whiteline synthetic elastomer bushings and high-quality ball joints (where applicable), ensuring durability and superior handling.

  • Includes market-leading Whiteline synthetic elastomer bushings for enhanced performance
  • Comes with high-quality ball joints (where applicable) for improved reliability
  • Provides a complete replacement solution, eliminating the need for separate bushing and ball joint replacement
  • Designed to simplify installation and reduce the risk of damage to suspension arms
  • Ideal for BMW E46 and E9X models (Note: Does not fit XDrive models)
Show More Show Less
BMW E8X E9X Replacement Bushings - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:28570865
Part#: 6145300102ECS
In Stock
Sale - Save 74% $ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.67 USD
Free Shipping on orders $49 and up
Sale - Save 74%
$ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.67 USD
Free Shipping on orders $49 and up

Upgrade your BMW's suspension with BMW E8X E9X Replacement Bushings.

Engineered for durability and performance, these bushings provide improved handling and responsiveness. Specifically designed for BMW E8X and E9X models, they ensure a precise fit and reliable performance. Reduce vibrations and enhance driving comfort with these high-quality replacement bushings.

  • Improved handling and responsiveness
  • Specifically designed for BMW E8X and E9X models
  • Precise fit for reliable performance
  • Reduces vibrations for enhanced driving comfort
  • High-quality construction for durability
Show More Show Less

Powerflex - Corporate Logo
T#:362715
Part#: PCG1
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up
The Powerflex silicone grease is the only lubricant we suggest for long, squeak free operation. The lubricant contains silicone that resists heat and water and keeps a more constant viscosity to allow it to stay in the bushing as temperatures increase. The lubricant also does not lose it's lubrication properties over time like an anti-seize type lubricant. Each pack will lube 2 large bushings or 4 small.
Show More Show Less

Powerflex - Corporate Logo
T#:54281628
Part#: PFR5-4609-12BLK
Back Ordered
New Item
$ 79.99 USD
$ 79.99 USD
In high-performance driving and competitive motorsport, precision is everything. Stock rubber bushings flex, deflect, and degrade under load, leading to inconsistent handling, delayed chassis response, and unpredictable dynamic toe and camber changes.
Show More Show Less
Powerflex - Corporate Logo
T#:54281637
Part#: PFR5-413BLK
Ships in 1 Business Day
New Item
$ 132.99 USD
$ 132.99 USD
This component provides a major performance upgrade by delivering the rigid geometry control of a metallic spherical bearing, but with significantly higher longevity and resistance to track debris binding.
Show More Show Less
Bilstein - Corporate Logo
T#:378741
Part#: 35-115908KT
Ships in 3 Business Days
$ 601.99

This product was last offered at the strikethrough price on
07-29-2026

$ 558.00 USD
Free Shipping
$ 558.00 USD
Free Shipping

Bistein B6 Performance Front Strut Assembly - Pair -- E82 128i is engineered for drivers who demand enhanced handling and stability without compromising ride comfort. This strut assembly is designed specifically for use with stock springs, providing a perfect balance of performance and comfort. Ideal for BMW E82 128i and similar models, the Bilstein B6 shocks deliver precision handling on the road while ensuring long-lasting durability.

Benefits:

  • Improved handling and stability: Enhances cornering and control while maintaining comfort.
  • Direct fit for stock springs: Designed for seamless installation with your BMW's factory suspension setup.
  • Durable and reliable: Built to withstand demanding driving conditions.
  • Enhanced performance: Ideal for spirited driving, offering improved road feedback without sacrificing ride quality.
  • Includes hardware: Comes with top nuts and rear lower shock washers for easy installation.
Show More Show Less


Air Lift - Corporate Logo
T#:377944
Part#: 16444
Ships in 4 Business Days
$ 453.99 USD
Free Shipping
$ 453.99 USD
Free Shipping

Ensure optimal performance for your BMW's air suspension system with the reliable 444C Air Compressor. This compressor fills your supply tank efficiently, providing ample air to inflate your air bags and lift your suspension. With a 100% duty cycle and a rating of 200psi, this compressor offers uninterrupted operation and quick air inflation. Considered one of the best options available, it draws around 20 amps and weighs only 9.75 pounds each.

