Black wheels are a popular and compelling wheel trend. These are the factory Style 220 M3 wheels in a glossy Jet Black. We think these look great on a lot of E90/E92 colors, especially on darker colors. These are factory BMW wheels, not replicas, so there is no question on the quality of the black paint and finish. These are a direct fit in the factory sizes and offsets to all E90/E92/E93 M3 and the 1M Coupe.

Style 220 wheel set includes -

• 2 x 19x8.5" ET29 BMW Style 220 Individual Jet Black forged alloy wheel (BMW #36117842933)
• 2 x 19x9.5" ET22 BMW Style 220 Individual Jet Black forged alloy wheel (BMW #36117842933)
• 4 x BMW wheel center caps

Recommended Tire Sizes (by BMW):
Front Tire - 245/35/19
Rear Tire - 265/35/19

For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

This item fits the following BMWs:
2011 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 Sedan
2008-2012 E92 BMW M3 Coupe
2008-2012 E93 BMW M3 Convertible

This set of OEM TPMS sensors is the perfect complement to a new set of wheels or to refresh the sensors on your existing wheels. This set includes four OEM Huf sensors with grey valve stems and hardware. A new set of sensors is the best option for new wheels so you won't have to deal with the TPMS fault on your dash/iDrive or pull the sensors off your old wheels.

This is the early-style sensor for cars made before 2009/2010 (see full application list for exact fitments).

Used on a wide variety of both BMW and MINI wheels. Best to replace whenever new tires are being installed.

Genuine BMW Rubber Valve - L=42,5Mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3i12
 

ECS Tuning proudly introduces extended wheel bolts specifically designed for your Mini. These bolts can be obtained individually or in conjunction with precisely matched spacers, eliminating the guesswork in achieving the correct fitment. Crafted to meet the stringent ISO 898 class 10.9 standards, these high-quality bolts adhere to strict guidelines concerning material properties, hardening, tempering requirements, and proof load strength. Rigorously lab-tested for compliance, these fasteners ensure unparalleled reliability and safety.

Specifications for the bolts:

• Diameter - 12mm
• Thread Pitch - 1.5mm
• Length - 28mm

Note: When integrating wheel spacers, it's crucial to add the spacer size to the OE wheel bolt length to ensure proper fitment (e.g., 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Requires a 42mm Length Bolt).

• Precisely matched for accurate fitment
• Complies with ISO 898 class 10.9 standards
• Lab-tested for reliability and safety
• Detailed bolt specifications provided for easy selection

• 75MM, 85MM, or 95MM LENGTHS
• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (red Turbo-Lock or similar).

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

MSI Racing specializes in hardware for motorsports and other advanced industries and their wheel studs are some of the very best in the professional motorsports world. MSI is already a major supplier to teams in the top NASCAR categories and we tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well. These studs are available in multiple lengthsand all sizes are made with aircraft quality material and have roll formed threads. The coating is a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. This coating process reduces friction and wear to prevent thread galling. Another benefit is that these have the best corrosion resistance we have seen in any wheel stud! A dry lube stud has the most corrosion resistance than a plain black coating because the lube is applied over the black phosphate coating. Salt tests have shown this stud is superior to others in corrosion resistance. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations.

These studs are the perfect choice for endurance racers, sprint racers, track-only cars, or even hardcore street cars. The bullet nose on this stud is deeper than other studs we have used. More of the stud protrudes through the open nut so that everything lines up better on the threads. This helps to eliminate the possibility of cross-threading or thread stripping. In addition, the shank has been machined for proper brake rotor alignment. The dry lube helps the nut engage and glide over the threads for faster pit stops without cross threading or binding.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

Sold per stud.
Wheel nuts sold separately.

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

• Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
• Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
• Easy Installation: Simple to install and compatible with most standard valve stems.
• Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
• Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

034Motorsport Aluminum Valve Stem Cap Set is the perfect upgrade from standard plastic caps, offering both style and durability. Designed for high-performance driving, these aluminum caps resist heat expansion and withstand extreme conditions, ensuring a secure fit on your valve stems.

• All-Aluminum Construction: Durable and heat-resistant, ideal for high-performance applications.
• Hexagonal Shape: Allows for easy installation and adjustment with a standard wrench.
• Black Satin Finish: Sleek appearance that complements any wheel setup.
• 034 Logo: Featuring a clear polyurethane dome for added protection and style.
• O-Ring Seal: Provides a secure, leak-proof fit.
• TPMS Compatibility: Designed to fit all standard automotive valve stems and is compatible with most tire pressure monitoring systems.

• Diameter: 12mm
• Thread Pitch: 1.5mm
• Length: 26mm
• Compliant with ISO 898 class 10.9 standards
• Thorough lab testing for class 10.9 compliance

Introducing the TPMS Starter Kit! Dive into TPMS servicing with ease using the included TPMS service tool and four sensors. Plus, enjoy peace of mind with our LIFETIME REPLACEMENT program, ensuring this kit remains by your side for the long haul!

T2000WF Wi-Fi TPMS SERVICE TOOL:

The Foxwell T2000WF is a professional TPMS diagnostic and maintenance tool that can activate and decode universal TPMS sensors, program TPMS, and diagnose any OEM tire pressure monitoring system. Featuring updated hardware for quicker operation and all-new software for increased capability, the T2000WF provides a complete, full-service solution for owners of TPMS-equipped vehicles.

Key Features:

Sensor Activation and Decoding: The T2000WF can activate and read data from universal TPMS sensors, ensuring they function correctly.

Sensor Programming: Allows for programming TPMS sensors to replace faulty ones or install new sensors when needed.

System Diagnostics: This tool diagnoses the vehicle's TPMS to identify and troubleshoot issues within the system.

WiFi Connectivity: The 'WF' in T2000WF indicates WiFi capabilities, enabling wireless updates and seamless data transfer.

User-Friendly Interface: Designed with an intuitive interface to facilitate ease of use for technicians and automotive enthusiasts.

This tool suits automotive professionals and enthusiasts seeking a reliable solution for TPMS-related services. If you're in need of a comprehensive, full-service diagnostic tool for your Tire Pressure Monitoring System equipped vehicle, look no further than the Foxwell T2000WF.

RUBBER T10 TPMS SENSORS:

The Foxwell TPMS sensor integrates 315MHz and 433MHz dual frequency and can replace more than 96% of the OEM sensors on the market. Sensors can easily be activated and programmed by any TPMS tool on the market.

Features:

Rubber valve stem. 315MHz and 433MHz dual frequency. High precision air valve to avoid air leakage. 0-30 degree adjustability. Build in battery with an extended service life (more than 5 years) Temperature reading range -40F - 257F Pressure monitoring range 0 to 130.53psi Weight - 12G