BMW Fuel System Parts for BMW 1 Series E82 (2008-2013)

Genuine BMW Gas Cap - Most BMWs 2000+

T#:2788

Part#: 16117222391

In Stock

9% off MSRP $ 40.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.69 USD

Add to Wish List

Qty

9% off MSRP

$ 40.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.69 USD

Add to Wish List

This fuel cap is an original BMW product. A faulty gas cap can often be the cause a fault code and trigger a "check engine" light.

Vitesco Fuel Injector With Seal Ring - Index 12 - BMW N54 N63 S63 ...

T#:30629652

Part#: 13538616079

In Stock

12% off MSRP $ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 490.99 USD

Add to Wish List

Qty

12% off MSRP

$ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 490.99 USD

Add to Wish List

If you are experiencing a rough idle, misfire, or check engine light, this could be the problem. Earlier fuel injectors for the N54 have been a common failure item, this is the most up to date injector for the N54 engine. It is highly recommended to replace older injectors also if your car is modified or you plan to modify it. Important information to consider when replacing injectors: It is recommended to replace at least 3 injectors at a time, replacing all injectors in a cylinder bank, instead of mixing and matching. If ALL injectors in a bank are index 11 or greater, injectors may be replaced individually with a new injector. If your stock injectors are index 10 or less, all 3 injectors per bank must be replaced. For V8s, all four in that bank must be replaced. Vehicles with old injector 7585261 will need to inspect their existing injectors to determine if these can be replaced individually. Replacement also requires 13537564751 for each injector.

Show More Show Less

BMW N54 3.0L Fuel Injector Installation Kit - Single

T#:377916

Part#: 13537564751KT

In Stock

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

BMW N54 3.0L Fuel Injector Installation Kit - Single is essential for anyone looking to replace fuel injectors in their BMW engine. This kit includes all the vital components needed for a smooth installation, ensuring optimal performance and reliability. ECS Tuning has designed this kit to simplify the injector replacement process.

Benefits:

Comprehensive Kit: Includes everything necessary for a complete fuel injector replacement.
Genuine BMW Parts: Features high-quality OEM components for guaranteed fit and performance.
Improved Reliability: Ensures a proper seal and connection, reducing the risk of leaks and engine issues.
Easy Installation: Designed for straightforward installation, making it user-friendly for DIY mechanics.
Optimal Performance: Helps maintain engine efficiency and performance by ensuring proper fuel delivery.

Show More Show Less

Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...

T#:1331979

Part#: 601-0176

In Stock

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

BMW B46 B48 B58 Ethanol Content Sensor

We Price Match - Give Us A Call or Chat!

T#:29500150

Part#: 100.1037

In Stock

$ 98.99

This product was last offered at the strikethrough price on
08-24-2026

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

BMW B46 B48 B58 Ethanol Content Sensor is a genuine Continental (VDO) Flex Fuel E85 sensor designed to accurately measure the ethanol-to-gasoline ratio in your vehicle's fuel system.

Accurate Measurement: Measures the ethanol content in fuel, providing precise data for optimal engine performance and fuel management.
Flexible Compatibility: Works with a blend of ethanol and gasoline, suitable for vehicles with appropriate fuel lines, injectors, and ECU calibration.
Quick-Connect Installation: Features quick-connect style fuel connections for easy installation in the main fuel feed line.
Integrated Fuel Analysis: All fuel passes through the sensor before reaching the fuel rail, allowing for accurate ethanol percentage readings sent to the vehicle's DME or ECU.
Standard Fittings: Both inlet and outlet connections are 3/8" SAE sized fittings for straightforward integration with existing fuel systems.

This ethanol content sensor is essential for vehicles running flex fuel, ensuring that the engine receives the correct ethanol ratio for peak performance and efficiency.

Show More Show Less

Genuine BMW Fuel Injector Installation Kit - Set - N54

T#:374356

Part#: N54INJINSKT

In Stock

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

When replacing fuel injectors, there are some vital components that have to be replaced at the same time that are included in this kit.

Kit includes:

6 Genuine BMW injector seals
6 Genuine BMW de-coupling elements

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37757295

Part#: 601-0240

Ships in 6 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Bucketed Low-Pressure Fuel Pump Kit - Stage 2.5v2 - BMW E9X E8X ...

