BMW Electrical Sensors, Switches, & Relays for BMW 1 Series E82 (2008-2013)

This sensor monitors the position of the Valvetronic eccentric shaft and feeds data back to the ECU. The common issue with this sensor is that it gets contaminated with oil and fails. It doesn't give a fault code or check engine light, however. What you would notice is sluggish driving, hesitation, poor performance, jerky shifts from an automatic, and other drivability issues. These types of issues are typically diagnosed as ignition coils (which are their own issue altogether) but this sensor may also be faulty.

The eccentric shaft sensor is located at the front of the cylinder head and is only accessible with the valve cover off. It's easy to check for oil by removing the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside, or even on the valve cover itself, the sensor is likely contaminated or ready to fail. You can wipe or clean the oil from sitting inside the sensor but it will come back.

If you're planning this job make sure you have our Valve Cover Overhaul Kit, which includes a new seal for the eccentric sensor as well as the rest of the valve cover and Valvetronic gaskets. You can add the valve cover set from the options below.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2011 F25 BMW X3 xDrive28i
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Replacing your factory environmental air catalyst sensor can be quite a headache when it's integrated into the radiator, causing a 2AD8 trouble code. But fear not! URO Parts has a solution with their standalone replacement sensor, making this repair much more manageable and cost-effective.

Key Features:

Guaranteed Fitment: Designed to fit perfectly, ensuring compatibility with your vehicle. Direct OE Replacement: Restores your factory cooling fan sensor's functionality seamlessly. Plug-and-Play Installation: Easy to connect, saving you time and hassle during installation. High-Quality Construction: Crafted from durable materials to withstand the heat of the engine compartment and cooling system. Low Electrical Resistance: Alloy conductors reduce resistance for accurate sensor operation. Reliable and Long-Lasting: Tested for reliability and engineered for a long service life. If you're dealing with a "direct ozone reduction catalyst temperature gradient too low" SES code, upgrading to this high-quality sensor from URO Parts is the solution you need.

URO Battery Hold Down Clamp - BMW E92 335xi

URO Battery Hold Down Clamp - BMW E92 335xi is a premium solution for repairing your damaged or broken factory battery hold down. This new clamp is designed to restore the proper positioning and securement of your vehicle's battery, ensuring it remains firmly in place during operation. Manufactured to meet OE specifications, it guarantees a perfect fit and easy installation. Made from high-quality materials, the URO Battery Hold Down Clamp is engineered to withstand harsh operating conditions, including intense vehicle heat and corrosive battery fumes, providing long-lasting durability and reliability.

Key Benefits:

• Direct-fit OE replacement ensures easy installation and secure battery positioning
• High-quality materials resist heat and corrosive battery fumes for enhanced durability
• Restores battery hold down function, preventing battery movement during operation
• Built to withstand harsh conditions for long-lasting reliability

With the URO Battery Hold Down Clamp - BMW E92 335xi, you can ensure your battery is securely held in place, contributing to the overall reliability and safety of your vehicle.