Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.
RF style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market.
Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come with a black painted finish and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.
Please Note: Aggressive fitment, may require fender rolling or pulling.
Specs:
BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.
CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.
Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Black painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.
Please Note: Aggressive fitment, may require fender rolling or pulling.
Specs:
BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.
CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.
Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Brilliant Silver painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.
Please Note: Aggressive fitment, may require fender rolling/pulling.
Specs:
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-27-2026
V710 18" Wheels - Staggered Set Of Four will transform your BMW's appearance and performance with their striking design and advanced engineering. These Style 710 wheels are crafted with a motorsport-inspired theme, featuring a split seven-spoke design and the deepest concave profile in VMR’s lineup.
By opting for a staggered setup, drivers can enhance their vehicle's grip and handling, ensuring an aggressive stance that commands attention on the road. The lightweight construction of these wheels not only improves performance but also contributes to a more responsive driving experience.
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x9.5" |
| Offset (mm): | 33 |
| Weight (lbs): | 22.5 |
| Profile: | 3, deep dish |
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-27-2026
APEX EC-7 18" Max Wdith Staggered Wheel Set -- 18x10" / 18x11"
You can't get much bigger than this on the E9X M3 and 1M! This is an extreme width set using a 10.0" ET25 in the front and an 11.0" ET25 in the rear. Fitting this wide of a wheel on the E9X M3 is not a direct bolt on and tire sizes must remain conservative. Max tire sizes used in testing were a 275/40 in the front and a 295/30 in the rear. Significant trimming of plastic fender liners and fender rolling is required, as well as a custom alignment (camber plates may be required). This is about as wide as you can go on the E9X M3. If you want to jam as much wheel into the fender as possible, with a stretched tire, this is the set for you.
APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.
Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Anthracite 18x9.5" ET58 APEX ARC-8 Wheel.
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):58
Weight (lbs):18.2
Profile:Flat, not concave
APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.
All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.
Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!
Price is per wheel.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-27-2026
Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.
18x9.5 ET45 VMR V710 - Gunmetal is a standout choice for those seeking a distinctive upgrade in their vehicle's appearance. The VMR Wheels V710 is renowned in the aftermarket wheel market for its striking design and visual appeal.
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x9.5" |
| Offset (mm): | 33 |
| Weight (lbs): | 22.5 |
| Profile: | 3, deep dish |