High Performance BMW Wheel Upgrades for BMW 1 Series E82 (2008-2013)

18" APEX VS-5RS Square Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20518645

Part#: VS5RS189528

Ships in 5 Business Days

Starting at $ 2,956.00 USD

Add to Wish List

Starting at $ 2,956.00 USD

Add to Wish List

18x9.5 ET28 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX SM-10RE Square Wheel Set - Satin Black

2X Entries Into Our F80 M3 Sweepstakes

T#:40478172

Part#: 10RE199522SBKT

Ships in 6 Business Days

$ 3,436.00 USD

Add to Wish List

Qty

$ 3,436.00 USD

Add to Wish List

Apex SM-10RE 19x9.5" ET22 Square Wheel Set The SM-10RE is the forged Enduro version of our popular SM-10 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Upgrade the appearance and reduce the weight of your BMW with Apex's SM-10RE wheels! Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Retaining the same ten-spoke layout seen on the Flow Formed SM-10 and ultra light Forged SM-10RS, the all-new Forged SM-10RE gets dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a fully redesigned and reinforced outer lip. All said and done, the SM-10RE is rated at an impressive 2100 lb max load, a five-hundred pound increase over the lightweight SM-10RS. These fortifying measures have been countered with a number of unique weight-saving features as well. Just like the Sprint Line Forged Wheels, the Enduro Line SM-10RE sports deep spoke scalloping intended to machine away excess material without decreasing strength or stiffness. Going a step further, the SM-10RE does away with the center cap support, the outer barrel remains unpainted, showcasing a beautiful raw aluminum, and outer lip pocketing is present between the spokes (an Apex first!). All together, these weight-saving features result in a wheel that is shockingly light considering its impressive stiffness and load rating. The SM-10RE is significantly stronger and stiffer compared to both its Sprint Line and Flow Formed counterparts, and even more so than most competitors. The intention is for the Enduro SM-10RE to become the new de facto wheel of choice for track day enthusiasts and racers looking for a ten-spoke wheel design. For racers, track day goers and car enthusiasts in general who won’t put up with overly light wheels that bend at the sight of steep curbing, the SM-10RE is the answer!

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788361

Part#: ML10189522120KT

Ships in 6 Business Days

$ 2,936.00 USD

Add to Wish List

Qty

$ 2,936.00 USD

Add to Wish List

19" APEX ARC-8 Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20287702

Part#: ARC81995105D

Ships on Nov 5, 2026

Starting at $ 1,814.00 USD

Add to Wish List

Starting at $ 1,814.00 USD

Add to Wish List

APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence! Shed weight and add style with APEX wheels! 19x9.5" ET22/19x10.5" ET22.

Show More Show Less

APEX ARC-8 19x9.5" ET33 Satin Black Wheel 20.5lbs

2X Entries Into Our F80 M3 Sweepstakes

T#:201383

Part#: ARC81995ET33SMBK

Ships in 6 Business Days

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

19x9.5" ET33 APEX ARC-8 Wheel 20.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	20.5
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18" Staggered Wheel Set - Hyper Black

2X Entries Into Our F80 M3 Sweepstakes

T#:387372

Part#: ARC81895M105LHKT

Ships on Oct 15, 2026

$ 1,608.00 USD

Add to Wish List

Qty

$ 1,608.00 USD

Add to Wish List

Specifications: Color - Hyper Black Size Front - 18x9.5" ET35 Size Rear - 18x10.5" ET27

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788321

Part#: ML1018952120AKT1

Ships in 6 Business Days

$ 2,996.00 USD

Add to Wish List

Qty

$ 2,996.00 USD

Add to Wish List

19" APEX SM-10 Staggered Wheel Set - Satin Black

2X Entries Into Our F80 M3 Sweepstakes

T#:600439

Part#: SM101995SBKT1

Ships in 6 Business Days

$ 2,006.00 USD

Add to Wish List

Qty

$ 2,006.00 USD

Add to Wish List

APEX SM-10 19" Staggered Wheel Set -- 19x9.5" / 19x10.5" This set of 9.5" and 10.5" SM-10 wheels is an easy staggered fitment for the E46 M3, E6X M5/6 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use a 9.5" ET22 on the front and a 10.5" ET22 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10 lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" APEX SM-10 Square Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19825262

