BMW Brakes & Brake Parts for BMW 1 Series E82 (2008-2013)

Rear Stainless Steel Brake Lines - Non-M E8X/E9X/F2X/F3X

10X Entries Into Our F80 M3 Sweepstakes

T#:582985

Part#: 022756TMS01

In Stock

Sale - Save 5% $ 100.99

This product was last offered at the strikethrough price on
06-14-2026

$ 95.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 100.99

This product was last offered at the strikethrough price on
06-14-2026

$ 95.94 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Front Stainless Steel Brake Lines -E90 E92 E82 E88 E9x E8x ...

10X Entries Into Our F80 M3 Sweepstakes

T#:582981

Part#: 022756TMS05

In Stock

Sale - Save 10% $ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.09 USD

Add to Wish List

Qty

Sale - Save 10%

$ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.09 USD

Add to Wish List

Turner has developed a zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport - Stainless Steel Brake Lines - Complete Kit - E8x ...

10X Entries Into Our F80 M3 Sweepstakes

T#:583485

Part#: 022756TMS10

In Stock

Sale - Save 15% $ 345.99

This product was last offered at the strikethrough price on
06-14-2026

$ 294.07 USD

Add to Wish List

Qty

Sale - Save 15%

$ 345.99

This product was last offered at the strikethrough price on
06-14-2026

$ 294.07 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Front Stainless Steel Brake Lines - E9x M3/ E8x 1M

10X Entries Into Our F80 M3 Sweepstakes

T#:582983

Part#: 022756TMS03

In Stock

Sale - Save 15% $ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Turner has developed a new zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Rear Stainless Steel Brake Lines - E82 1M E90 E92 E9x M3 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:582986

Part#: 022756TMS04

In Stock

Sale - Save 10% $ 107.99

This product was last offered at the strikethrough price on
06-14-2026

$ 97.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 107.99

This product was last offered at the strikethrough price on
06-14-2026

$ 97.19 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Mid Stainless Steel Brake Lines - E8x E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:582984

Part#: 022756TMS02

In Stock

Sale - Save 15% $ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Stainless Steel Brake Lines - Complete Kit - E8x/E9...

10X Entries Into Our F80 M3 Sweepstakes

T#:583484

Part#: 022756TMS09

In Stock

Sale - Save 10% $ 338.99

This product was last offered at the strikethrough price on
06-14-2026

$ 305.07 USD

Add to Wish List

Qty

Sale - Save 10%

$ 338.99

This product was last offered at the strikethrough price on
06-14-2026

$ 305.07 USD

Add to Wish List

Turner has developed a superior zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Performance Parking Brake Actuator/Expanding Lock -...

10X Entries Into Our F80 M3 Sweepstakes

T#:8933505

Part#: 013313LA01KT

Ships on Nov 3, 2026

Sale - Save 25% $ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD

Add to Wish List

Our Performance Parking Brake Actuator improves the ratio of your actuator from 3:1 to 4:1, which provides better clamp load on the parking brake shoes and increases the longevity of your parking brake system! Plus, if you are into drifty things, this will give you a little better control over your parking brake. Not only does our 4130 Chromoly steel zinc-coated parking brake actuator improve the overall parking brake feel, but it also creates less stress on your parking cables. This is the perfect upgrade for your parking brake system whether you are currently replacing components, or just looking to improve the longevity of your existing system.

Show More Show Less

Turner Motorsport Front TrackSport Rotor Set - 360x30mm - E9X M3, E82...

10X Entries Into Our F80 M3 Sweepstakes

T#:600081

Part#: 025518TMS01AKT

Ships on Jan 22, 2027

Sale - Save 3% $ 1,319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,280.39 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,280.39 USD

Add to Wish List

When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #4 - Silver

T#:401440

Part#: IRPHB-4S

In Stock

$ 254.99 USD

Add to Wish List

Qty

$ 254.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #1 - Black

T#:401444

Part#: IRPHB-1B

Special Order: No Guaranteed ETA

$ 246.99 USD

Add to Wish List

Qty

$ 246.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #2 - Black

T#:401443

Part#: IRPHB-2B

In Stock

$ 259.99 USD

Add to Wish List

Qty

$ 259.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake

T#:584206

Part#: IRPHBK1

Ships on Nov 10, 2026

Starting at $ 246.99 USD

Add to Wish List

Starting at $ 246.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #3 - Black

T#:401442

Part#: IRPHB-3B

Special Order: No Guaranteed ETA

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #4 - Black

T#:401441

Part#: IRPHB-4B

Special Order: No Guaranteed ETA

$ 275.99 USD

Add to Wish List

Qty

$ 275.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #5 - Black

T#:401445

Part#: IRPHB-5B

Special Order: No Guaranteed ETA

$ 730.99 USD

Add to Wish List

Qty

$ 730.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #4 - Gold

T#:401446

Part#: IRPHB-4G

Special Order: No Guaranteed ETA

$ 254.99 USD

Add to Wish List

Qty

$ 254.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #5 - Black and Silver ...

T#:401448

Part#: IRPHB-5BS

Special Order: No Guaranteed ETA

$ 695.99 USD

Add to Wish List

Qty

$ 695.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #5 - Black and Gold ...

T#:401447

Part#: IRPHB-5BG

Special Order: No Guaranteed ETA

$ 695.99 USD

Add to Wish List

Qty

$ 695.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Brakes & Brake Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Rear Stainless Steel Brake Lines - Non-M E8X/E9X/F2X/F3X

Turner Front Stainless Steel Brake Lines -E90 E92 E82 E88 E9x E8x ...

Turner Motorsport - Stainless Steel Brake Lines - Complete Kit - E8x ...

Turner Front Stainless Steel Brake Lines - E9x M3/ E8x 1M

Turner Rear Stainless Steel Brake Lines - E82 1M E90 E92 E9x M3 ...

Turner Mid Stainless Steel Brake Lines - E8x E9x

Turner Motorsport Stainless Steel Brake Lines - Complete Kit - E8x/E9...

Turner Motorsport Performance Parking Brake Actuator/Expanding Lock -...

Turner Motorsport Front TrackSport Rotor Set - 360x30mm - E9X M3, E82...

IRP Universal Hydraulic Handbrake Fly-Off #4 - Silver

IRP Universal Hydraulic Handbrake Fly-Off #1 - Black

IRP Universal Hydraulic Handbrake Fly-Off #2 - Black

IRP Universal Hydraulic Handbrake

IRP Universal Hydraulic Handbrake Fly-Off #3 - Black

IRP Universal Hydraulic Handbrake Fly-Off #4 - Black

IRP Universal Hydraulic Handbrake Fly-Off #5 - Black

IRP Universal Hydraulic Handbrake Fly-Off #4 - Gold

IRP Universal Hydraulic Handbrake Fly-Off #5 - Black and Silver ...

IRP Universal Hydraulic Handbrake Fly-Off #5 - Black and Gold ...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results