BMW Tools & Specialty Equipment for BMW 1 Series E82 (2008-2013)

Precision Raceworks N54/N55 Fuel Injector Tool - BMW N54 N55 3.0L ...

T#:1316809

Part#: 601-0005

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Precision Raceworks' Fuel Injector Removal and Installation Tool is one of the highest-rated tools on the market, not only for removal and installation of injectors but also for the installation and compression of the high-pressure seals! For injector removal, simply thread the tool onto the input of the fuel injector and use the slide hammer to tap the injector out. When installing new seals, simply use needle-nose pliers to pinch the old seal and remove it. Once removed, the new seal can be installed using the included expansion tool found stored inside the shaft of the tool. The rest is as easy as 1, 2, 3! Insert the injector into die #1 and count to 10, then insert the injector into die #2 and count to 20, finally insert the injector into die #3 and count to 30, then install your injector.

Show More Show Less

Screw Cap & Schwaben Removal Tool Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:401619

Part#: 16116762417KT1

In Stock

Sale - Save 18% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD

Add to Wish List

Qty

Sale - Save 18%

$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD

Add to Wish List

The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

Together they make this job simple and easy and ensure a tight fit with a new ring.

Show More Show Less

Bav Auto Crankshaft Front Oil Seal Removal / Installer Tool - N54, N5...

10X Entries Into Our F80 M3 Sweepstakes

T#:580444

Part#: B8800139

Ships on Sep 30, 2026

Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.

Bav Auto Trailing Arm Bushing Tool Set - E82/88 E84 E9X

10X Entries Into Our F80 M3 Sweepstakes

T#:587611

Part#: B8800101

In Stock

Sale - Save 10% $ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.89 USD

Add to Wish List

Remove and install the rear trailing arm bushings and upper and lower rear control arm bushings with one toolset without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90, E91, E92, E93 model cars.

Show More Show Less

Bav Auto Fuel Injector Removal/Installation Tool - N55

For E - Chassis N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580388

Part#: B8800075

In Stock

Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55

10X Entries Into Our F80 M3 Sweepstakes

T#:580414

Part#: B8800107

Ships on Oct 20, 2026

Sale - Save 5% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD

Add to Wish List

Qty

Sale - Save 5%

$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD

Add to Wish List

Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.

Show More Show Less

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Hub Adapter / Hub Puller

10X Entries Into Our F80 M3 Sweepstakes

T#:580427

Part#: B8800120

In Stock

Sale - Save 10% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

For use with B8800122 impact driver to remove stuck CV axle shafts.

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

10X Entries Into Our F80 M3 Sweepstakes

T#:580445

Part#: B8800140

In Stock

Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.

Radiator / Cooling System Pressure Tester- Bavarian Autosport ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580397

Part#: B8800084

In Stock

Sale - Save 15% $ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 124.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 124.94 USD

Add to Wish List

Bav Auto Media Blaster Kit - BMW N20 N54 N55

10X Entries Into Our F80 M3 Sweepstakes

T#:582473

Part#: B1100008

In Stock

Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Qty

Sale - Save 8%

$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.

Show More Show Less

Bav Auto Crankshaft Rear Oil Seal Removal / Installer Tool - N51, N52...

10X Entries Into Our F80 M3 Sweepstakes

T#:580412

Part#: B8800104

In Stock

Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD

Add to Wish List

For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.

Bav Auto Intermediate Lever Valve Spring Compressor - N20/26 N55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580431

Part#: B8800124

Ships on Sep 30, 2026

Sale - Save 15% $ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD

Add to Wish List

For installation and removal of pressure springs on intermediate levers of valve train. Ensures quick, easy and safe handling of these high force springs.

Genuine BMW Release Tool - 813010

T#:204810

Part#: 83302355850

Ships in 3 Business Days

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Genuine BMW Release Tool - 813010 Special BMW tool used to release parking lock.

Bav Auto Timing Tool Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580365

Part#: B8800041

In Stock

Sale - Save 5% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.44 USD

Add to Wish List

Lock your camshafts in place when servicing your timing system to prevent future timing issues.