Part#: SM1019930

Ships in 5 Business Days

Starting at $ 1,936.00 USD

Add to Wish List

Starting at $ 1,936.00 USD

Add to Wish List

Apex ARC8 19x9" ET28 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" APEX SM-10 Square Wheel Set - Satin Black

2X Entries Into Our F80 M3 Sweepstakes

T#:558576

Part#: SM1019105SBKT

Ships in 6 Business Days

$ 2,036.00 USD

Add to Wish List

Qty

$ 2,036.00 USD

Add to Wish List

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

Enhanced strength and lightweight performance
Innovative Flow-formed semi-forging process
Average weight reduction of 10lbs or more
Ample room for brake systems
Classic motorsports design matches BMW's aggressive style

Show More Show Less

APEX Forged EC-7R 18x10 ET33 Square Wheel Set - Anthracite

2X Entries Into Our F80 M3 Sweepstakes

T#:590566

Part#: EC7R181033AKT

Ships in 6 Business Days

$ 2,764.00 USD

Add to Wish List

Qty

$ 2,764.00 USD

Add to Wish List

APEX took extreme care in designing these Forged EC-7R wheels. A proprietary forging process ensures proper uniformity, consistency, and quality of the metal which leads to an extremly strong and reliable wheel. Redesigned barrel profiles allow theses wheels to clear 380mm big brakes without having to size up unnecessarily.

Show More Show Less

18" APEX VS-5RE Staggered Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40478185

Part#: VS5RE181011

Ships in 5 Business Days

Starting at $ 3,036.00 USD

Add to Wish List

Starting at $ 3,036.00 USD

Add to Wish List

Apex VS-5RE 18x10" ET25 & 18x11" ET25 Staggered Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

Apex ARC8R 18" Square Wheel Set - Brushed Clear

2X Entries Into Our F80 M3 Sweepstakes

T#:19924390

Part#: ARC8R189528QANKT

Back Ordered

$ 2,480.00 USD

Add to Wish List

Qty

$ 2,480.00 USD

Add to Wish List

18x9.5 ET28 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

APEX ARC-8 19" Square Wheel Set - Anthracite

2X Entries Into Our F80 M3 Sweepstakes

T#:599193

Part#: ARC81910522ANKT

Ships in 6 Business Days

$ 1,876.00 USD

Add to Wish List

Qty

$ 1,876.00 USD

Add to Wish List

Specifications: Color - Anthracite Size - 19x10.5" ET22

APEX ARC-8 18x9.5/10.5" Staggered 18" Wheel Set - Hyper Black ...

2X Entries Into Our F80 M3 Sweepstakes

T#:387410

Part#: ARC81895105HB

Ships in 6 Business Days

$ 1,608.00 USD

Add to Wish List

Qty

$ 1,608.00 USD

Add to Wish List

Specifications: Color - Hyper Black Size Front - 18x9.5" ET22 Size Rear - 18x10.5" ET27 Will not fit vehicles with M Carbon Ceramic brakes.

APEX Forged EC-7R 18x9.5 ET22/ 18x9.5 ET22 Staggered Wheel Set - Poli...

2X Entries Into Our F80 M3 Sweepstakes

T#:590558

Part#: EC7R1895105PKT

Ships in 6 Business Days

$ 2,934.00 USD

Add to Wish List

Qty

$ 2,934.00 USD

Add to Wish List

APEX took extreme care in designing these Forged EC-7R wheels. A proprietary forging process ensures proper uniformity, consistency, and quality of the metal which leads to an extremly strong and reliable wheel. Redesigned barrel profiles allow theses wheels to clear 380mm big brakes without having to size up unnecessarily.

Show More Show Less

19" BBS LM Wheels - Staggered Set Of Four

T#:26238514

Part#: LM403DSPKKT1

Ships in 3 Business Days

$ 6,949.00 USD

Add to Wish List

Qty

$ 6,949.00 USD

Add to Wish List

19" APEX ARC-8RT Square Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40478125

Part#: ARC8RT199522

Ships in 5 Business Days

Starting at $ 3,276.00 USD

Add to Wish List

Starting at $ 3,276.00 USD

Add to Wish List

Apex ARC-8RT 19x9.5" ET22 Square Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.

