BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:23714967
Part#: NSERIESIGNCOILKT
In Stock
$ 205.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less
Bosch - Corporate Logo
T#:588121
Part#: 12138616153
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
Sluggish acceleration, misfires, and rusty terminals are symptoms of a worn coil. Located on the top of your engine, these coils should be inspected and replaced as needed or every 100,000 miles. Keep your ignition system in perfect order. Rubber integrated boot and snap-top cap. OEM Bosch Part Number: 0221504800
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38587650
Part#: N54PCVVR
In Stock
$ 40.00 USD
Free Shipping on orders $49 and up
The BMS N54 Upgraded Replacement PCV Valve is a high-performance upgrade designed to enhance crankcase ventilation and minimize excessive blow-by in BMW N54 engines. Unlike the stock PCV valve, which can degrade over time and lead to oil consumption or boost leaks, this upgraded version provides superior sealing and long-term durability. ### Key Features: - **Direct-Fit Replacement** – Designed for an exact fit, ensuring hassle-free installation. - **Optimized Ventilation** – Improves crankcase pressure management, reducing oil blow-by and deposits. - **Enhanced Durability** – Constructed from premium materials to withstand high-boost applications and prolonged use. - **Boost Leak Prevention** – Delivers a tighter seal than the factory valve, preventing power loss. - **Ideal for Tuned Engines** – A critical upgrade for N54-powered vehicles running increased boost levels. Upgrade your N54’s crankcase ventilation system with the BMS Upgraded PCV Valve to ensure maximum performance, reliability, and engine longevity.
Show More Show Less

Bav Auto Spark Plug Socket 12" x 5/8"
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580385
Part#: B8800072
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.

Burger Motorsports - Corporate Logo
T#:587715
Part#: MACSTS
In Stock
$ 51.99 USD
Free Shipping on orders $49 and up
Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!
N54/N55 Low Temp Oil Thermostat Kit - 70c
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:52621839
Part#: 008731KT1
In Stock
New Item
Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
In Stock
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less
Bosch - Corporate Logo
T#:399809
Part#: 13537622231
In Stock
$ 56.95 USD
Free Shipping on orders $49 and up
This sensor monitors the pressure of the fuel coming from the high pressure fuel pump, looking for low pressure, to determine if your HPFP is functioning correctly.

Packaged by Turner - Corporate Logo
T#:15677580
Part#: 11427540759-KT
In Stock
Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.34 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.34 USD
Free Shipping on orders $49 and up
This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)

VANOS Solenoid Valve Kit - N52 N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:25805743
Part#: 11367585425TKT
In Stock
Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.
Show More Show Less
Bosch - Corporate Logo
T#:338886
Part#: 12120032138
In Stock
Starting at $ 55.02 USD
Free Shipping on orders $49 and up
Starting at $ 55.02 USD
Free Shipping on orders $49 and up
Standard replacement Bosch Spark plug for all N52 engines -- non-turbo 6 cylinder which came in most 2006 and newer BMWs. This spark plug is often listed as BMW part# 12120032138, 12122158253 or Bosch part# 0 242 236 510.

This spark plug fits the following BMWs:

2006+ E90/E92 3 Series - including 325i, 325xi, 328i, 328xi, 330i & 330xi (coupes, sedans, wagons and convertibles) ** no turbo models
2006+ E60 5 Series - including 525i, 525xi, 528i, 528xi, 530i, 530xi, (sedans and wagons) **no turbo models
2006+ X3 SAV - including X3 3.0i & X3 3.0si
2007+ X5 SAV 6 cylinder, including X5 3.0si
2006+ Z4 Roadster & Coupe - including Z4 3.0i & Z4 3.0si

Show More Show Less
Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:34885402
Part#: 4BAR TMAP
Back Ordered
$ 139.99 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.
Bosch - Corporate Logo
T#:558831
Part#: 12317561939
In Stock
$ 61.91 USD
Free Shipping on orders $49 and up

Ensure the correct voltage is being sent to/from the alternator, keep you electrical system safe from excessive voltage peaks that could cause damage to sensitive electronics and blow out fuses. Bosch's high quality unit will give you peace of mind knowing the electrical system will be safe and the voltage will remain steady. OEM replacement for BMW part # 12317561939

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Bav Auto Tools - Corporate Logo
T#:580400
Part#: B8800089
Ships on Sep 30, 2026
Sale - Save 10% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD
Free Shipping on orders $49 and up
Used to remove fuel level and fuel pump lock rings properly to avoid damage.

