BMW Tools & Specialty Equipment for BMW 1 Series E82 (2008-2013)

Schwaben 3-Liter European Pressure Brake Bleeder with Catch Bottle ...

T#:26504945

Part#: 007237SCH01A02KT

Ships on Sep 30, 2026

Sale - Save 17% $ 93.99

This product was last offered at the strikethrough price on
05-05-2026

$ 78.19 USD

Add to Wish List

Qty

Sale - Save 17%

$ 93.99

This product was last offered at the strikethrough price on
05-05-2026

$ 78.19 USD

Add to Wish List

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

Holds a full 3-Liters (3.17 qts) of brake fluid
Easy to read 0-30 lbs pressure gauge built into the tank top
Pressure relief valve for safe release of pressure
40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle. The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system. Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

Do not exceed 20 PSI
LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Wheel Storage Rack With Casters With Tire Stack Cover

T#:26505028

Part#: 003639SCH01A02KT

In Stock

Sale - Save 18% $ 97.99

This product was last offered at the strikethrough price on
05-05-2026

$ 79.99 USD

Add to Wish List

Qty

Sale - Save 18%

$ 97.99

This product was last offered at the strikethrough price on
05-05-2026

$ 79.99 USD

Add to Wish List

WHEEL STORAGE RACK:

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

TIRE STACK COVER:

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
Durable 150D coated material is rated for outdoor use.
Cover is a large 32" wide X 46" tall.
Fitted with a long 29" zipper up the side for easy installation and removal.
Nylon draw string at the bottom allows for a good snug fit.
Includes a handy storage pouch if not in use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Wheel Lock Removal Set - for OEM BMW wheels

T#:5175718

Part#: AGA-WLRT

In Stock

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

Easily removed wheel locks that are stripped or the key cannot be found.

46 Piece 1/4" Drive Set With 5 Piece Trim/Molding Tool Kit

T#:26505020

Part#: 010747SCH01A02KT

In Stock

Sale - Save 25% $ 120.99

This product was last offered at the strikethrough price on
05-05-2026

$ 91.21 USD

Add to Wish List

Qty

Sale - Save 25%

$ 120.99

This product was last offered at the strikethrough price on
05-05-2026

$ 91.21 USD

Add to Wish List

46 PIECE SET:

This 1/4" set contains all the most popular tools needed to get the job done on your European car repair.

Kit Contains:

-13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM

-1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).

-2PC- 1/4" DR.50 & 100MM EXTENSIONS

-1PC- 1/4" DR.150MM FLEXIBLE EXTENSION

-1PC- 1/4" DR.UNIVERSAL JOINT

-1PC- 1/4" DR.SLIDING T-BAR

-1PC- 1/4" DR.6" SPINNER HANDLE

-1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER

-4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM

-6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM

-3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM

-3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3

-3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3

-6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

TRIM/MOLDING SET:

Plastic five-piece tool kit removes trim and door panels, moldings, and adhesive backed logos and badges, without damage.

Made of impact resistant plastic that will not mar surfaces as metal screwdrivers and pry bars will. Slim design for delicate work in tight areas.

Kit includes:

Wide edge remover
Narrow edge remover
Pull-type remover
Handle remover
Upholstery clip remover

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Drive Shaft Wrench

T#:5189118

Part#: AGA-DSW-50

Ships in 8 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This tool is a must to properly disconnect the driveshaft.

6.5 Liter Fluid Extractor with Brake Bleeding Adapter - Bundle ...

T#:26504984

Part#: 011885SCH01A02KT

Ships on Sep 24, 2026

Sale - Save 25% $ 144.99

This product was last offered at the strikethrough price on
07-31-2026

$ 108.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 144.99

This product was last offered at the strikethrough price on
07-31-2026

$ 108.74 USD

Add to Wish List

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
Organized Efficiency: Integrated hose storage streamlines your extraction process.
Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose. This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Manual Bushing Installation And Removal Tool Set

T#:711897

Part#: OEM27212

Ships in 8 Business Days

Sale - Save 10% $ 301.99

This product was last offered at the strikethrough price on
08-23-2026

$ 271.00 USD

Add to Wish List

Qty

Sale - Save 10%

$ 301.99

This product was last offered at the strikethrough price on
08-23-2026

$ 271.00 USD

Add to Wish List

Comprehensive kit for fast and effective removal/installation of wheel bearings/suspension bushings and seals.

