BMW Drivetrain Parts for BMW 1 Series E82 (2008-2013)

Revshift Polurethane Transmission Mount Set - 95A (Track - Green) - E...

T#:600155

Part#: PTM-BT

Ships in 1-3 days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

95A Track (Green): Significantly stiffer and stronger than OEM rubber. Noticeable increase in NVH. Excellent for enthusiastically driven street and track cars.

JXB Driveshaft Center Support Bearing Carrier - Street Bushings - BMW...

T#:4744858

Part#: BMW01A0-S

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The stock center support bearing carrier is engineered to minimize noise, vibration, and harshness (NVH) in the cabin by loosely securing the center bearing with a soft rubber bushing. However, this design allows the driveshaft to move off-center during launches and shifts, reducing throttle response and causing drivetrain oscillations. Over time, the rubber bushing can sag or dry rot, leading to misalignment of the driveshaft.

Prevent or fix this common problem with JXB Performance's Driveshaft Center Support Bearing Upgrade! This upgrade features a simple yet highly effective 2-piece design that makes installation and bushing replacement effortless. The stock carrier is cut away, and the JXB bushings securely "clamp" the driveshaft bearing in place, ensuring constant driveshaft alignment.

The Street bushing option from JXB is the most popular choice, offering a significant improvement over the stock design while keeping NVH levels minimal.

Note: Some light NVH, such as a soft hum, may occur at certain speeds. However, with a modified exhaust or open windows, it’s unlikely to be noticeable.

Installation is straightforward and doesn’t require removing the driveshaft. The 2-piece design clamps directly onto the OEM bearing, though removing the old carrier will require a cutting tool.

Need replacement or additional bushings? See T#4799658 for replacement street bushings.

Show More Show Less

Bav Auto Universal Flex Disc - Multiple BMW Applications

10X Entries Into Our F80 M3 Sweepstakes

T#:639802

Part#: 26117511454

In Stock

Sale - Save 15% $ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.49 USD

Add to Wish List

This replacement flex disc (aka: the guibo) is a vibration dampener mounted on the back of the transmission which connects to the driveshaft. When it has worn, it produces a terrible vibration throughout the car. It's especially noticeable at low speeds and when starting from a standstill. Oil leaking from the back of the transmission will significantly reduce its life. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Bav Auto Automatic Transmission Filter Kit - E82/88 128, E9X 328, E83...

For vehicles equipped with automatic transmission GA6L45R

10X Entries Into Our F80 M3 Sweepstakes

T#:639806

Part#: 24117593565

In Stock

Sale - Save 20% $ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 31.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 31.99 USD

Add to Wish List

Remember to service your transmission at the recommended intervals to increase your transmission's life span and reliability! From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E81/82/88...

T#:4744864

Part#: BMW01A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.

Show More Show Less

Revshift Polurethane Transmission Mount Set - 80A (Street - Black) - ...

T#:47885235

Part#: PTM-BT-80A

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

80A Street (Black) Bushings: Stiffer and stronger than OEM rubber. Minimal increase in NVH. Great choice as an upgrade over stock mounts (OEM+).

RevShift Differential Bushing Set - BMW E9X / E8X - 80A Street ...

For Non-M Models Only

T#:39363088

Part#: DBS-E9X80A-REV

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Differential Bushing Set - BMW E9X / E8X (Non-M) Enhance your driveline performance with this premium differential bushing set, designed specifically for E9X and E8X Non-M models. Factory rubber bushings degrade over time, leading to excessive drivetrain movement, clunking, and inefficient power transfer. These high-quality replacement bushings provide firm, reliable differential support, minimizing deflection for sharper throttle response and improved drivetrain stability. Whether you're replacing worn-out components or upgrading for spirited driving, this set delivers a more connected and controlled feel on the road. Precision-engineered for a direct OE-style fit, these bushings install seamlessly without modifications. Restore crisp, precise performance to your BMW today! ✅ Direct-fit replacement for aging factory bushings ✅ Reduces drivetrain flex and enhances power delivery ✅ Perfect for daily drivers and performance applications 📦 Includes: Full set of differential bushings for a complete refresh.