  • 100% duty cycle for uninterrupted operation
  • Rated at 200psi for quick air tank filling
  • Draws around 20 amps for efficient performance
  • Lightweight design at only 9.75 pounds each
Show More Show Less
Yellow Adjustable Front Strut - Right
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389439
Part#: D140-0944
Ships in 5 Business Days
Sale - Save 10% $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 421.15 USD
Free Shipping
Sale - Save 10%
$ 467.99

This product was last offered at the strikethrough price on
09-28-2026

$ 421.15 USD
Free Shipping
Air Lift - Corporate Logo
T#:384815
Part#: 23444B
Ships in 4 Business Days
$ 521.99 USD
Free Shipping
$ 521.99 USD
Free Shipping

Upgrade your BMW's air suspension system with the 444C Dual Pack Compressors from Turner Motorsport. These compressors feature a newly-developed intercooler head and stainless steel braided leader hose for enhanced durability and performance. Ensure reliable air supply for your BMW's suspension system with this comprehensive kit.

  • Newly-developed intercooler head for improved performance
  • Stainless steel braided leader hose with inline check valve for compressor protection
  • Complete kit includes all necessary components for installation
  • Enhances durability and reliability of your BMW's air suspension system

Kit Features:

  • (2) 444C Black Compressors
  • Patents Pending Intercooler Head
  • (2) Air Filter Assemblies
  • (2) Remote Mount Brackets
  • (2) Sets of Remote Mount Fittings
  • (2) Sets of Spare Air Filter Elements
  • (8) Sets of Nuts, Bolts, Washers and Lock Washers
  • (2) Stainless Steel Braided Leader Hoses with Inline Check Valve
  • (6) Airline Clips

*Does not include relays, pressure switch or air line for remote air filter relocation

Show More Show Less

Air Lift - Corporate Logo
T#:384246
Part#: 27703
In Stock
$ 173.99 USD
Free Shipping
$ 173.99 USD
Free Shipping
Integrate an Additional Compressor with Air Lift Performance 3H/3P Control System for your BMW. This specialized harness is designed for BMW enthusiasts who want to enhance their Air Lift Performance 3H/3P Control System by seamlessly integrating a second compressor. Elevate your BMW's air suspension capabilities to new heights with this innovative kit. Key Features: Pre-wired 50/30 Amp Relay: The harness includes a pre-wired 50/30 amp relay with a weather-tight connector, ensuring optimal electrical performance and protection. 30 Amp Fuse with Holder: A 30 amp fuse with a holder is provided to safeguard the electrical system and components, preventing any potential overloads. Solderless Wire Connectors: The kit includes solderless wire connectors, simplifying the installation process and ensuring secure electrical connections without the need for intricate soldering. Upgrade your BMW's air suspension system with this easy-to-install harness, allowing for the integration of a second compressor into your Air Lift Performance 3H/3P Control System. Experience improved performance and control with this essential addition.
Show More Show Less