T#:1165728

Part#: 601-0177

In Stock

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 550whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Filler Cap - Priced Each

T#:596863

Part#: 16117470341

In Stock

$ 35.74 USD

Add to Wish List

Qty

$ 35.74 USD

Add to Wish List

Genuine BMW Sky Blue Relay - Multiple BMWs

T#:21328

Part#: 61366915327

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Commonly used in multiple BMWs, usually controlling fuel pump operation.

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks ...

T#:38161701

Part#: 101-0257

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

6-micron filtration – Removes fine particles and contaminants to protect engine components
High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
Optimized fuel flow – Maintains consistent fuel delivery for peak performance
Durable construction – Engineered for long-lasting reliability in high-demand applications
Easy replacement – Simple installation for routine maintenance
Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as needed
Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

Genuine BMW Adapter

T#:199513

Part#: 12518638006

Ships in 1-2 days

4% off MSRP $ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Qty

4% off MSRP

$ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Genuine BMW Adapter - Hmk
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E92,E93,F02,F06,F10,F12,F13,F15,F22,F25 X3,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N18,N20,N26,N55,N63N,S63N

Show More Show Less

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55

T#:38094311

Part#: 201-0188

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

Seamless fit – Compatible with most aftermarket top mount port injection manifolds
Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
Leak-proof design – Dual-seal quick connectors for maximum fuel safety
High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
Easy installation – Direct plug-and-play with factory and aftermarket fuel lines

Show More Show Less

Genuine BMW Low Fuel Pressure Sensor - Multiple BMWs

T#:20691

Part#: 13537614317

In Stock

$ 237.40

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.99 USD

Add to Wish List

Qty

$ 142.99 USD

Add to Wish List

This Genuine BMW low pressure fuel sensor is commonly a cause of a "Increased Emissions" warning on the idrive and for check engine (SES) lights on BMW's with the N54 6 cylinder turbo engine or the S65 V8 engine in the M3. It will also fit a limited number of cars with the N55 engine.

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37892104

Part#: 601-0288

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Precision Raceworks Upgraded Fuel Lines W/ Ethanol Sensor Connection ...

T#:10714270

Part#: 201-0247

In Stock

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

NOTE: Requires a Continental Flex Fuel Sensor be utilized, will not directly replace the OE fuel line. The Precision Raceworks AN6 Fuel line upgrade is a direct replacement from the fuel filter on the driver’s side of the car to the high-pressure fuel pump. All connections are designed in-house and machined from 6061 aluminum then anodized for 100% E85 compliance. All female connectors have 2 seals (a primary and secondary seal) to guarantee no possible fuel leaks. The fuel line used by Precision Raceworks is smooth bore PTFE hose that is wrapped in a Stainless Steel braiding for protection and then a nylon braiding to protect surfaces. This type of hose is used in high-end E85 applications built all over the world. This is a better than OEM quality solution to help you achieve the needs of your high horsepower build on E85. Specifications: Fuel hose type: PTFE Smooth Bore Line Size: -6AN (1/2") Connection Style: OEM Quick Connect Connector Material: 6061 Aircraft Grade Aluminum Connects to flex fuel sensor: Yes

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161736

Part#: 201-0405

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Vitesco Fuel Injector Replacement Kit - Index 12 - BMW N54

T#:33479594

Part#: 13538616079V1KT

In Stock

$ 3,089.99

This product was last offered at the strikethrough price on
08-17-2026

$ 3,059.99 USD

Add to Wish List

Qty

$ 3,059.99 USD

Add to Wish List

The N54 fuel injector (13538616079) is a high-precision component designed to deliver fuel efficiently to the engine, ensuring optimal combustion and performance. It plays a key role in maintaining the N54's power output and fuel economy. Regular maintenance or replacement is essential, as worn injectors can lead to misfires, rough idling, or reduced performance. Ideal for enthusiasts looking to keep their N54 engine running smoothly.

Show More Show Less

Genuine BMW Fuel Tank Ventilation Valve - E60/61 E71 E82/88 E9X F01/0...

T#:43803

Part#: 13907618652

In Stock

$ 142.97 USD

Add to Wish List

Qty

$ 142.97 USD

Add to Wish List

This valve is part of the fuel tank vent system, it lets dangerous gases escape the fuel tank.

Genuine BMW Fuel Tank Ventilation Valve With Pipe
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...