Drive Shaft Holder

T#:5175755

Part#: AGA-DSH-40

Ships in 8 Business Days

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Now removing the driveshaft can be a single man job!

BMW E60 M5 Crank Case Test Cap

T#:6924319

Part#: AGA-6061-TC

Ships in 8 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.

Show More Show Less

Brake Pressure Bleeder

T#:5189146

Part#: AGA-BPB-1000

Ships in 8 Business Days

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

Make bleeding brakes a one man job!

Aluminum 3-Ton Jack Stands With Mechanic's Folding Ground Pad - Set O...

T#:26505022

Part#: 005945SCH01A02KT

In Stock

Sale - Save 20% $ 165.99

This product was last offered at the strikethrough price on
05-05-2026

$ 132.11 USD

Add to Wish List

Qty

Sale - Save 20%

$ 165.99

This product was last offered at the strikethrough price on
05-05-2026

$ 132.11 USD

Add to Wish List

Aluminum 3-Ton Jack Stands With Mechanic's Folding Ground Pad - Set Of 2 are designed for exceptional performance and convenience in automotive maintenance. These lightweight aluminum jack stands provide robust support, while the mechanic's folding ground pad ensures comfort during vehicle work.

Lightweight Construction: Each jack stand weighs only 4.7 lbs, making them easy to handle without sacrificing strength.
Durable Design: All-aluminum construction with heavy-duty flanged bases ensures stability and safety for loads up to 3 tons.
Adjustable Heights: Features 6 locking positions with a minimum height of 10.6 inches and a maximum height of 15.4 inches.
Secure Load: Extra heavy-duty load pin with a posi lock ball mechanism keeps the pin securely in place.
Large Base: Equipped with a 7-inch diameter base for enhanced stability.
Mechanic’s Ground Pad: Provides comfort with high-density foam and a heavy-duty cover that resists oils and fluids. Measures 17"W x 47"L when unfolded and includes built-in carrying handles.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

3/8" Drive Long Flex Head Ratchet with 3/8" Drive 6 Point Socket Set ...

T#:26505003

Part#: 005981SCH01A03KT

In Stock

Sale - Save 41% $ 67.99

This product was last offered at the strikethrough price on
05-05-2026

$ 40.15 USD

Add to Wish List

Qty

Sale - Save 41%

$ 67.99

This product was last offered at the strikethrough price on
05-05-2026

$ 40.15 USD

Add to Wish List

3/8" DRIVE LONG FLEX HEAD RATCHET:

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

Special designed 72T gear mechanism
5 degree of handle movement between gears
Flex head has 7 detent positions in a 180 degree swing
Push button release holds socket tight until you are ready to release
Ratchet is a full 290mm ( 11") long for extra leverage.

3/8" DRIVE 6 POINT SOCKET SET:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

8mm
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm

LIFETIME REPLACEMENT on all items in this kit!

Show More Show Less

Carista Bluetooth OBD2 Adapter - BMW & Mini

This application supports advanced diagnostics, customizations

T#:391453

Part#: COBD-BT24

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Carista is a smartphone application for both iOS and Android devices that allows owners to diagnose vehicle faults, reset service indicators, and customize vehicle systems without any complicated coding. In order to use Carista on your vehicle, only three things are required: An iPhone, iPad, or iPod touch running iOS 8.0 or later OR an Android device running Android 2.3 and up The Carista OBD2 App: Available on the Apple AppStore and Google Play Bluetooth OBD2 Adapter: Available HERE! Uses Bluetooth 4LE which prevents drainage to the car's battery due to it's power saving mode. Since the adapter is Bluetooth, the Wi-Fi connection on your mobile device remains open so you can still browse the internet while still remaining connected to the vehicle. The Carista Bluetooth OBD2 Adapter is also compatible with the OBD Fusion app on iOS and Android. Diagnose (OBD2): Carista can check your vehicle's health and report any faults stored in its computers. You can also clear any fault codes and reset your "check engine" light, as emissions test readiness. This is a FREE feature. Diagnose (Manufacturer-Specific): Unlike regular OBD2 apps, Carista also gives you access to advanced manufacturer-specific diagnostics, including computers like ABS, airbag, navigation, etc. and gives you the ability to reset your airbag light, ABS light, traction control light, etc. Manufacturer-Specific Diagnosis is a PAID feature; supported vehicles only. Customization: Carista gives you the power to personalize the behavior of your car’s windows, lights, instruments and more, with a click of a button. Customization is a PAID feature; supported vehicles only. Service: With Carista’s DIY tools, resetting your oil service indicator, servicing your electronic parking brake or checking your launch control count becomes a 1-click action. This is a PAID feature; supported vehicles only. Pricing: All PAID features listed above are available with an in-app purchase of Pro functionality: complimentary 1 month trial included, annual subscriptions are $39.99/year.