Powerflex - Corporate Logo
T#:376470
Part#: PFR5-4609-11X2
Ships in 1 Business Day
$ 70.99 USD
Free Shipping
$ 70.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less
Air Lift - Corporate Logo
T#:384239
Part#: 27690
In Stock at Vendor
$ 2,509.99 USD
Free Shipping
$ 2,509.99 USD
Free Shipping
Air Lift is proud to introduce their all new height + pressure air suspension control system! Air Lift Performance 3H is the result of three years of development and testing. It is the most advanced product they have yet to create. Air Lift Performance 3H combines pressure-based control with ride-height sensing technology. While both types of air management have been utilized before, this is the first product to harness the benefits of both systems – instantly improving suspension control, performance, and vehicle ride flexibility. Key Specs: Controller - Features a brilliant TFT color display with adjustable backlight and illuminated preset buttons. Shown in the full color display is your tank pressure, 4-corner active height and pressure readings, as well as a full menu selection. This controller is lined with a black anodized CNC machined case that is also threaded in all four corners for custom mounting. To further allow custom mounting options the keypad can also be rotated and configured horizontally! Lastly this innovative controller is powered via a Micro-USB port and cable. Mobile App - Each 3H and 3P management system works with the Free mobile app with no additional hardware required to buy and install! Not only can you adjust your ride height and system settings from your smart phone via Bluetooth, you can now update the system software directly to the manifold and controller from the mobile app as well! Manifold - The heart of every 3H and 3P system is most advanced state of the art manifold Air Lift Performance has ever created. Constructed using the best components and materials Air Lift could find, this system has also undergone rigorous torture testing to ensure this system will last for countless miles to come! Featuring a 32-bit processor that provides sophisticated height and pressure algorithms to give you the most precise control over all four corners of your vehicle. This system has also been designed to be installed as simply as possible with minimal, streamlined harness connections between the controller, manifold, and power supply. This manifold has been fully integrated from the get go with built in Bluetooth eliminating the need for additional components and wiring to connect your mobile device to the system. Air Lift Performance has also included a built in accelerometer that can detect the movement of the vehicle and make extremely accurate adjustments to ride height at anytime using the height sensors or keeping your bag pressure in line with your pre-set values. Height Sensors - Air Lift Performance has created an improved and advanced height sensor arm utilizing a angular design which will increase the sensors life span compared to straight-arm designs. The wiring harness's for these sensors also have very small connectors meaning that you do not have to drill large holes, or any holes at all in your vehicle to route them to the manifold harness! Also included are fully adjustable sensor linkages that can be measured and cut to exact lengths to properly operate in the suggested range of motion in which a template is supplied in the installation manual. This kit is also sold separately for those with the 3P Digital Air Management System that may want to upgrade to full height and pressure adjustability in the future. Show Mode - Allows you to still manage your vehicles height while the vehicle is off either through the controller or over Bluetooth with your smart phone! Kit Features: Height + Pressure 1/4" Manifold Air Lift Black Anodized Aluminum Display Fully Integrated Wiring Harness That Also Incorporates Compressor Power Necessary Fittings, Hardware, and Connectors For a Complete Install Air Lift Automatically Draining Water Trap 60ft of 1/4" Air Line 3H Includes Rotational Height Sensors, Wiring, and Linkages FREE Smart Phone App Which Works on Both iPhone and Android Integrated Into the Manifold, No Extra Module to Buy! Both Iphone and Android app are currently available * You may also integrate a second compressor to this management with ES2966731
Show More Show Less