T#:5216002

Part#: 601-0110

In Stock

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 1000whp on 93 octane pump gas or 875whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~1000whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

High Pressure Pipe

T#:42219

Part#: 13537576771

Ships in 1 day

Sale - Save 8% $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.05 USD

Add to Wish List

Qty

Sale - Save 8%

$ 83.99

This product was last offered at the strikethrough price on
08-26-2026

$ 77.05 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

Precision Raceworks Universal Adjustable Fuel Pressure Regulator W/ 1...

T#:38195449

Part#: 501-0043

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.

Fuel Filter w/ Pressure Regulator Repair Kit - E90 E92 335i 335xi E82...

T#:15067

Part#: 16147163296

Ships in 2 Business Days

8% off MSRP $ 268.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 246.99 USD

Add to Wish List

Qty

8% off MSRP

$ 268.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 246.99 USD

Add to Wish List

This Genuine BMW fuel filter/fuel pressure regulator is located in the fuel tank on the left hand side. BMW officially claims these are "lifetime"units, but in practice We recommend preventative replacement of the fuel filter at 60-80,000 mile intervals.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Often a clogged fuel filter can cause any number of driveability issues including stalling and cold start problems. br>
This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2007-2010 E90 BMW 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe

Show More Show Less

Genuine BMW Fuel Tank Breather Valve with Breather Line - E82 E88 E92...

T#:43824

Part#: 13907636153

In Stock

2% off MSRP $ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 140.99 USD

Add to Wish List

Qty

2% off MSRP

$ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 140.99 USD

Add to Wish List

Genuine BMW Fuel Tank Ventilation Valve With Pipe -
This item fits the following BMW Chassis:
E82,E90,E92,E93,F22,F30,F32,F33,F36

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Fuel Pump Control Unit Module - E60/61 E70/71 E82/88 E9X ...

T#:45473

Part#: 16147229173

In Stock

Sale - Save 23% $ 417.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 320.90 USD

Add to Wish List

Qty

Sale - Save 23%

$ 417.99

This product was last offered at the strikethrough price on
05-02-2026

$ 320.90 USD

Add to Wish List

If this unit has failed, the fuel pump will no longer operate properly. Replace it to restore proper operation and get your BMW back on the road.

Genuine BMW Control Unit For Fuel Pump -
This item fits the following BMW Chassis:
E70 X5,E71,E82,E89 Z4,E90,E92,E93

Fits BMW Engines including:
M57,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW High Pressure Fuel Pressure Sensor

T#:42151

Part#: 13537537319

In Stock

15% off MSRP $ 122.21

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 104.34 USD

Add to Wish List

Qty

15% off MSRP

$ 122.21

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 104.34 USD

Add to Wish List

Genuine BMW Sensor, High-Pressure
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E82 1M Coupe,E70 X5,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F10,F12,F13

Fits BMW Engines including:
N54,N54T,N63,N63N,S63

Show More Show Less

Genuine BMW Fuel Hose - 1 Meter

T#:41534

Part#: 13311272750

Ships in 2 Business Days

3% off MSRP $ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

3% off MSRP

$ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 6X11mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E30,E34,E36,E38,E46

Genuine BMW Fuel Injector Installation Kit - N55 3.0L

T#:376798

Part#: 13537577649KT

In Stock

$ 174.99 USD

Add to Wish List

Qty

$ 174.99 USD

Add to Wish List

Genuine BMW High Pressure Fuel Pipe - N55 3.0L

T#:42221

Part#: 13537576776

Ships in 1 day

4% off MSRP $ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

4% off MSRP

$ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW High Pressure Fuel Pressure Sensor - N55 3.0L, B38 1.5L, ...

T#:42256

Part#: 13537620946

Ships in 2 Business Days

9% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

9% off MSRP

$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Genuine BMW Sensor, High-Pressure

Precision Raceworks Bucketed High Performance Fuel Pump Kit - Stage 2...

T#:8169508

Part#: 601-0116

In Stock

$ 594.99 USD

Add to Wish List

Qty

$ 594.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85 and flow up to 3.9 liters per minute. The included Genuine Walbro 535 (F90000295) fuel pump is capable of flowing up to 350% more fuel than the factory fuel pump and is 100% E85 compliant. Precision Raceworks' Stage 2.5 V2 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 650whp (Rated for 550whp on 100% E85) and is ready to grow with you as your needs demand. Unlike other manufacturers, Precision Raceworks is the only company featuring a bucketed kit with a modular design. This means you can purchase their stage 3 pump module or Stage 3.5 module and upgrade the pump as your needs change. If you are looking for a 100% assembled drop-in-ready solution, this is the choice for you! **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Features & Specifications: Lock Ring Tool Included Pump flow 72psi (5bar): 1.0 GPM / 3.9 LPM Pump Weight: 3.98 lbs Horsepower Supported Pump Gas: 650 Horsepower Supported 100% E85: 550 Aftermarket EKP Required: No

Show More Show Less

BMW Secondary Pump Activation Harness - BMW E9X F22/23 F3X F8X ...