Show More Show Less

Baum Tools BMW Fuel Injector Puller & Seal Installation Tool Set - BM...

T#:638905

Part#: B130270KPLUS

In Stock

$ 112.40

This product was last offered at the strikethrough price on
06-03-2026

$ 102.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 112.40

This product was last offered at the strikethrough price on
06-03-2026

$ 102.99 USD

Limited Qty Sale

Add to Wish List

Used to pull injectors, and comes with necessary tools for installing replacement injector Teflon seals. Works with: N54, N63 & S63 engines

Hex Low Profile Service Sockets

T#:5175654

Part#: AGA-SS-8-14-K

Ships in 8 Business Days

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

Due to minimal clearance, it’s difficult to get a hex socket in the gaps to remove plugs on rear differentials, transfer case and other engine drain/fill plugs.

7 pc. 3/8" Dr. Spark Plug Socket Set

T#:641915

Part#: 8845D

Ships in 7 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Complete set of spark plug sockets.

Torque Wrench Adapter

T#:5189117

Part#: AGA-STA

Ships in 8 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Easily torque your driveshaft to specifications.

AGA Tools Oil Drain Plug Repair Kit

T#:5484733

Part#: AGA-ODP-12-14-K

Ships in 8 Business Days

$ 895.99 USD

Add to Wish List

Qty

$ 895.99 USD

Add to Wish List

Using the AGA Drain Plug Repair Kit will allow you to repair the stripped drain plug without having to remove the oil pan.

AGA Tools Slide Hammer

T#:5269509

Part#: AGA-WLRT-SH

Ships in 8 Business Days

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

Easily remove those stubborn bearings or dents from your car.

Valve stem seal pliers

T#:5189207

Part#: AGA-SRP-N63

Ships in 8 Business Days

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

AGA Tools has manufactured custom pliers to make the removal and installation of valve stem seals quick and easy for any engine.

Vargas Head Port Block Off Kit - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778137

Part#: VTT-OCC-1-HEAD-P

Ships in 7 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Engineered for high-performance BMW applications, the Vargas Head Port Block-Off Kit solves the issue of crankcase pressure management in N54 engines.

BMW Fuel Injector Seal Pliers And Seal Installers

T#:641886

Part#: B130190KIT

Ships in 6 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Includes 130190, 130191 and 130280

VTT “Spline Lock” Hub Puller

2X Entries Into Our F80 M3 Sweepstakes

T#:27638813

Part#: CRANK-PULLER-S55

Ships on Sep 16, 2026

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

If you have a Spline lock installed they can be nearly impossible to get out without a proper puller. We designed these just for removing the hubs. When removed yours have your cut splines in the crank, on reassembly simply line the splines back up, and follow factory TQ, and stretch procedures on the new bolt.

Show More Show Less

Oil Pressure Test Kit

T#:5691132

Part#: OEM27262

Ships in 7 Business Days

Sale - Save 11% $ 135.99

This product was last offered at the strikethrough price on
08-23-2026

$ 121.70 USD

Add to Wish List

Qty

Sale - Save 11%

$ 135.99

This product was last offered at the strikethrough price on
08-23-2026

$ 121.70 USD

Add to Wish List

Test your oil pressure with this complete kit.

Jack Rod Stand

T#:5175707

Part#: AGA-JR-8-14

Ships in 8 Business Days

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Turn a tradition jack into a jack stand as well.

