BMW Drivetrain Parts for BMW 1 Series E82 (2008-2013)

Turner Motorsport Lightweight N55 Flywheel & Upgraded Clutch Kit

Unlock the full potential of your N55-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.

Why Choose This Kit?
This setup features the Turner Lightweight N55 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.

The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.

Kit Contents:

Turner Lightweight N55 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:

Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:

Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.

This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.

Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.

Collapsing and worn engine mounts can mean big trouble for N52/N54/N55 cars. The stock mounts are filled with fluid that can leak or evaporate over time. That leaves the mount unstable and too flexible to properly support the engine. The side effects of a worn engine mount are: shaking and vibrating engine, driveline twist from engine torque that can break or snap bushings, and broken motor mount arms and bolts. If you're tired of replacing engine mounts you'll be very pleased wtih these solid rubber versions.

Not only are these more reliable than stock fluid-filled mounts, they are slightly stiffer than new stock mounts thanks to a solid rubber construction (no voids in the rubber) but designed for street use so they remain quiet and comfortable. The solid rubber has less deflection than a stock mount, so no wasted enginemotion. Less wasted motion gives you more torque to the wheels (it's not spent twisting the engine) and better engine response.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Replacement flex disc (guibo). 135mm diameter. 12mm bolt. Application and transmission specific! See below.

Applications:
2008+ E82 BMW 128i
5/1986-1991 E30 BMW 325e 325es M3 - Manual Transmission 
1987-1991 E30 BMW 325ix - Between Transmission & Transfer Case
1996-1998 E36 BMW 328i 328is 328ic - Manual Transmission only 
1999-2005 E46 BMW 323i 323ci 325i 325ci - Automatic & SMG Transmissions only 
1999-2005 E46 BMW 328i 328ci 330i 330ci - Manual, Auto, and SMG
2006+ E90 BMW 325i 328i 330i - Manual or Automatic Transmission 
2006+ E91 BMW 328i - Manual or Automatic Transmission 
2007+ E92 BMW 328i - Manual or Automatic Transmission 
2007+ E93 BMW 328 - Manual or Automatic Transmission 
1982-1983 E28 BMW 528e - Manual Transmission
5/1986-1988 E28 BMW 528e - Manual Transmission
1982-1988 E28 BMW 533i 535i 535is M5 - Manual Transmission 
1991-1995 E34 BMW 525i - Automatic Transmission
1989-6/1992 E34 BMW 525i - Manual Transmission
1993-1995 E34 BMW 530i - Manual or Automatic Transmission
1989-1993 E34 BMW 535i - Manual Transmission
2001-2003 E39 BMW 525i - Automatic Transmission
1997-2003 E39 BMW 528i 530i - Manual or Automatic Transmission 
1980-1989 E24 BMW 633csi 635csi M6 - Manual Transmission
2000-2006 E53 BMW X5 3.0i - for Rear Driveshaft
2000-2003 E53 BMW X5 4.4i X5 4.6is - for Rear Driveshaft
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive48i - for Rear Driveshaft 
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i - Automatic Transmission 
1997-2002 Z3 BMW Z3 2.8 Z3 3.0i - Manual or Automatic Transmission 
2003-2008 Z4 BMW Z4 2.5i - Automatic or SMG Transmission
2003-2008 Z4 BMW Z4 3.0i Z4 3.0si 

Turner Motorsport Dual Shear Selector Rod (DSSR)

Enhance your N54-equipped 135i or 335i’s driving feel with the Turner Motorsport DSSR. Designed to give your shifter a much more precise and solid connection, this DSSR replaces the OEM selector rod, eliminating the play and deflection that come from single-shear designs. Pair it with a Turner short-shift kit for the ultimate shifting upgrade.

Think of the DSSR as a major upgrade from the single-contact OEM rod, much like riding a bike with two hands instead of one: you have stronger, more precise control over each gear change. With its dual-contact setup, the DSSR “sandwiches” both sides of the shifter and transmission, creating a direct link that feels solid, eliminating the vague and sloppy feel of the factory setup.

Key Benefits:

Enhanced Precision: Significantly reduces deflection and play, giving you a more connected feel while shifting Compatible with Factory & Aftermarket Shifters: Perfect for custom setups as well as stock configurations Durable Build: Fabricated from high-quality 303 stainless steel, offering rust resistance and longevity Complete Hardware Included: Comes with zinc-plated hardware for a secure installation Specifications:

Material: 303 stainless steel construction Compatibility: Replacement for part #25117524722 (E8X/E9X N54 models) Installation Design: Two-piece assembly with captive pins, designed for simple alignment and adjustability Fitment: Specially engineered to fit the tight N54 carrier without interference Installation Tips:

Remove your factory selector rod and take note of its orientation. Attach the DSSR to both the transmission selector joint and lower shift lever. Shift to 3rd or 5th gear for maximum access to the supplied hardware, then secure tightly.

Turner Motorsport Polyurethane Shifter Arm Bushing

Want more responsive and accurate shifts without sacrificing comfort? The Turner Motorsport Polyurethane Shifter Arm Bushing is the perfect enhancement to reduce unwanted movement and play in the shift arm assembly. Factory rubber bushings absorb vibrations for smoothness but compromise direct feedback and often wear out, leading to sloppy, imprecise shifting.

Crafted from high-performance polyurethane with a corrosion-resistant 304 stainless steel sleeve, this bushing maintains stability without stretching or wearing out like rubber. Experience the tactile feel of more precise shifts, with minimal NVH (Noise, Vibration, and Harshness) added to your drive. A must-have for any driver looking to take control of their BMW's performance.

Key Features:

Precision Control: Firmer than factory rubber for a crisp, responsive shifter feel Long-Lasting Materials: Made with durable 70a polyurethane and a 304 stainless steel mounting sleeve Easy Installation: Direct replacement—no modifications needed OEM Compatibility: Replaces BMW part numbers 25111222015 and 25111222652 Specifications:

Material: High-quality 70a polyurethane and 304 stainless steel Made in the USA: Proudly manufactured with quality materials Durability: Improved lifespan over factory rubber bushings, reducing slop and enhancing gear engagement

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.