T#:38094337

Part#: 201-0049

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Precision Raceworks' BMW Secondary Pump Activation Harness is the top choice among pump manufacturers and tuners for controlling auxiliary fuel pumps. This kit is considered the most complete and highest quality kit on the market and is sold private label to many BMW pump manufacturers. That is why this harness is the #1 method of secondary pump control on the market around the globe.

Show More Show Less

Genuine BMW High Pressure Fuel Injection Pump - N54 N55 135i, 335i, 5...

T#:360279

Part#: 13517616170

In Stock

$ 1,650.57 USD

Add to Wish List

Qty

$ 1,650.57 USD

Add to Wish List

This is the updated high-pressure fuel pump for BMW's with the N54 or N55 turbo engine. When doing any sort of repair or maintenance, there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence. Includes a $413.00 refundable core charge

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 3 - ...

T#:5215998

Part#: 601-0018

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, of supporting up to 1050whp on 93 octane pump gas or 875whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed! With an open expansion slot ready to use, just a simple Stage 3.5 or Stage 4 module is all you need to purchase to increase your fueling capabilities. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you. Stage 2 Specifications: Horsepower Supported Pump Gas: ~1050whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No *To reach the advertised ability of these fuel pumps use of the Precision Raceworks in-tank filter regulator assembly is required.

Show More Show Less

Genuine BMW Fuel Filter w/ Regulator - E9x 325i, 328i, 330i, 335i - E...

T#:15032

Part#: 16117163295

In Stock

11% off MSRP $ 268.32

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.99 USD

Add to Wish List

Qty

11% off MSRP

$ 268.32

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.99 USD

Add to Wish List

We recommend preventative replacement of the fuel filter at 80-100,000 mile intervals. BMW called them "lifetime" but there's no question that any filter is going to get saturated with debris and dirt and its performance will suffer. The dirty filter can cause E90/E92 running issues like stalling, poor performance, rough running, chugging. We have replaced these filters in cars with 130,000+ miles and found the original filter was long overdue for replacement. These cars had the above driveability problems but had no fault codes or DTCs (which led to other shops making poor service recommendations). So we recommend having this done at the 80-100,000 mile mark as a scheduled maintenance item. There's no harm or downside to replacing it before it's completely clogged and your engine starts to suffer.

The fuel filter is located on the driver's side and includes two new large o-rings for the lock rings. The crossover lines to the fuel pump on the passenger side are included as well. We recommend new steel lock rings for the filter and the pump, especially on cars located in the Rust Belt or in salty climates. On really high mileage cars it would be a good idea to also replace the fuel pump as preventative maintenance since the job is essentially the same. The E9X fuel filter replacement is not complex but access can be difficult and you're dealing with potentially fragile plastic so amateurs may want to leave this to a professional technician.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Not for N51 SULEV engines in 128i/328i/328xi. Check with your BMW dealer on SULEV parts that may be covered under an extended warranty.

This item fits the following BMWs:
2008+ E82 BMW 128i
2010-2011 E82 BMW 135i 135is
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive - Sedan
2006-2013 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2011 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2007-2011 E93 BMW 335i Convertible

Show More Show Less

Genuine BMW N54 / N63 Fuel Injector (Index 12) - E9x 335i, E60 535i &...

T#:177104

Part#: 13538616079

In Stock

1% off MSRP $ 930.04

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 923.99 USD

Add to Wish List

Qty

1% off MSRP

$ 930.04

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 923.99 USD

Add to Wish List

Replace your faulty N54 / N63 engine's high pressure fuel injector with this latest generation Genuine BMW part. This part replaces 13537585261 and 13537565138 and has improved filtering and thermo compensating oil than previous versions. Sold individually!

