Packaged by Turner BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:15644328
Part#: 111375351060KT
In Stock
$ 201.51 USD
Free Shipping on orders $49 and up
A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years. This kit also includes the hardware for the oil pan that is a one time use item.
N54 Crank Hub Service Kit - From 02/2011
For vehicles with production date from 02/2011
Packaged by Turner - Corporate Logo
T#:2227020
Part#: N54POCRANKT
In Stock
Sale - Save 3% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD
Free Shipping
Sale - Save 3%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD
Free Shipping
All of the components necessary for service when upgrading to an aftermarket crank hub solution.
Packaged by Turner - Corporate Logo
T#:36032371
Part#: N54-WPC-RBKT2
In Stock
Sale - Save 6% $ 810.99

This product was last offered at the strikethrough price on
05-03-2026

$ 760.08 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 810.99

This product was last offered at the strikethrough price on
05-03-2026

$ 760.08 USD
Free Shipping on orders $49 and up

This kit includes everything needed to replace your rod bearings.

Kit includes

Upper and lower WPC-treated connecting rod bearings Hardware Oil filter Molygen New Generation Engine Oil (5w-40) - 7 Liters Oil pan gasket RedLine assembly lube

Show More Show Less

Packaged by Turner - Corporate Logo
T#:15710826
Part#: CR222SV0KT
In Stock
$ 521.23 USD
Free Shipping on orders $49 and up
This kit includes every thing needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube
Show More Show Less

Packaged by Turner - Corporate Logo
T#:56363350
Part#: 11747626351KT2
Ships in 2 Business Days
New Item
$ 259.99 USD
Free Shipping on orders $49 and up
Built around OEM quality components tested to withstand severe heat cycles, the Turner Motorsport Boost Control Maintenance Kit restores precise wastegate actuation.
Packaged by Turner - Corporate Logo
T#:15644254
Part#: 11657558922-KT
Ships in 1 Business Day
$ 2,694.99 USD
$ 2,694.99 USD
There are two turbos mounted to the engine of your BMW's motor, and this is the one located on the front of the exhaust manifold. Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". To restore the performance of your BMW, be sure to replace any failing turbocharger. Kit contains Front and rear original equipment Mitsubishi turbochargers 1 Gallon of coolant ​16 - ASA M7x39 studs 16 - Flange nuts All required gaskets and o-rings Water pump install hardware Replacement vacuum hose T-bolt clamps
Show More Show Less

Packaged by Turner - Corporate Logo
T#:582813
Part#: N55S1PPKT1
Ships in 7 Business Days
$ 781.99 USD
Free Shipping
$ 781.99 USD
Free Shipping
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes a performance K&N air filter to eliminate the first point of possible restriction, a Pheonix Racing aluminum performance charge pipe for increase flow, and a Burger Motorsports JB4 tuner module to manage your power gains every step of the way. Not for sale or use in the state of California.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:582816
Part#: N55S3PPKT
Ships in 7 Business Days
$ 2,666.00 USD
$ 2,666.00 USD
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes all of the similar components as the Stage 2 kit: a Pheonix Racing aluminum performance charge pipe for increased flow, a Burger Motorsports JB4 tuner module to manage your power gains every step of the way, a Wagner EVO 2 intercooler, and a BMS high flow intake. Stage 3 adds a Wagner catted high flow downpipe to increase exhaust flow for maximum power. Not for sale or use in the state of California.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:582812
Part#: N55S1PPKT
Ships in 7 Business Days
$ 781.99 USD
Free Shipping
$ 781.99 USD
Free Shipping
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes a performance K&N air filter to eliminate the first point of possible restriction, a Pheonix Racing aluminum performance charge pipe for increase flow, and a Burger Motorsports JB4 tuner module to manage your power gains every step of the way. Not for sale or use in the state of California.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:582814
Part#: N55S2PPKT
Ships in 7 Business Days
$ 1,767.00 USD
$ 1,767.00 USD
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes all of the similar components as the Stage 1 kit: a Pheonix Racing aluminum performance charge pipe for increased flow and a Burger Motorsports JB4 tuner module to manage your power gains every step of the way. Stage 2 adds the Wagner EVO 2 intercooler that allows for a 90% increase in airflow volume. To handle this increase in airflow, Stage 2 also includes a new BMS Intake to increase airflow without restriction. Not for sale or use in the state of California.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:340219
Part#: TMS224340
Ships in 8 Business Days
Starting at $ 2,630.84 USD
Starting at $ 2,630.84 USD
2008 E82 135i N54 Stage 2+ Power Package (for race-use only)
Peak Power Gain*: up to 125hp / 158ft-lbs
+ aFe Pro5R Dual Cone Intake
+ CP-E Catless Downpipes
+ Wagner or AA Front Mount Intercooler
+ Cobb AccessPort programmer


For a 135i race or competition car, the exhaust is an important area for upgrades. Removing the catalytic converters eliminates a choke point in the exhaust system and will free up power and torque. It also eliminates the cats as a potential failure point - a broken up cat can clog the exhaust and severly damage your motor. These cat-less DP from CP-E are some of the best we have seen. They are made from 304 stainless steel mandrel-bent piping. The flow characteristics of the piping was especially important to maximize the efficiency of the turbos. With less restriction the turbos work more efficiently and last longer.

In this package we also address the shortcomings in the factory intercooler setup. With higher boost comes more heat in the intake air and the factory intercooler does a poor job of cooling that air before it enters the engine. In the Stage 2+ package we offer multiple intercooler upgrades in increasing levels of capacity - Wagner Evo I, Wagner Evo II, and Active Autowerke Race FMIC. Each is a significant upgrade over the stock 135i FMIC. The Wagner Evo I is our standard FMIC upgrade and fits with the stock piping and requires no modification for fitment. The Wagner Evo II has greater cooling capacity and silicone piping to the stock intake. Some minor modification to plastic trim pieces is required for installation. The AA Race FMIC is the biggest and most extensive that we sell. It features a ram-air effect thanks to a special shroud around the intercooler. The installation is more extensive because AA has chosen to locate the FMIC where it will catch the most airflow from the car's frontal area.

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 2+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 2+ package lines up with the Cobb Stage 2+ tuning maps for an intake and DP (91 or 93+ octane fuel). Simply download the Stage 2+ race map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving among Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

* Note that peak power gains are quoted remain the same as Stage 2 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak. Adding a full exhaust (from the DP) will make this a Stage 3 kit in the Cobb tuning catalog.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.

This item fits the following BMWs:
2008-2010 E82 BMW 135i (N54 engine)
Show More Show Less
Packaged by Turner - Corporate Logo
T#:26705005
Part#: 090766ECS09KT2
Back Ordered
Sale - Save 8% $ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.62 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.62 USD
Free Shipping on orders $49 and up

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less


Packaged by Turner - Corporate Logo
T#:26705034
Part#: 090743ECS09KT2
Back Ordered
Sale - Save 8% $ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 230.02 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 230.02 USD
Free Shipping on orders $49 and up

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less