Genuine BMW Driveshaft Tool - F10, F25

T#:173231

Part#: 83300496959

Ships in 1 Business Day

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Genuine BMW WRENCH

Genuine BMW ICOM Next B Diagnostic Adapter - MOST Connector

T#:397153

Part#: 81312360884

Ships in 3 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

Bav Auto Smoke Machine Intake Adapter Bladder

10X Entries Into Our F80 M3 Sweepstakes

T#:580342

Part#: B8800012

In Stock

Sale - Save 15% $ 89.99

This product was last offered at the strikethrough price on
05-03-2026

$ 76.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 89.99

This product was last offered at the strikethrough price on
05-03-2026

$ 76.49 USD

Add to Wish List

The inflatable intake adapter quickly and easily adapts to all sizes of intake boots, bellows or pipes, as well as exhaust pipes and other vacuum or pressure system tubes. The adapter assures quick and secure connection of your diagnostic smoker (Evaporative Smoke Machine). No more tapered cones slipping out of the boots or pipes. Simply insert the inflatable bladder into the intake boot (or exhaust) and pump the inflation bulb. The bladder will expand to fit round, oval or other odd shaped boots, pipes, bellows, etc. Once inflated, connect your smoker's outlet hose to the second hose on the adapter. The smoke is injected through the tube in the bladder and into the system being tested.

Show More Show Less

Genuine BMW Torque Angle Meter

T#:170181

Part#: 83300490504

Ships in 3 Business Days

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

Genuine BMW Torque Wrench - No. 009120

Genuine BMW Tool Kit - 71111230685

T#:156504

Part#: 71111230685

Ships in 3 Business Days

1% off MSRP $ 203.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 201.99 USD

Add to Wish List

Qty

1% off MSRP

$ 203.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 201.99 USD

Add to Wish List

Genuine BMW TOOL KIT

Bav Auto Brake Disc Run Out and Ball Joint Wear Gauge

10X Entries Into Our F80 M3 Sweepstakes

T#:580425

Part#: B8800118

In Stock

Sale - Save 3% $ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Qty

Sale - Save 3%

$ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Used to measure the wear on brake discs and ball joints.

Bav Auto Exhaust Pipe Expander - 3 Piece Set

10X Entries Into Our F80 M3 Sweepstakes

T#:580376

Part#: B8800055

In Stock

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

3 piece pipe expander set enabling you to adapt your exhaust pipe to fit together with stock or aftermarket pieces alike.

Bav Auto Ratcheting Exhaust Pipe Cutter

10X Entries Into Our F80 M3 Sweepstakes

T#:580374

Part#: B8800053

In Stock

Sale - Save 5% $ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.84 USD

Add to Wish List

Qty

Sale - Save 5%

$ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.84 USD

Add to Wish List

Ratcheting tubing cutter makes cutting exhaust tubing a breeze. Cuts without having to rotate tool completely around tubing.

Genuine BMW Valve Blasting Adapter - 81292208037 - N54

T#:20451

Part#: 81292208037

In Stock

Sale - Save 8% $ 85.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 78.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 8%

$ 85.59

This product was last offered at the strikethrough price on
08-18-2026

$ 78.99 USD

Limited Qty Sale

Add to Wish List

This adapter can be used with the valve blaster tool for the N54 engine to aid in the maintenance of the valves.

Genuine BMW STRAHL-ABSAUGADAPTER

Vargas Head Port Block Off Kit - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778137

Part#: VTT-OCC-1-HEAD-P

Ships in 6 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Engineered for high-performance BMW applications, the Vargas Head Port Block-Off Kit solves the issue of crankcase pressure management in N54 engines.

VTT “Spline Lock” Hub Puller

2X Entries Into Our F80 M3 Sweepstakes

T#:27638813

Part#: CRANK-PULLER-S55

Ships on Sep 17, 2026

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

If you have a Spline lock installed they can be nearly impossible to get out without a proper puller. We designed these just for removing the hubs. When removed yours have your cut splines in the crank, on reassembly simply line the splines back up, and follow factory TQ, and stretch procedures on the new bolt.

Show More Show Less

Genuine BMW Camber Adjustment Tool

T#:171701

Part#: 83300493325

Ships in 3 Business Days

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

Genuine BMW TOOLS

Genuine BMW Release Tool - 83300495397

T#:172606

Part#: 83300495397

Ships in 3 Business Days

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

Genuine BMW RELEASE TOOL

Genuine BMW Pressure Test Adaptor - E60 M5

T#:172974

Part#: 83300496326

Ships in 3 Business Days

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Genuine BMW COVER

ICOM NEXT A OBD CABL

T#:546813

Part#: 81312444994

Ships in 3 Business Days

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Genuine BMW Spindle Housing Spreader Tool

T#:170980

Part#: 83300491930

Ships in 4 Business Days

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

Genuine BMW TOOLS

Genuine BMW Measuring Aid

T#:222736

Part#: 83302413036

Ships in 5 Business Days

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

Essential diagnostic tool for checking chain stretch before it turns into a costly engine failure

Genuine BMW Pliers - 83300495235

T#:172534

Part#: 83300495235

Ships in 3 Business Days

$ 300.99 USD

Add to Wish List

Qty

$ 300.99 USD

Add to Wish List

Genuine BMW PLIERS

Genuine BMW Fuel Injector Seal Installation Tool - BMW B38 B46 B48 B5...