N54 Valve Cover Upgrade Kit - BMW N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:25772568
Part#: 11127565284MTKT
In Stock
Sale - Save 23% $ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
The stock plastic valve cover from BMW tends to warp and crack over time due to numerous heat cycles. This leads to oil and vacuum leaks that both make a mess and negatively affect performance and reliability. Replace your stock valve cover with this aluminum upgrade from Bremmen Parts to eliminate these issues! The aluminum construction results in a significantly stronger valve cover that won't warp or crack. This kit contains everything you need to upgrade your cover, including the upgraded aluminum valve cover, valve cover gasket, oil cap, and hardware. Additionally, we've also included a new PCV blow-by hose and a Vargas PCV upgrade for additional reliability! This is especially important for tuned vehicles with upgraded turbos.
Show More Show Less
Bosch - Corporate Logo
T#:591891
Part#: 13537620946
In Stock
$ 101.99

This product was last offered at the strikethrough price on
03-17-2026

$ 57.99 USD
Free Shipping on orders $49 and up
$ 57.99 USD
Free Shipping on orders $49 and up
A vital component for high pressure fuel system function

URO - Corporate Logo
T#:578702
Part#: 22116760330
In Stock
$ 52.99 USD
Free Shipping on orders $49 and up
Don't neglect your motor mounts! Most stock BMW motor mounts are fluid-filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is significantly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine moves around, it can contact other parts in the engine bay - usually cooling-related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).
Show More Show Less
Cylinder Head Oil Check Valve
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:35863150
Part#: 11367541692
In Stock
$ 39.08 USD
Free Shipping on orders $49 and up


Genuine BMW Non-Return Valve
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N,N54,N54T

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:389684
Part#: VTT-N54-PCV
In Stock
$ 68.99 USD
Free Shipping on orders $49 and up
The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of  closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.
Show More Show Less

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
Ships in 5 Business Days
$ 29.99

This product was last offered at the strikethrough price on
09-02-2026

$ 27.53 USD
Free Shipping on orders $49 and up
$ 27.53 USD
Free Shipping on orders $49 and up
BMW E6X / E8X / E9X - N52 Replacement Starter Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777314
Part#: SR0492NKT2-KT
In Stock
Sale - Save 8% $ 296.99

This product was last offered at the strikethrough price on
03-17-2026

$ 273.79 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 296.99

This product was last offered at the strikethrough price on
03-17-2026

$ 273.79 USD
Free Shipping on orders $49 and up
Is your car having trouble starting? Does your starter click when you turn the key? Sounds like it's time for a new starter motor! Includes new starter with no core charge, intake gaskets, throttle body gasket and hardware.
Show More Show Less
OEM INA Idler / Deflection Pulley - E9x E82 E83 E60 E70
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:12945
Part#: 11287535860
In Stock
$ 23.28 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


For cars with the N52 6 cylinder engine.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2007-2010 E70 BMW X5 3.0si
2007-2010 E83 BMW X3 3.0i X3 3.0si

Show More Show Less


Packaged by Turner - Corporate Logo
T#:22163422
Part#: 11287568247TKT
Ships in 1 Business Day
Sale - Save 15% $ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Ina - Corporate Logo
T#:19307
Part#: 11287556251
In Stock
$ 41.86

