Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.
The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.
Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.
For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.
Features and advantages:
Transformative
Enhances the rear aesthetic of the 1 Series
Direct fit utilizing factory clip locations and hardware
Available in Textured Matte Black and Gloss Black
Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer
Compatible with both E82 and E88 models equipped with the M-Sport Package
Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.
Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.
Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.
Features:
This item fits the following BMWs:
2004 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Crafted from impact-resistant ABS plastic, Clinched manufactures fender flares akin to OE bumpers, ensuring both durability and lightweight properties. These adaptable fender flares offer universal fitting, suitable for various vehicle makes and models with minimal adjustments. Choose between seamlessly blending them with the car's body or showcasing them with visible rivets and edges.
Installation involves rivets and bolts, requiring drilling and cutting of the original fenders for proper fitting. Utilize a heat gun or hair dryer to heat and mold the flares, allowing them to conform to the factory body lines. Their remarkable pliability distinguishes them from fiberglass flares.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
We design our carbon fiber mirror caps to be a direct OEM replacement. All replacement parts are made with 100% non-recycled raw plastic to ensure that the clips and tabs will not break off easily. Includes one pair of passenger and driver side direct OEM replacement mirror covers.
Install involves removing factory mirror covers and replacing with new carbon fiber mirror caps.
This product fits the following BMWs:
E90 M3
E92 M3
E93 M3
E82 1M
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Turner Motorsport introduces the Carbon Fiber Performance Spoiler for E82 and E88 BMW models. Crafted with elegance and style, this spoiler adds a sleek touch to your vehicle. Constructed from lightweight yet durable carbon fiber, it not only enhances aesthetics but also improves performance. For installation, Turner Motorsport recommends using a body adhesive like Betalink for optimal results.