Show More Show Less

Driveshaft Carrier Spare Bushing Set - Track

Spare bushings only - does not include new carrier assembly

T#:4799659

Part#: BSH04A1

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.

Driveshaft Carrier Spare Bushing Set - Street

Spare bushings only - does not include new carrier assembly

T#:4799658

Part#: BSH04A0

Ships in 4 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

T#:2801

Part#: 520-200-240

In Stock

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i

Show More Show Less

Fall-Line Motorsports - Aluminum DCT Hydraulics Cover - Multiple BMW ...

T#:5498480

Part#: FLM-DCT-HC

In Stock

$ 899.99

This product was last offered at the strikethrough price on
06-01-2026

$ 845.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 899.99

This product was last offered at the strikethrough price on
06-01-2026

$ 845.99 USD

Limited Qty Sale

Add to Wish List

Like the DCT oil pan, the plastic OEM hydraulics cover is prone to fatiguing from heat cycling; not ideal considering the important parts that reside behind it. And also like it's oil pan sibling, the Fall-Line hydraulics cover uses a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.

Show More Show Less

Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X...

T#:640069

Part#: MS-006-076

Special Order: No Guaranteed ETA

$ 1,299.99 USD

Add to Wish List

Qty

$ 1,299.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and a longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Organic Discs Steel Single Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

Fall-Line Motorsports - Ultimate DCT Track Package - Multiple BMW Fit...

T#:5498483

Part#: FLM-DCT-PKG

Back Ordered

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The Ultimate DCT Track Package. Period! Fall-Line has designed an incredible 6061-T6 aluminum oil pan and matching hydraulics cover for DCT cars. The plastic OEM parts are prone to failure from heat-cycling and use a brittle gasket that requires replacement over time. The Fall-Line parts use a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.

Show More Show Less

Fall-Line Motorsports - Aluminum DCT Oil Pan - Multiple BMW Fitments ...

T#:5498479

Part#: FLM-DCT-PAN

Back Ordered

$ 899.00 USD

Add to Wish List

Qty

$ 899.00 USD

Add to Wish List

The plastic OEM pan is prone to leaking and uses a brittle gasket that requires replacement over time. The Fall-Line pan uses a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.

Show More Show Less

M18 Automatic Transmission Fill Plug - BMW

10X Entries Into Our F80 M3 Sweepstakes

T#:22690760

Part#: 24117552349

In Stock

Sale - Save 11% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.99 USD

Add to Wish List

Qty

Sale - Save 11%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.99 USD

Add to Wish List

Fits various BMW Transmissions. Includes rubber sealing washer/o-ring.

DKM MSC Segmented Ceramic Twin-Disc Clutch Kit W/ Flywheel - 240mm - ...

T#:5987856

Part#: MSC-006-076

Special Order: No Guaranteed ETA

$ 1,699.99 USD

Add to Wish List

Qty

$ 1,699.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MSC Twin Ceramic Disc Clutch Kit is designed to hold 100% to 200% torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 240mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for 100-200% increased torque over stock **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Drivetrain Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Revshift Polurethane Transmission Mount Set - 95A (Track - Green) - E...

JXB Driveshaft Center Support Bearing Carrier - Street Bushings - BMW...

Bav Auto Universal Flex Disc - Multiple BMW Applications

Bav Auto Automatic Transmission Filter Kit - E82/88 128, E9X 328, E83...

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E81/82/88...

Revshift Polurethane Transmission Mount Set - 80A (Street - Black) - ...

RevShift Differential Bushing Set - BMW E9X / E8X - 80A Street ...

Driveshaft Carrier Spare Bushing Set - Track

Driveshaft Carrier Spare Bushing Set - Street

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

Fall-Line Motorsports - Aluminum DCT Hydraulics Cover - Multiple BMW ...

Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X...

Fall-Line Motorsports - Ultimate DCT Track Package - Multiple BMW Fit...

Fall-Line Motorsports - Aluminum DCT Oil Pan - Multiple BMW Fitments ...

M18 Automatic Transmission Fill Plug - BMW

DKM MSC Segmented Ceramic Twin-Disc Clutch Kit W/ Flywheel - 240mm - ...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results