Air Lift - Corporate Logo
T#:384251
Part#: 27685
In Stock at Vendor
$ 2,007.99 USD
Free Shipping
$ 2,007.99 USD
Free Shipping
Air Lift is proud to present the innovative Air Lift Performance 3P system, designed for BMW enthusiasts seeking the pinnacle of air suspension control. With three years of dedicated development and rigorous testing, the 3P system stands as the most advanced offering from Air Lift to date. 3P is a groundbreaking system that merges pressure-based control with the capability to add ride-height sensing through height sensors. This cutting-edge combination delivers instant improvements in suspension control, performance, and ride flexibility, ensuring a smoother and more responsive driving experience. Key Specifications: Controller: The 3P system boasts a state-of-the-art controller with a brilliant TFT color display featuring adjustable backlight and illuminated preset buttons. The display provides real-time information such as tank pressure, 4-corner active height and pressure readings, and a full menu selection. The black anodized CNC machined case is threaded in all four corners for customizable mounting. The keypad can be rotated and configured horizontally for versatile installation options. Additionally, the controller is powered via a Micro-USB port and cable. Mobile App: The 3P system seamlessly integrates with a free mobile app that allows you to adjust your ride height and system settings directly from your smartphone using Bluetooth connectivity. Furthermore, you can conveniently update the system software on the manifold and controller via the mobile app. Manifold: At the core of the 3P system lies the most advanced manifold ever created by Air Lift Performance. Crafted from top-quality components and materials, this manifold has undergone extensive torture testing to ensure long-lasting performance. Equipped with a 32-bit processor, it offers sophisticated height and pressure algorithms for precise control over each corner of your BMW. The streamlined harness connections between the controller, manifold, and power supply make installation straightforward. This manifold is fully integrated with built-in Bluetooth, eliminating the need for extra components and wiring to connect your mobile device to the system. It also includes a built-in accelerometer to make real-time adjustments to ride height using height sensors or maintaining bag pressure according to preset values. Height Sensors: Air Lift Performance has introduced an enhanced height sensor arm with an angular design, extending the sensor's lifespan compared to straight-arm designs. The wiring harnesses for these sensors feature small connectors that eliminate the need for drilling large holes in your BMW for routing. The kit also includes fully adjustable sensor linkages that can be measured and cut to precise lengths, ensuring optimal operation within the recommended range of motion. Show Mode: Enjoy the ability to manage your BMW's ride height when the vehicle is off, using the controller or your smartphone via Bluetooth. Kit Features: Pressure-Based 3/8" Manifold Air Lift Black Anodized Aluminum Display Fully Integrated Wiring Harness, Including Compressor Power Complete Set of Fittings, Hardware, and Connectors for a Hassle-Free Installation Air Lift Automatically Draining Water Trap 60ft of 3/8" Air Line Optional Pressure to Height Upgrade Kit Available for Full 3H Capabilities FREE Smartphone App Compatible with iPhone and Android, Integrated into the Manifold (No Extra Module Required) Enhance your BMW's performance and driving experience with the Air Lift Performance 3P system. Upgrade your air suspension control to achieve new heights of precision and control. Discover the future of air suspension management with the 3P system today! Please note that 27705 can be purchased separately for 3P Digital Air Management System owners looking to upgrade to full height and pressure adjustability in the future. Additionally, 27703 allows for the integration of a second compressor into this management system for added performance.
Show More Show Less

Air Lift - Corporate Logo
T#:26038562
Part#: 26498-006
In Stock at Vendor
$ 429.99 USD
Free Shipping on orders $49 and up
Elevate your BMW's Air Lift 3H or 3P management system with this standard wiring harness. Specifically designed to power a single compressor, it ensures seamless functionality. For those opting for dual compressors, the Air Lift 3H / 3P Second Compressor Harness is necessary for optimal performance.
  • Compatible with Air Lift 3H and 3P management systems
  • Powers a single compressor
  • Ensures seamless functionality
  • Necessary for dual compressor setup
Show More Show Less

Koni - Corporate Logo
T#:26638253
Part#: 8250 1024
Back Ordered
$ 152.99 USD
Free Shipping on orders $49 and up
Replace your broken or failing shock with this Koni replacement.
Air Lift - Corporate Logo
T#:377950
Part#: 12957
In Stock at Vendor
$ 198.99 USD
Free Shipping
$ 198.99 USD
Free Shipping
Customizing your car is all about choices and when it comes to your air tank, that should be no different. With Air Lift aluminum tanks, they can offer you a wide variety of sizes, port configurations, and finishes. Their extruded aluminum tanks are now available in raw aluminum or in a super high quality polished finish. If the look of aluminum is not really your thing, simply take your tank to your favorite powder coating or anodizing shop for a show stopping finish. Whether you decide on a splash of color or bare aluminum, you cannot go wrong with the look of an Air Lift Performance tank! Another huge benefit with their aluminum tanks is the tremendous weight savings you will see over a standard steel tank. Less weight can mean faster lap times and improved weight distribution. Features: (4) 1/4" Face Ports (2) 3/8" End Ports (1) 1/4" Drain Port 200 PSI Maximum Working Pressure Polished Aluminum Tank Dimensions: 30" L x 6" H x 7.5" H Fitting packs (available separately): 1/4" V2 Management Fitting Pack - ES#2862253 3/8" V2 Management Fitting Pack - ES#2862254 1/4" Manual Management Fitting Pack - ES#2862265
Show More Show Less
E82 128i/135i H&R Sport Cup Kit Suspension Package
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:4325
Part#: 31054-6
Ships in 3 Business Days
$ 1,180.00 USD
Free Shipping
$ 1,180.00 USD
Free Shipping
  • Matching Shock & Spring Package
  • Comparable to a H&R Super Sport spring - aggressive upgrade over stock
  • Vastly improved handling but with less ride comfort