Show More Show Less

17" BBS SX Wheels - Set Of Four

T#:26471684

Part#: SX0402CBKT

Ships in 3 Business Days

$ 1,480.00 USD

Add to Wish List

Qty

$ 1,480.00 USD

Add to Wish List

Elevate your BMW's aesthetics and performance with BBS SX wheels, a premium option revered for its sophisticated design and high-performance attributes. The SX wheels boast a timeless multi-spoke design, seamlessly blending style with functionality. Crafted through advanced manufacturing processes and top-quality materials like forged aluminum alloy, these wheels offer lightweight durability, enhancing both vehicle aesthetics and handling characteristics. Embraced by automotive enthusiasts, the SX series is favored for its ability to enhance the appearance and performance of cars. With their elegant aesthetics and precision engineering, BBS SX wheels emerge as the preferred choice for drivers prioritizing both style and performance in their wheel selection.

Sophisticated design enhances vehicle aesthetics
Lightweight build improves handling and fuel efficiency
Exceptional durability ensures long-lasting reliability
Timeless multi-spoke design adds a touch of elegance

Specs:

Size: 17"x7.5"
Offset: 37mm
Center Bore: 72.5mm
Bolt Pattern: 5x120
Color: Crystal Black

Show More Show Less

18" SM-10 APEX Square Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19395613

Part#: SM1RS189522SQ

Back Ordered

Starting at $ 2,876.00 USD

Add to Wish List

Starting at $ 2,876.00 USD

Add to Wish List

Apex SM-10 18x9.5" ET22 Wheel Set Apex 9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" APEX SM-10RE Staggered Wheel Set - Satin Black

2X Entries Into Our F80 M3 Sweepstakes

T#:40478174

Part#: 10RE199510SBKT

Ships in 6 Business Days

$ 3,456.00 USD

Add to Wish List

Qty

$ 3,456.00 USD

Add to Wish List

Apex SM-10RE 19x9.5" ET22 & 19x10" ET25 Staggered Wheel Set The SM-10RE is the forged Enduro version of our popular SM-10 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Upgrade the appearance and reduce the weight of your BMW with Apex's SM-10RE wheels! Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Retaining the same ten-spoke layout seen on the Flow Formed SM-10 and ultra light Forged SM-10RS, the all-new Forged SM-10RE gets dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a fully redesigned and reinforced outer lip. All said and done, the SM-10RE is rated at an impressive 2100 lb max load, a five-hundred pound increase over the lightweight SM-10RS. These fortifying measures have been countered with a number of unique weight-saving features as well. Just like the Sprint Line Forged Wheels, the Enduro Line SM-10RE sports deep spoke scalloping intended to machine away excess material without decreasing strength or stiffness. Going a step further, the SM-10RE does away with the center cap support, the outer barrel remains unpainted, showcasing a beautiful raw aluminum, and outer lip pocketing is present between the spokes (an Apex first!). All together, these weight-saving features result in a wheel that is shockingly light considering its impressive stiffness and load rating. The SM-10RE is significantly stronger and stiffer compared to both its Sprint Line and Flow Formed counterparts, and even more so than most competitors. The intention is for the Enduro SM-10RE to become the new de facto wheel of choice for track day enthusiasts and racers looking for a ten-spoke wheel design. For racers, track day goers and car enthusiasts in general who won’t put up with overly light wheels that bend at the sight of steep curbing, the SM-10RE is the answer!

Show More Show Less

APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs

2X Entries Into Our F80 M3 Sweepstakes

T#:201364

Part#: EC71995ET22AN

Ships in 6 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Forged EC-7R 18x9.5 ET22/18x10.5 ET22 Staggered Wheel Set - Sati...

2X Entries Into Our F80 M3 Sweepstakes

T#:590570

Part#: EC7R1895105SBKT

Ships in 6 Business Days

$ 2,766.00 USD

Add to Wish List

Qty

$ 2,766.00 USD

Add to Wish List

APEX took extreme care in designing these Forged EC-7R wheels. A proprietary forging process ensures proper uniformity, consistency, and quality of the metal which leads to an extremly strong and reliable wheel. Redesigned barrel profiles allow theses wheels to clear 380mm big brakes without having to size up unnecessarily.