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2013 E92 BMW 335is - Coupe
2007-2010 E93 BMW 335i - Convertible
2010-2013 E93 BMW 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
2010-2012 F07 BMW 550i GT, 550i xDrive GT
2011-2012 F10 BMW 550i 550i xDrive
2012 F12 BMW 650i 650i xDrive
2009-2012 F01 BMW 740i 740li 740li xDrive 750i 750li 750i xDrive 750li xDrive 760li
2009-2012 F01 BMW 760li
2011-2013 E70 BMW X5 xDrive50i
2010-2013 E70 BMW X5M
2008-2010 E71 BMW X6 xDrive35i X6 xDrive50i X6M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is

Show More Show Less

High Pressure Pipe

T#:42220

Part#: 13537576772

In Stock

Sale - Save 8% $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.05 USD

Add to Wish List

Qty

Sale - Save 8%

$ 83.99

This product was last offered at the strikethrough price on
08-26-2026

$ 77.05 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 5 Bar

T#:38094305

Part#: 601-0260

Back Ordered

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

AN6 Male Flare/ORB To 5/16" (7.89mm) Female Quick Connect

T#:38094309

Part#: 201-0274

Ships in 5 Business Days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?

Show More Show Less

Replacement Fuel Filter Element - Single Open 10 Micron | Precision R...

T#:38161702

Part#: 101-0256

Ships in 9 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
Versatile use – Perfect for daily driving, street, and high-performance applications
Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as necessary
Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...

T#:5215999

Part#: 601-0096

Ships in 8 Business Days

$ 519.99 USD

Add to Wish List

Qty

$ 519.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Black Market Parts Fuel Pump Expansion Modules - Stage 3 - BMW E9X E8...

T#:38195447

Part#: 601-0019

In Stock

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Black Magic Parts' (by Precision Raceworks) bucketless low pressure fuel pumps are designed for customers looking to run all blends of E85. The pump ships assembled with an OEM connector to plug into the factory fuel pump top hat making it quick and easy to install. Our Stage 3 bucketed module will add a 450 pump to your existing PR Stage 2 or 2.5 kit. This will include all necessary hardware and wiring to upgrade your pump to a stage 3 and support up to 1000whp* (Rated for 875whp on 100% E85)

Show More Show Less

PNP Ethanol Sensor Harness For Motiv Re|Flex Plus

T#:38161679

Part#: 201-0410

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

T#:38161743

Part#: 622-0270

Ships in 10 Business Days

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit includes Precision Raceworks' 6 Bar static micro fuel regulator. This regulator is the simplest way to move your fuel pressure regulation to the engine bay, requiring no adjustment or vacuum lines.

Show More Show Less

Genuine BMW Fuel hose

T#:42244

Part#: 13537594825

Ships in 1 day

5% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.00 USD

Add to Wish List

Qty

5% off MSRP

$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.00 USD

Add to Wish List

Genuine BMW Fuel Hose
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F25 X3

Fits BMW Engines including:
N54,N54T,N55

Genuine BMW Fuel Pressure Sensor - Multiple BMWs

T#:42257

Part#: 13537622231

Ships in 1 day

8% off MSRP $ 146.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 134.99 USD

Add to Wish List

Qty

8% off MSRP

$ 146.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 134.99 USD

Add to Wish List

Located on the fuel supply line, this sensor monitors the fuel pressure coming from the fuel pump to regulate how much fuel your engine is getting. It monitors for low fuel pressure to let you know if there are issues with your low-pressure fuel pump.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...

T#:1331984

Part#: 601-0062

In Stock

$ 424.99 USD

Add to Wish List

Qty

$ 424.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Black Market Parts (by Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2+ bucketless fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 575whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 950cc - BMW N54/N55 3.0...

T#:38262759

Part#: 601-0188

In Stock

$ 959.99 USD

Add to Wish List

Qty

$ 959.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 950cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi). This means Precision's BMP Port Injection Kit is capable of supporting builds from 500whp up to 1,000+whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Genuine BMW High Pressure Fuel Pipe - Price Each

T#:42148

Part#: 13537536565

In Stock

4% off MSRP $ 75.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD

Add to Wish List

Qty

4% off MSRP

$ 75.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD

Add to Wish List

Genuine BMW High Pressure Pipe
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - ...

T#:1165729

Part#: 601-0017

In Stock

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 600whp on 93 octane pump gas or 550whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Benefits:

Fuel Filter Replacement Guidelines:

Fuel Filter Replacement Guidelines:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results