This H&R Sport Cup Kit is for drivers who want that extra edge from a stiffer suspension but without the expense and complexity of coil overs. The E82 Sport Cup Kit is a more aggressive version of the Touring kit. The ride height lowers the center of gravity and roll center even more and the springs are stiffer for more control over body motions and weight transfer. The Sport Cup Kit lowers the ride height as much as 2.2" in front and 1.5" in the back. The springs are still progressive rate so the ride stays compliant on small bumps but quickly gets stiffer. Overall, they are about 50% stiffer than the stock original springs. Lowering amount will be less if replacing the factory sport suspension. If you want a very precise and firm suspension, and ride quality is secondary, the Sport Cup Kit is superior to the Touring or any other shock/spring package we offer. This package fits with the stock strut and shock mounts but front camber plates are recommended because of the increased front negative camber.

This H&R Cup Kit is a tuned shock/spring package for the E82 128i and 135i. H&R matches a set of springs to performance shocks for a perfectly setup and functioning suspension package. Instead of mixing and matching springs with shocks, H&R has tailored each shock for the specific model, taking into account spring rates, chassis setup, and suspension motions. Without the shocks and springs engineered together the suspension may have incorrect travel or be a mis-match for spring rate (under-dampened) or too stiff. This E82 Cup Kit addresses all of that.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2008-2012 E88 BMW 128i Convertible 135i Converible
Show More Show Less


Whiteline - Corporate Logo
T#:26638229
Part#: W53453
Ships in 3 Business Days
$ 68.99

This product was last offered at the strikethrough price on
10-01-2026

$ 63.99 USD
Free Shipping on orders $49 and up
$ 63.99 USD
Free Shipping on orders $49 and up
Following thorough development and testing of materials aimed at providing strength, durability, geometry retention, and memory without sacrificing comfort, WHITELINE has introduced a progressive, long-chain Synthetic Elastomer. This innovative material combines the physical benefits of solid bushings with the flexibility of rubber, offering enhanced performance characteristics.
Show More Show Less
Yellow Adjustable Front Strut - Left
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389438
Part#: D140-0943
Ships in 5 Business Days
Sale - Save 10% $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 421.15 USD
Free Shipping
Sale - Save 10%
$ 467.99

This product was last offered at the strikethrough price on
09-28-2026

$ 421.15 USD
Free Shipping
Air Lift - Corporate Logo
T#:377949
Part#: 12955
In Stock at Vendor
$ 194.99 USD
Free Shipping
$ 194.99 USD
Free Shipping

When it comes to customizing your BMW, options matter. Elevate your air tank game with Air Lift aluminum tanks, offering a plethora of sizes, port configurations, and finishes. Choose from raw aluminum or polished finish for a sleek look. Alternatively, customize with your preferred powder coating or anodizing for a personalized touch. Enjoy the weight-saving benefits of aluminum, enhancing performance with faster lap times and improved weight distribution. With Air Lift Performance tanks, elevate your BMW's aesthetics and performance effortlessly.

Features:

  • (2) 1/4" End Ports
  • (2) 3/8" End Ports
  • (1) 1/4" Drain Port
  • 200 PSI Maximum Working Pressure
  • Polished Aluminum Tank
  • Dimensions: 30" L x 6" H x 7.5" H

Fitting packs (available separately):

  • 1/4" V2 Management Fitting Pack - ES#2862251
  • 3/8" V2 Management Fitting Pack - ES#2862252
  • 1/4" Manual Management Fitting Pack - ES#2862264
Show More Show Less

Whiteline - Corporate Logo
T#:26938504
Part#: W63403
Ships in 3 Business Days
$ 81.99