Valvetronic Spring R&R

T#:641924

Part#: B117110

Ships in 6 Business Days

$ 414.64 USD

Add to Wish List

Qty

$ 414.64 USD

Add to Wish List

To remove select main springs on the cam system

N54 Fuel Injector Remover

T#:2824950

Part#: 130180

Ships in 6 Business Days

$ 87.99 USD

Add to Wish List

Qty

$ 87.99 USD

Add to Wish List

To be used for fuel injector removal.

BMW Oil Pump Sealing Cap Installer Kit N53, N54, N55

T#:2824955

Part#: 2318119

Ships in 6 Business Days

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

Used to remove and install the vacuum pump sealing cover

8 Piece Jumbo Combination Wrench Set (21 Mm - 32 Mm)

T#:697859

Part#: OEM22120

Ships in 7 Business Days

Sale - Save 11% $ 108.99

This product was last offered at the strikethrough price on
08-23-2026

$ 97.34 USD

Add to Wish List

Qty

Sale - Save 11%

$ 108.99

This product was last offered at the strikethrough price on
08-23-2026

$ 97.34 USD

Add to Wish List

Includes Canvas Rollup Storage Bag to Protect the Wrenches During Transportation and Organized for Storage

7-Piece Oxygen Sensor Socket Set

T#:5282862

Part#: 2850

Back Ordered

11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Qty

11% off MSRP

$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models

14 Pc. Full Polish SAE Angle Head Wrench Set

T#:642035

Part#: 9914A

Ships on Sep 23, 2026

$ 113.91 USD

Add to Wish List

Qty

$ 113.91 USD

Add to Wish List

Radius V-Groove design creates an anti-slip while also preventing round-off.

3/8" Drive Long Flex Head Ratchet With 1/2" Drive Long Flex Head Ratc...

T#:26505030

Part#: 005981SCH01A04KT

In Stock

Sale - Save 17% $ 60.98

This product was last offered at the strikethrough price on
05-05-2026

$ 50.60 USD

Add to Wish List

Qty

Sale - Save 17%

$ 60.98

This product was last offered at the strikethrough price on
05-05-2026

$ 50.60 USD

Add to Wish List

3/8-INCH DRIVE LONG FLEX HEAD RATCHET:

This professional quality flex ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is especially useful in tight areas. Flex head has 7 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release. No more dropped sockets. Ratchet is a full 290mm ( 11") long for extra leverage.

Part of our LIFETIME REPLACEMENT PROGRAM

1/2-INCH DRIVE LONG FLEX HEAD RATCHET:

This 1/2" drive flex head ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is especially useful in tight areas. Flex head has 9 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release. No more dropped sockets.

Part of our LIFETIME REPLACEMENT program

Show More Show Less

12 Pc Metric Combination Wrench Set with 9 Piece Scraper, Hook, And P...

T#:26505018

Part#: 005989SCH01A03KT

In Stock

Sale - Save 15% $ 95.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.47 USD

Add to Wish List

Qty

Sale - Save 15%

$ 95.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.47 USD

Add to Wish List

COMBINATION WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

A complete set from 8 to 19 mm
Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
Includes sturdy wrench holder for easy storage

SCRAPER, HOOK, AND PICK SET:

Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips. This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

3" Blade MINI Awl, 90°, Hook, and Curve
6" Blade Awl, 90°, Hook, and Curve
6" x 1" wide scraper

Everything in this kit comes with LIFETIME REPLACEMENT.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Heavy-Duty 1/2" Electric Impact Wrench

T#:3672431

Part#: OEM24666

Ships in 7 Business Days

Sale - Save 10% $ 120.99

This product was last offered at the strikethrough price on
08-23-2026

$ 108.42 USD

Add to Wish List

Qty

Sale - Save 10%

$ 120.99

This product was last offered at the strikethrough price on
08-23-2026

$ 108.42 USD

Add to Wish List

No air hose needed with this powerful electric Impact

Heavy-Duty 1/2" Drive Cordless Li-ion Impact Wrench

T#:641228

Part#: OEM24481

Ships in 7 Business Days

Sale - Save 10% $ 255.99

This product was last offered at the strikethrough price on
08-23-2026

$ 230.33 USD

Add to Wish List

Qty

Sale - Save 10%

$ 255.99

This product was last offered at the strikethrough price on
08-23-2026

$ 230.33 USD

Add to Wish List

Try the convenience of cordless power tools.