Show More Show Less

19" APEX ARC-8RT Staggered Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40478148

Part#: ARC8RT19910

Back Ordered

Starting at $ 3,276.00 USD

Add to Wish List

Starting at $ 3,276.00 USD

Add to Wish List

Apex ARC-8RT 19x9" ET30 & 19x10" ET25 Staggered Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788314

Part#: ML1018930120AKT1

Ships in 6 Business Days

$ 2,956.00 USD

Add to Wish List

Qty

$ 2,956.00 USD

Add to Wish List

18x9" ET30 Brushed Clear APEX SM-10RS Forged BMW Wheel

2X Entries Into Our F80 M3 Sweepstakes

T#:18899171

Part#: SM10RS189ET30BC

Special Order: No Guaranteed ETA

$ 749.00 USD

Add to Wish List

Qty

$ 749.00 USD

Add to Wish List

18" APEX VS-5RS Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20287707

Part#: VS5RS1995105D

Ships in 5 Business Days

Starting at $ 2,996.00 USD

Add to Wish List

Starting at $ 2,996.00 USD

Add to Wish List

The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track!

Show More Show Less

APEX SM-10 19x10" ET25 Square Wheel Set *$200 off & Free Shipping on ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558599

Part#: SM1019X10

Ships in 5 Business Days

Starting at $ 2,016.00 USD

Add to Wish List

Starting at $ 2,016.00 USD

Add to Wish List

The new SM-10 APEX design uses both Flow Forming construction, making the wheel from one solid piece, and a new "I" beam machining technique. This wheel a is break from the traditional mesh styles available from APEX. This new "I" beam machining process mills out a slight amount of material in the spokes to both reduce weight and add visual appeal with a feature normally only found on some of the most expensive race wheels.

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" BBS RI-A Wheels - Set Of Four

T#:26071895

Part#: RIA046DSKT

Ships in 3 Business Days

$ 4,769.00 USD

Add to Wish List

Qty

$ 4,769.00 USD

Add to Wish List

18" BBS RI-A Wheels - Set Of Four

T#:26005181

Part#: RIA008BBKT1

Ships in 3 Business Days

$ 4,609.00 USD

Add to Wish List

Qty

$ 4,609.00 USD

Add to Wish List

18" BBS XR Wheels - Set Of Four

T#:26038576

Part#: XR0107PGKT

Ships on Oct 14, 2026

$ 1,789.00

This product was last offered at the strikethrough price on
06-22-2026

$ 1,725.00 USD

Add to Wish List

Qty

$ 1,725.00 USD

Add to Wish List

19" BBS LM Wheels - Staggered Set Of Four

T#:26404929

Part#: LM411DBPKKT2

Ships on Oct 14, 2026

$ 6,779.00 USD

Add to Wish List

Qty

$ 6,779.00 USD

Add to Wish List

19" BBS LM Wheels - Staggered Set Of Four

T#:26238512

Part#: LM403GPKKT1

Ships in 3 Business Days

$ 6,949.00 USD

Add to Wish List

Qty

$ 6,949.00 USD

Add to Wish List

19" BBS CC-R Wheels - Staggered Set Of Four

T#:26204992

Part#: CC2002GRPKKT

Ships in 3 Business Days

$ 3,666.99 USD

Add to Wish List

Qty

$ 3,666.99 USD

Add to Wish List

Vorsteiner 19" V-FF 101 Staggered Set Of Four - Carbon Graphite - E82...