This product was last offered at the strikethrough price on
10-01-2026

$ 75.99 USD
Free Shipping on orders $49 and up
$ 75.99 USD
Free Shipping on orders $49 and up
After comprehensive development and rigorous material testing focused on achieving strength, durability, geometry retention, and memory without compromising comfort, WHITELINE has achieved a breakthrough with its progressive, long-chain Synthetic Elastomer. This innovative material seamlessly combines the advantageous properties of solid bushings with the extreme flexibility characteristics of rubber, resulting in an unmatched balance of performance and comfort.
Show More Show Less

Air Lift - Corporate Logo
T#:377941
Part#: 23444
Ships in 4 Business Days
$ 513.99 USD
Free Shipping
$ 513.99 USD
Free Shipping

Air Lift Viair 444C Dual Pack Compressor - 200 PSI - Chrome offers a significant upgrade for BMW air suspension systems, delivering superior performance and reliability. Engineered by Turner Motorsport, these compressors are designed to enhance efficiency and durability.

  • Newly-Developed Intercooler Head: Improves compressor efficiency and performance.
  • Stainless Steel Braided Leader Hoses: Includes inline check valve assembly for enhanced protection against high amperage restarts.
  • Chrome Finish: Provides increased durability and a sleek, aesthetic appeal.
  • Complete Kit: Includes air filter assemblies, remote mount brackets, fittings, spare air filter elements, nuts, bolts, washers, lock washers, and airline clips.
  • Easy Installation: Compatible with various air suspension setups for a hassle-free upgrade.

Upgrade your BMW's air suspension system with the Air Lift Viair 444C Dual Pack Compressor for top-tier performance and durability.

Show More Show Less
Air Lift - Corporate Logo
T#:370659
Part#: 58130
In Stock at Vendor
$ 134.99 USD
Free Shipping
$ 134.99 USD
Free Shipping

Tubular Adjustable Front Anti-Roll Bar - 28mm
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389101
Part#: D120-0530
Ships in 5 Business Days
Sale - Save 10% $ 599.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 539.96 USD
Free Shipping
Sale - Save 10%
$ 599.99

This product was last offered at the strikethrough price on
09-28-2026

$ 539.96 USD
Free Shipping
Rogue Engineering - Corporate Logo
T#:35829340
Part#: RE_E9X_CAMNO
Ships in 8 Business Days
$ 595.00 USD
Free Shipping on orders $49 and up

Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0 is the ultimate upgrade for BMW enthusiasts seeking enhanced handling, improved tire wear, and precise suspension tuning. This high-performance solution is engineered to fit BMW E82 1-Series and E9X 3-Series models, offering superior adjustability and durability over OEM components. Ideal for street and track use, this camber link set is crafted from premium materials to ensure strength and long-lasting performance.

Key Features:

These replace the wishbone and guide arm links in the factory suspension which have rubber bushings and limited adjustment. Enhanced suspension adjustability for optimized alignment Improves handling and reduces uneven tire wear Compatible with BMW E82 1-Series and E9X 3-Series models Constructed from high-strength materials for durability and reliability Perfect for both street performance and track applications Turner Motorsport proudly offers the Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0, providing BMW drivers with unmatched performance and precision.

Show More Show Less

Vargas Double Adjust Drag Shock Kit - BMW E9X 3
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778132
Part#: VTT-E9/8X-DRAG-S
Ships in 10 Business Days
New Item
$ 1,104.99 USD
Free Shipping
$ 1,104.99 USD
Free Shipping
The VTT BMW E9X/E8X Double Adjust Drag Shock Kit is the ultimate suspension upgrade for serious enthusiasts looking to shave seconds off their ET.

Revshift - Corporate Logo
T#:47199272
Part#: PSB-E9X-80A
Ships in 1 Business Day
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less
Revshift - Corporate Logo
T#:47199274
Part#: PSB-E9X-75D
Ships in 7 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less
Ohlins - Corporate Logo
T#:37217373
Part#: BMS2-40
Ships on Oct 16, 2026
$ 675.99 USD
Free Shipping on orders $49 and up