This product was last offered at the strikethrough price on
03-26-2026

$ 40.99 USD
Free Shipping on orders $49 and up
$ 40.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Upper Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less
BMW N52 Valve Cover & PCV Valve Refresh Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:21735875
Part#: VALVECVRN52KT
Ships in 4 Business Days
Sale - Save 11% $ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 412.93 USD
Free Shipping on orders $49 and up
Sale - Save 11%
$ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 412.93 USD
Free Shipping on orders $49 and up
Maintaining the peak performance and reliability of your BMW N52 engine is essential for a smooth and enjoyable driving experience. One of the most effective ways to achieve this is by replacing critical components like the valve cover, crankcase vent hose, angle connector with heating element, and cylinder sleeve. In this article, we'll delve into the numerous benefits of upgrading these vital parts, ensuring your BMW N52 operates at its best. Optimized Engine Performance: Replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve enhances your BMW N52's engine performance. The valve cover plays a crucial role in sealing the engine, preventing oil leaks and ensuring optimal valve operation. When you upgrade these components, you reduce the risk of performance-robbing oil leaks and maintain precise valve timing, resulting in improved horsepower and torque. Enhanced Reliability: Reliability is paramount for any BMW owner. These components, when aged or damaged, can lead to severe engine issues. By replacing them, you significantly reduce the likelihood of unexpected breakdowns or costly repairs, ensuring your BMW N52 engine runs smoothly and reliably for years to come. Improved Fuel Efficiency: An efficiently operating engine not only performs better but also consumes less fuel. The replacement of these components leads to better combustion, reduced emissions, and ultimately improved fuel efficiency. This means fewer trips to the gas station and a lighter environmental footprint. Reduced Maintenance Costs: Regular maintenance and repairs can add up over time. By proactively replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve, you mitigate the risk of more extensive engine damage that could lead to expensive repairs down the road. In the long term, this can translate into significant cost savings. Extended Engine Lifespan: The longevity of your BMW N52 engine is directly tied to the quality and condition of its components. When you invest in high-quality replacements, you're effectively extending the lifespan of your engine. This not only preserves the value of your BMW but also allows you to enjoy its performance for years to come. Precise Temperature Control: The angle connector with heating element is vital for maintaining optimal engine temperature, especially in cold weather. A malfunctioning or worn-out connector can disrupt temperature control, affecting engine performance. Replacing this component ensures consistent and precise temperature management. Customized Upgrades: When replacing these components, you have the opportunity to choose high-performance or specialized alternatives, allowing you to customize your BMW N52 to your preferences. Whether you prioritize power, efficiency, or specific driving conditions, there are options available to tailor your engine's performance accordingly. Included in the BMW N52 Valve Cover & PCV Valve Refresh Kit: 6 Cylinder Sleeves 1 Alternator Mounting Screw Set 1 Angle Connector with Heating Element 1 Valve Cover - Gasket Included 1 Crankcase Vent Hose
Show More Show Less

70c Low Temp Oil Thermostat Kit - N54/N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:30031507
Part#: N54N55LTKT1
Back Ordered
Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

URO Valvetronic Actuator
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:34549585
Part#: 11377603979
In Stock
Sale - Save 15% $ 303.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.62 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 303.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.62 USD
Free Shipping on orders $49 and up

The URO Valvetronic Actuator is a high-quality replacement part for BMW engines, designed to restore precise control over valve timing and lift, enhancing engine performance, fuel efficiency, and responsiveness. Built to meet strict OEM standards, this actuator helps optimize the power and efficiency of BMW engines, making it an ideal solution for maintenance or repair. Available from Turner Motorsport, the URO Valvetronic Actuator ensures a reliable fit and excellent performance for BMW owners.

  • Restores optimal control over valve timing for enhanced engine efficiency
  • Improves throttle response and provides smoother acceleration
  • Contributes to lower emissions and better fuel economy
  • High-quality construction built for long-lasting durability
  • Direct-fit replacement compatible with select BMW models
  • Available from Turner Motorsport, a trusted source for BMW parts

The URO Valvetronic Actuator is a cost-effective replacement that delivers the reliable, high-performance operation BMW owners expect.

Show More Show Less
OEM INA Idler Pulley -- E88 E82 E9X
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386299
Part#: 11287578675
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

 OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

URO Vacuum Canister - BMW N54 3.0L
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:39768337
Part#: 11652247620
In Stock
$ 33.99 USD
Free Shipping on orders $49 and up
Used in the turbo system to help hold vacuum.
Rod Bearing Replacement Kit - E9X E82/88 N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:24145933
Part#: E9XN54RBRLMKT
In Stock
Sale - Save 2% $ 467.99

This product was last offered at the strikethrough price on
08-31-2026

$ 457.48 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 467.99

This product was last offered at the strikethrough price on
08-31-2026

$ 457.48 USD
Free Shipping on orders $49 and up
This kit includes everything needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter Molygen New Generation Engine Oil (5w-40) - 7 Liters Oil pan gasket RedLine assembly lube
Show More Show Less

Oil Filter Cap
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:381079
Part#: 11427525334
In Stock
$ 43.55

This product was last offered at the strikethrough price on
03-09-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up
Includes sealing o-ring

Valve Cover Gasket - Set
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:586660
Part#: 11127587804
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
Vargas Turbo Technologies - Corporate Logo
T#:7530040
Part#: VACUUMCANBLUE
In Stock
$ 199.99 USD
Free Shipping on orders $49 and up
VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620
Show More Show Less
N54 AC Delete Accessory Belt Kit - BMW N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:26771665
Part#: 7PK1660KT
In Stock
Sale - Save 13% $ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.28 USD
Free Shipping on orders $49 and up
Sale - Save 13%
$ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.28 USD
Free Shipping on orders $49 and up
This AC Delete Accessory Belt Kit includes a new idler pulley and a shorter ECS Kevlar belt for deleting your AC compressor. ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432
Show More Show Less