VTT “Spline Lock” Hub Puller

2X Entries Into Our F80 M3 Sweepstakes

T#:27638810

Part#: CRANK-PULLER-N54

Ships on Sep 16, 2026

$ 73.99 USD

Add to Wish List

Qty

$ 73.99 USD

Add to Wish List

If you have a Spline lock installed they can be nearly impossible to get out without a proper puller. We designed these just for removing the hubs. When removed yours have your cut splines in the crank, on reassembly simply line the splines back up, and follow factory TQ, and stretch procedures on the new bolt.

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Red) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921504

Part#: VTT-HH-RED-BOTH

Ships on Sep 16, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

3/4 Ton Engine Leveler

T#:1377515

Part#: OEM24831

Ships in 7 Business Days

Sale - Save 10% $ 169.99

This product was last offered at the strikethrough price on
08-23-2026

$ 152.71 USD

Add to Wish List

Qty

Sale - Save 10%

$ 169.99

This product was last offered at the strikethrough price on
08-23-2026

$ 152.71 USD

Add to Wish List

Use with a engine crane for easier engine installation

VTT Billet Cylinder Head Lifting Tool (Black) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921506

Part#: VTT-HH-BLK-BOTH

Ships on Sep 16, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Blue) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921479

Part#: VTT-HH-BLUE-BOTH

Ships on Sep 16, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

7" Variable Speed Polisher

T#:641233

Part#: OEM24496

Ships in 7 Business Days

Sale - Save 10% $ 178.99

This product was last offered at the strikethrough price on
08-23-2026

$ 161.00 USD

Add to Wish List

Qty

Sale - Save 10%

$ 178.99

This product was last offered at the strikethrough price on
08-23-2026

$ 161.00 USD

Add to Wish List

Every thing you need to except the polish.

3-Ton Jack Stands - Pair

T#:1362398

Part#: OEM24852

Ships in 7 Business Days

Sale - Save 11% $ 120.99

This product was last offered at the strikethrough price on
08-23-2026

$ 108.23 USD

Add to Wish List

Qty

Sale - Save 11%

$ 120.99

This product was last offered at the strikethrough price on
08-23-2026

$ 108.23 USD

Add to Wish List

Safe and secure for Garage use

Vargas "Head Handler" Cylinder Head Lifting Tool - Blue - Long - BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918854

Part#: VTT-HHBLULONG

Ships on Sep 16, 2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas Head Handler provides maximum versatility, specifically catering to those who need to remove/install a cylinder head with the camshafts in place.

Direct fuel injector tool kit without sockets

T#:5175746

Part#: AGA-DFI-KIT

Ships in 8 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Vargas "Head Handler" Cylinder Head Lifting Tool - Black - Long - BMW...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918853

Part#: VTT-HHBLKLONG

Ships on Sep 16, 2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas Billet "Head Handler" is the ultimate solution for BMW technicians and enthusiasts who frequently handle heavy cylinder heads.

AGA Tools Thread Forming Tap - M14 x 1.5

T#:5484734

Part#: AGA-ODP-TFT-14

Ships in 8 Business Days

$ 88.99 USD

Add to Wish List

Qty

$ 88.99 USD

Add to Wish List

Perfect for stripped threads or cleaning threads.

Vargas "Head Handler" Cylinder Head Lifting Tool - Red - Long - BMW N...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918855

Part#: VTT-HHREDLONG

Ships on Sep 16, 2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Designed for the high-volume BMW specialist, the VTT "Head Handler" eliminates the struggle and risks associated with manually lifting heavy cylinder heads.

Clean Oil Drain Tool

T#:5135643

Part#: AGA-CODT-1

Ships in 8 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Change the way you change oil

Project Cars

SELECT YOUR BMW

BMW Tools & Specialty Equipment for BMW 1 Series E82 (2008-2013)

Sub-Categories

BMW E60 M5 Crank Case Test Cap

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results