T#:173153

Part#: 83300496668

Ships in 3 Business Days

Sale - Save 10% $ 213.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 213.99

This product was last offered at the strikethrough price on
08-10-2026

$ 191.99 USD

Add to Wish List

Specially designed for installing the PTFE sealing rings on the injector for a tight seal

BMW Flywheel Lock Tool - 83300493587

T#:171786

Part#: 83300493587

Ships in 3 Business Days

$ 213.99 USD

Add to Wish List

Qty

$ 213.99 USD

Add to Wish List

The **BMW Flywheel Lock Tool** is a specialized tool designed to keep the flywheel stationary during engine maintenance or repair. It ensures the flywheel does not move while performing tasks like removing or installing the crankshaft pulley, timing belt, or other components that require the flywheel to stay fixed. ### Key Features: - **Precision Fit:** Specifically designed for BMW engines to ensure proper alignment and tool engagement. - **Secure Locking:** Effectively locks the flywheel in place to prevent unwanted movement during service or maintenance. - **Durability and Strength:** Built to withstand high torque and pressure during engine work, ensuring reliability and long-lasting performance. ### Application: This tool is frequently used during engine repairs, timing adjustments, or clutch and flywheel replacements. It is essential for preventing engine damage when immobilizing the flywheel during critical work. ### Installation/Usage: To use the tool, secure it to the flywheel before starting any maintenance tasks. It’s recommended to consult a BMW technician or professional to ensure proper application of the tool. Would you like further details on its usage or compatibility with specific BMW models?

Show More Show Less

Genuine BMW Reversible Insert Ratchet - 83300496855

T#:531936

Part#: 83300496855

Ships in 3 Business Days

$ 133.99 USD

Add to Wish List

Qty

$ 133.99 USD

Add to Wish List

This Genuine BMW Reversible Insert Ratchet is the exact factory spec tool designed to handle high stakes engine work where normal ratchets simply won't fit. Engineered for quick directional changes and optimized to accept specialty inserts and bits, this tool offers the rigidity and low profile clearance needed to execute complex jobs flawlessly.

Show More Show Less

Genuine BMW Valve Depressor

T#:170496

Part#: 83300491053

Ships in 8 Business Days

$ 143.99 USD

Add to Wish List

Qty

$ 143.99 USD

Add to Wish List

Genuine BMW LEVER

VTT Billet Cylinder Head Lifting Tool (Black) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921506

Part#: VTT-HH-BLK-BOTH

Ships on Sep 17, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

VTT “Spline Lock” Hub Puller

2X Entries Into Our F80 M3 Sweepstakes

T#:27638810

Part#: CRANK-PULLER-N54

Ships on Sep 17, 2026

$ 73.99 USD

Add to Wish List

Qty

$ 73.99 USD

Add to Wish List

If you have a Spline lock installed they can be nearly impossible to get out without a proper puller. We designed these just for removing the hubs. When removed yours have your cut splines in the crank, on reassembly simply line the splines back up, and follow factory TQ, and stretch procedures on the new bolt.

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Red) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921504

Part#: VTT-HH-RED-BOTH

Ships on Sep 17, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Blue) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921479

Part#: VTT-HH-BLUE-BOTH

Ships on Sep 17, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

Vargas "Head Handler" Lifting Tool - Red - Short - BMW B58/N54/N55/S5...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918856

Part#: VTT-HHREDSHRT

Ships on Sep 17, 2026

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT Billet "Head Handler" is the definitive solution for technicians and BMW enthusiasts who frequently perform top-end engine work.

Vargas "Head Handler" Cylinder Head Lifting Tool - Blue - Long - BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918854

Part#: VTT-HHBLULONG

Ships on Sep 17, 2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas Head Handler provides maximum versatility, specifically catering to those who need to remove/install a cylinder head with the camshafts in place.

Vargas "Head Handler" Cylinder Head Lifting Tool - Black - Long - BMW...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918853

Part#: VTT-HHBLKLONG

Ships on Sep 17, 2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas Billet "Head Handler" is the ultimate solution for BMW technicians and enthusiasts who frequently handle heavy cylinder heads.

Vargas "Head Handler" Cylinder Head Lifting Tool - Red - Long - BMW N...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918855

Part#: VTT-HHREDLONG

Ships on Sep 17, 2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Designed for the high-volume BMW specialist, the VTT "Head Handler" eliminates the struggle and risks associated with manually lifting heavy cylinder heads.