BMW Drivetrain Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:
Rogue Engineering Transmission Mounts - Pair - Multiple BMWs
Rogue Engineering Transmission Mounts - Pair - Multiple BMWs ...
Rogue Engineering - Corporate Logo
T#:641617
Part#: TM
In Stock
$ 69.00 USD
Free Shipping
Add to Wish List
$ 69.00 USD
Free Shipping
Add to Wish List
Unlike other aftermarket mounts, the mounting plate and studs of our mounts have been Zinc-plated to prevent corrosion. Rogue Engineering Transmission Mounts are sold as a pair, and come with Grade 8 Zinc plated hardware. Rogue Engineering transmission mounts are designed with street comfort in mind while still reducing left and right movement of the transmission. By using a cylindrical shape instead of the factory hourglass like design and utilizing Neoprene rubber deflection can be significantly reduced, minimizing unwanted transmission movement while maintaining vibration dampening characteristics.
Show More Show Less
E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum Flywheel
E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...
JB Racing - Corporate Logo
T#:2801
Part#: 520-200-240
In Stock
$ 714.00 USD
Free Shipping
Add to Wish List
$ 714.00 USD
Free Shipping
Add to Wish List
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i
Show More Show Less
Fall-Line Motorsports - Aluminum DCT Hydraulics Cover - Multiple BMW Fitments
Fall-Line Motorsports - Aluminum DCT Hydraulics Cover - Multiple BMW ...
Fall Line - Corporate Logo
T#:5498480
Part#: FLM-DCT-HC
In Stock
$ 899.99

This product was last offered at the strikethrough price on
06-01-2026

$ 845.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
$ 899.99

This product was last offered at the strikethrough price on
06-01-2026

$ 845.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
Like the DCT oil pan, the plastic OEM hydraulics cover is prone to fatiguing from heat cycling; not ideal considering the important parts that reside behind it. And also like it's oil pan sibling, the Fall-Line hydraulics cover uses a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.
Show More Show Less
Fall-Line Motorsports - Ultimate DCT Track Package - Multiple BMW Fitments
Fall-Line Motorsports - Ultimate DCT Track Package - Multiple BMW Fit...
Fall Line - Corporate Logo
T#:5498483
Part#: FLM-DCT-PKG
Back Ordered
$ 1,999.00 USD
Free Shipping
Add to Wish List
$ 1,999.00 USD
Free Shipping
Add to Wish List
The Ultimate DCT Track Package. Period! Fall-Line has designed an incredible 6061-T6 aluminum oil pan and matching hydraulics cover for DCT cars. The plastic OEM parts are prone to failure from heat-cycling and use a brittle gasket that requires replacement over time. The Fall-Line parts use a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.
Show More Show Less
Fall-Line Motorsports - Aluminum DCT Oil Pan - Multiple BMW Fitments
Fall-Line Motorsports - Aluminum DCT Oil Pan - Multiple BMW Fitments ...
Fall Line - Corporate Logo
T#:5498479
Part#: FLM-DCT-PAN
Back Ordered
$ 899.00 USD
Free Shipping
Add to Wish List
$ 899.00 USD
Free Shipping
Add to Wish List
The plastic OEM pan is prone to leaking and uses a brittle gasket that requires replacement over time. The Fall-Line pan uses a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$