BMW Drivetrain Parts for BMW 1 Series E82 (2008-2013)

Schwaben offers the right tools to make your next project a success. Everything from complex engine scanners to brake bleeders and spring compressors, Schwaben tools has you covered.

Some of the recommended use include but are not limited to:

• Remove and install rear ball joints on E38, E39, E60/61, E63/64, E65/66, and E70's
• Removal and installation of ball joints and bushings on rear control arms on E36, E46, E39, E60/61, E63/64,  E65/66, E70, E83 and E85/86 Z4's
• Removal and installation of rear sub frame mounted differential bushings on E36, E46, E83 and E85/86 Z4's
• Removal and installation of rear differential mounted bushings on E36, E46, E9X, E60/61, E63/64, E65/66, and E85/86 Z4's

Maintain peak performance and extend the life of your transmission with the Bremmen Parts DCT Transmission Filter. Engineered to block harmful contaminants, this premium filter protects vital components such as solenoids and fluid passages, ensuring smooth and reliable operation.

A clogged or worn transmission filter can restrict fluid flow, leading to delayed shifts, harsh gear engagements, or even severe transmission failure. Replacing the filter during routine fluid service or after major component replacements like the clutch pack, pump, or fluid pan is critical to preserving your transmission’s performance.

Choose Bremmen Parts for a durable, high-quality solution designed specifically for your BMW’s dual-clutch transmission.

The drive shaft support bearing is essential for stabilizing the drive shaft and ensuring smooth, efficient power delivery. Over time, the rubber mount surrounding the bearing can degrade, leading to excessive drive shaft movement and noticeable vibrations.

If you notice a thudding or clunking noise during acceleration, especially coming from beneath the center console, a failed center support bearing is likely the cause. Bremmen Parts provides a reliable and affordable replacement solution, designed to restore your BMW’s performance and driving comfort.

Ensure precise clutch installation with this specialized alignment tool, designed specifically for N54-equipped BMWs. While most aftermarket clutch kits include a generic alignment tool, many are intended for the N55, which is incompatible with the N54 due to differences in pilot bearing mounting and flywheel design.

This tool is engineered for both 6-bolt (01/2009+) and 8-bolt (-01/2009) N54 flywheels, allowing you to accurately center and align the clutch disc on the flywheel during pressure plate installation. Achieve a hassle-free and precise fit with this essential service tool.

Maintain peak performance and extend the life of your transmission with the Bremmen Parts DCT Transmission Filter. Engineered to block harmful contaminants, this premium filter protects vital components such as solenoids and fluid passages, ensuring smooth and reliable operation.

A clogged or worn transmission filter can restrict fluid flow, leading to delayed shifts, harsh gear engagements, or even severe transmission failure. Replacing the filter during routine fluid service or after major component replacements like the clutch pack, pump, or fluid pan is critical to preserving your transmission’s performance.

Choose Bremmen Parts for a durable, high-quality solution designed specifically for your BMW’s dual-clutch transmission.

It only takes a gust of wind to have your hood crashing down on your head, or if you have a carbon fiber hood and no longer have the gas struts than this could be what you need.

 This hood prop is adjustable, lightweight, and sturdy making it easy to keep out of the way in the trunk so it's there whenever you need it. 

• 30% shorter shifts
• Counterbalanced for great shift feel
• Stainless steel & aluminum construction
• Rubber isolated for reduced NVH
• Maintains stock shift feel with uprated stock-type bushings

The Dinan short shifter provides shorter shift throws with a crisper and more precise feel than a stock shifter. Instead of retrofitting a stock BMW lever, with all of its deficiencies, Dinan has engineered this billet aluminum shifting system. Special features engineered into this unit include a two piece fully isolated stick assembly, exclusive integrated and dampened pivot cup with self lubricating pivot ball, counter balanced to reduce effort and exclusive polymer "Iglide" T-500 lower pivot bushings that are impervious to contamination. Featuring an adjustable pivot, which allows this shifter to fit both standard and M Series applications. All of this combined with a simple straightforward installation provides a professional level shifter. Provides a 30% throw reduction in E82 128i/135i, E9X 325i/328i/330i/335i, and E60 530i/545i/550i.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty.

The Pneumatic CV Boot Installer simplifies CV boot installation through air power. Its sturdy metal fingers stretch the boots, enabling effortless slipping over constant velocity joints without the need to remove them from the axle.

This efficient tool reduces the once time-consuming two-hour task to a mere 20-minute job, saving significant labor and effort. Operating it is a breeze?all you need is an air compressor, making it convenient for both professionals and enthusiasts in the automotive industry.

Crucially, it works exclusively with flexible CV boots, and is not compatible with plastic boots. With its user-friendly design, this installer is a game-changer in automotive maintenance, offering a hassle-free solution for CV boot installation.

Plus, our Air Powered CV Boot Installer comes with a LIFETIME REPLACEMENT guarantee, ensuring you never have to worry about spending hours on boot installations again!

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

• Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material