Ina - Corporate Logo
T#:19306
Part#: 11287557851
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less
URO - Corporate Logo
T#:39768334
Part#: 13907618652
In Stock
$ 100.99 USD
Free Shipping on orders $49 and up
Allows fuel tank vapors to be vented, preventing excess pressure build-up.
Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 750cc - ...
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...
Bosch - Corporate Logo
T#:36947243
Part#: 501-0028
In Stock
$ 409.99 USD
Free Shipping on orders $49 and up
$ 409.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less

VTT Billet Power Steering Pulley - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:7292042
Part#: VTT-N54-PSN54
Ships in 2 Business Days
Starting at $ 56.99 USD
Free Shipping on orders $49 and up
Starting at $ 56.99 USD
Free Shipping on orders $49 and up
Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.
Show More Show Less

URO - Corporate Logo
T#:22163415
Part#: 16117163295
Back Ordered
$ 162.99 USD
Free Shipping on orders $49 and up
Fuel filter repair kit located inside fuel tank next to fuel pump. Includes filter with integrated fuel pressure regulator and required o-rings.
TurboSmart - Corporate Logo
T#:28504207
Part#: TS-0811-0012
In Stock
10% off MSRP $ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD
Free Shipping on orders $49 and up

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

Show More Show Less

Performance Rod Bearing Replacement Kit - N55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:36032373
Part#: N55-WPC-RBKT2
In Stock
Sale - Save 6% $ 844.90

This product was last offered at the strikethrough price on
05-03-2026

$ 790.38 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 844.90

This product was last offered at the strikethrough price on
05-03-2026

$ 790.38 USD
Free Shipping on orders $49 and up

This kit includes every thing needed to replace your rod bearings.

Kit includes

Upper and lower WPC-treated rod bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less
URO Positive Cable Battery Connection Pole
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:42436713
Part#: 61129217031
In Stock
$ 130.99 USD
Free Shipping on orders $49 and up
If your BMW has been in an accident and the Battery Safety Terminal (BST) has been triggered, you'll need a new positive battery cable connection to restore power and get the vehicle running again.

Borescope Camera with Light For Phone
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:32450134
Part#: PHONEBORESCOPE
In Stock
Sale - Save 3% $ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up

The Borescope Inspection Camera offers 1920P HD resolution, a flexible 7.9mm probe, and a 16.4ft semi-rigid cable, making it ideal for inspecting hard-to-reach areas. Easily connect to IOS and Android devices, and use the IP67 waterproof probe for various applications, including automotive, plumbing, and home inspections.


Key Features:

  • 1920P HD Resolution: Capture clear images and high-quality video at 1920x1440 resolution.
  • Easy Connection: Connect quickly to IOS 9.0+ and Android 7+ devices via the 'SUP-ANESOK' app.
  • Semi-Rigid Cable: 16.4ft cable offers a mix of flexibility and rigidity for precise inspections.
  • Waterproof Probe: IP67-rated, capable of operating underwater up to 3.28 feet for 1 hour.
  • Wide Applications: Suitable for automotive, plumbing, and home inspections, with adjustable brightness for low-light environments.


Includes:

  • Borescope Camera
  • Android Adapter
  • Lightning Port Adapter
  • USB Type-C Connector
  • 16.4 ft. Semi-Rigid Cable
  • Magnet
  • Hook
  • Mirror
  • Protective Cap
  • Manual


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:22130432
Part#: 11287530314TKT
In Stock
Sale - Save 18% $ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
OEM INA Deflection Pulley -- E88 E82 E9X E84
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386298
Part#: 11287578674
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Oil Pan Gasket - Multiple BMWs
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:24145943
Part#: 11137600482
In Stock
$ 25.57 USD
Free Shipping on orders $49 and up
Replace your worn out and leaking oil pan gasket and avoid having to top off between oil changes.


URO VANOS Solenoid Valve - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:637393
Part#: 11367585425
In Stock
$ 60.99 USD
Free Shipping on orders $49 and up
Common cause of check engine light and limp mode after running the car hard. Restarting the car commonly clears the code and/or limp mode. Two different problem codes, 2A87 "Outlet-Vanos variable cam control test" and "2A82 Inlet-Vanos variable cam control test", are thrown indicating the possibility of various VANOS-related problems. If a solenoid valve needs replaced, this part is appropriate for both situations, outlet and inlet.
Show More Show Less
URO Power Distribution Box With Fuse - BMW E8X 1
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:49822552
Part#: 61146971370
Back Ordered
$ 91.99 USD
Free Shipping on orders $49 and up
Ensures the appropriate amount of power is sent to electrical vehicle components.