T#:567491

Part#: VFF101E8XE9XKT

Ships on Dec 2, 2026

$ 2,200.00 USD

Add to Wish List

Qty

$ 2,200.00 USD

Add to Wish List

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

Show More Show Less

18" BBS XR Wheels - Set Of Four

T#:26038574

Part#: XR0107BGKT

Ships on Oct 14, 2026

$ 1,789.00

This product was last offered at the strikethrough price on
07-02-2026

$ 1,725.00 USD

Add to Wish List

Qty

$ 1,725.00 USD

Add to Wish List

19" BBS CI-R Wheels - Staggered Set Of Four

T#:26305059

Part#: CIBPO19SKT2

Ships in 3 Business Days

$ 3,484.99 USD

Add to Wish List

Qty

$ 3,484.99 USD

Add to Wish List

18" BBS SX Wheels - Set Of Four

T#:26038571

Part#: SX0106PPKKT

Ships in 3 Business Days

$ 2,029.00 USD

Add to Wish List

Qty

$ 2,029.00 USD

Add to Wish List

19" APEX SM-10 staggered Wheel Set - Satin Black

2X Entries Into Our F80 M3 Sweepstakes

T#:600440

Part#: SM101910SBKT1

Ships in 6 Business Days

$ 2,026.00 USD

Add to Wish List

Qty

$ 2,026.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:26071925

Part#: RIA028MGRKT2

Ships in 3 Business Days

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

19" BBS CC-R Wheels - Staggered Set Of Four

T#:26204991

Part#: CC2002BPOKT

Ships in 3 Business Days

$ 3,408.99 USD

Add to Wish List

Qty

$ 3,408.99 USD

Add to Wish List

18" BBS RI-A Wheels - Set Of Four

T#:26071897

Part#: RIA046MGRKT1

Ships in 3 Business Days

$ 4,769.00 USD

Add to Wish List

Qty

$ 4,769.00 USD

Add to Wish List

18" BBS RI-A Wheels - Set Of Four

T#:26071893

Part#: RIA046BBKT

Ships in 3 Business Days

$ 4,769.00 USD

Add to Wish List

Qty

$ 4,769.00 USD

Add to Wish List

BBS 19" Style LM-R Wheels - Diamond Silver - Staggered Set Of Four - ...

T#:4154554

Part#: LMRDSPK19SKT2

Ships in 3 Business Days

$ 7,759.00 USD

Add to Wish List

Qty

$ 7,759.00 USD

Add to Wish List

The BBS LM-R is a Multi-Piece Alloy wheel that will give your vehicle the look and performance you've been searching for. These stunning 7 spoke wheels will definitely transform your ride into something truly special! The design of these wheels will be the perfect complement to your BMW. Starting from a billet of 6,000 series aluminum, or a special magnesium alloy, every BBS forged wheel uses a special multi-stage Die-Forging process which can require up to 18 million pounds of pressure to produce. Every stage of production is optimized to help create the best-forged wheel in the industry. BBS forged wheels are not only light, they have been designed to optimize the stiffness to weight ratio while providing the safety and long-term durability expected from BBS. Features & Specifications: Front: 19x9.5" ET25 5x120 Rear: 19x10" ET20 5x120 PFS Ring Kit: 72.56mm 2-Piece Die Forged Aluminum Wheel Titanium Fasteners BBS Patented Milling inside of open spoke area Weight optimized by FEM analysis

Show More Show Less

APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs

2X Entries Into Our F80 M3 Sweepstakes

T#:201357

Part#: EC71995ET43RS

Ships in 6 Business Days

$ 426.00 USD

Add to Wish List

Qty

$ 426.00 USD

Add to Wish List

19x9.5" ET43 APEX EC-7 Wheel 23lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	43
Weight (lbs):	23
Profile:	2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

18" BBS RI-A Wheels - Staggered Set of Four

T#:26005205

Part#: RIA008BBKT2

Ships in 3 Business Days

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18x9.5" ET22 Satin Bronze APEX ARC-8 BMW Wheel

2X Entries Into Our F80 M3 Sweepstakes

T#:18700354

Part#: ARC81895ET22SBZ

Ships in 6 Business Days

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

18" BBS RI-A Wheels - Staggered Set of Four

T#:25971927

Part#: RIA046MGRKT

Ships in 3 Business Days

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

18" BBS RI-A Wheels - Set Of Four

T#:26071867

Part#: RIA045BBKT

Ships in 3 Business Days

$ 4,689.00 USD

Add to Wish List

Qty

$ 4,689.00 USD

Add to Wish List

BMW E82 E9X F8X 18" BBS RI-A Wheels - Set Of Four

T#:26005184

Part#: RIA008MBZKT

Ships in 3 Business Days

$ 4,609.00 USD

Add to Wish List

Qty

$ 4,609.00 USD

Add to Wish List

BMW E82 E9X F8X 18" BBS RI-A Wheels - Set Of Four are the epitome of performance and prestige for your BMW. BBS wheels are synonymous with quality and status, offering unparalleled engineering and design. These one-piece die forged aluminum wheels feature BBS's patented milling process and are optimized for weight through FEM analysis. With a legacy of over 50 years and more than 250 championships across various motorsport categories, BBS ensures exceptional performance and durability, making them a top choice for discerning BMW enthusiasts.

One-piece die forged aluminum construction
Patented milling process for weight optimization
Engineered for high performance and durability
Matte Bronze finish for a distinctive appearance
Perfect fitment with 18"x9.5" size, ET23 offset, 5x120 bolt pattern
Trusted by BMW and other leading automotive manufacturers

Show More Show Less

Project Cars

SELECT YOUR BMW

High Performance BMW Wheel Upgrades for BMW 1 Series E82 (2008-2013)

Sub-Categories

Specs:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results