BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

N54 & E8x/E9x N55 Mosselman Billet Oil Thermostat
For Gasket/Install kit see T#4799665
Mosselman Turbosystems - Corporate Logo
T#:4621131
Part#: OTN54.T85
In Stock
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
The N54 engine is no stranger to oil cooling problems, that’s why we recommend installing the MSL Oil Thermostat. The standard oil thermostat will reach around 120 degrees Celsius with a normal driving style. The MSL Oil Thermostat will open at a lower temperature than the standard oil thermostat (at 85 degrees Celsius) and will keep the temperature stable between 95 and 105 degrees Celsius. Installing the MSL thermostat ensures a cooler oil temperature which will result in more stable performance, but above all this improves the reliability of the engine. It is recommended to install the thermostat, especially for cars that are tuned.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:7244442
Part#: FXXOFH-R
Ships in 1-3 days
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping
OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Performance RED Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:9901260
Part#: FXXOFH-G
In Stock
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil is a premium upgrade designed to replace the standard OEM plastic oil filter housing cap. This high-quality billet aluminum cap enhances both the aesthetics and functionality of your BMW's engine.

  • Durable Construction: Made from 6061 T6 aluminum with a hard anodized finish for superior strength and longevity.
  • Improved Performance: Features better heat dissipation compared to the factory plastic cap, enhancing engine performance and reliability.
  • Enhanced Aesthetics: Adds a sleek, high-performance look to your engine bay with 3D precision post-milled detailing and the G Insignia Oil Filter Cage Stabilizer.
  • Easy Installation: CNC-formed hand grips and a 10mm Allen key maintenance port with a built-in scratch plate simplify the installation and maintenance process.
  • Direct Replacement: Retains the factory oil filter stalk and is compatible with BMW S55 and most N series engines using BMW part 11427525334.
  • Increased Longevity: Designed to increase the life span of your oil filter cap and provide a more reliable seal.
Show More Show Less

Paradigm Engineering - Corporate Logo
T#:5269536
Part#: OILCAPNXXS55BLA
In Stock
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.
Show More Show Less

Paradigm Engineering - Corporate Logo
T#:5269538
Part#: OILCAPNXXS55BLU
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.
Show More Show Less
Paradigm Engineering - Corporate Logo
T#:5269535
Part#: OILCAPNXXS55POL
In Stock
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.
Show More Show Less

Fuel-It! - Corporate Logo
T#:589404
Part#: N54-PORTINJCONMO
In Stock
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.
Show More Show Less
Fuel-It! - Corporate Logo
T#:403509
Part#: BMW-S1LPFP-CK
Ships in 1 Business Day
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.

Paradigm Engineering - Corporate Logo
T#:5269537
Part#: OILCAPNXXS55RED
Ships in 5 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.
Show More Show Less

OMP - Corporate Logo
T#:1614
Part#: EA-462
Back Ordered
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less
Fuel-It! - Corporate Logo
T#:403280
Part#: FILPFPK4
Ships in 2 Business Days
Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping
Sale - Save 3%
$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

    • A custom anodized billet fitting for the pump output and stock fuel line connection.
    • Our custom billet aluminum anodized bracket for the pump and float assembly
    • Two cotter pins to secure your float assembly
    • A new E85 compatible Walbro 450 pump
    • Spare vent tube clip
    • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

    • A complete plug and play solution by simply adding the secondary module
    • Our custom billet aluminum fitting to run both pumps in parallel
    • A new E85 compatible Walbro 450 pump
    • Wiring harness for the secondary pump
    • Spare vent tube clip
    • A new Walbro filter
  • Recommended accessories:
    • Lock Ring Removal Tool
    • Hobb's switch 
       
  • NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.
Show More Show Less
Fuel-It! - Corporate Logo
T#:403249
Part#: FILPFPK1
Ships in 1 Business Day
Starting at $ 199.99 USD
Free Shipping
Starting at $ 199.99 USD
Free Shipping

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

  • SAE J30R10 E85 compatible fuel line
  • 14ga fuel resistant wiring harness
  • Quick connect female bullet connectors (2)
  • Vent tube replacement clip
  • Nylon cable ties (10)
  • Stainless steel lock nuts (2)
  • 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
  • Pushlock pump retention fittings (2)
  • 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

    *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

    ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less


Fuel-It! - Corporate Logo
T#:403273
Part#: FILPFPK2
Back Ordered
Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
Sale - Save 2%
$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping
Show More Show Less
Active Autowerke - Corporate Logo
T#:57616348
Part#: RTF-1L
Ships in 3 Business Days
New Item
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).
Show More Show Less