BMW Intake Parts for BMW 1 Series E82 (2008-2013)

VRSF OEM Replacement Charge Pipe C-Clip

We Price Match - Give Us A Call or Chat!

T#:585048

Part#: 504020

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Replacement C-Clip for OEM & Aftermarket Charge Pipes

Replacement N55 Performance Filter, No Hardware

T#:3586313

Part#: REPLACEMENT-N55F

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

Designed for N55 engines
Optimizes airflow for increased power
Improves throttle response and fuel efficiency
Protects engine from contaminants

Show More Show Less

VRSF Upper Chargepipe Upgrade Kit - N55

We Price Match - Give Us A Call or Chat!

T#:584877

Part#: 10901020A

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.

Show More Show Less

VRSF Performance HD Stepped Intercooler Upgrade Kit - 5" - N54/N55 ...

We Price Match - Give Us A Call or Chat!

T#:585062

Part#: 10903070

In Stock

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Get the most out of your N54 or N55 engine by replacing the factory intercooler with this Race intercooler kit from VRSF. This race intercooler will allow for more horsepower gains by reducing intake temperatures and preventing heat soak. With this intercooler you can expect a 2-3 degree temperature rise during a 3rd gear pull, compared to a 32 degree rise on a OEM intercooler.

Show More Show Less

BMS Replacement DCI Filters - Red

T#:38890884

Part#: BMS-N54-DCIR-R

Back Ordered

$ 79.00 USD

Add to Wish List

Qty

$ 79.00 USD

Add to Wish List

High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.

Show More Show Less

Burger Motorsports Performance Intake - Blue Filter - E82/88 135i, E9...

Not for sale or use in the state of California.

T#:556783

Part#: BMS-N55-INT

In Stock

$ 219.00 USD

Add to Wish List

Qty

$ 219.00 USD

Add to Wish List

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

Adds up to 10+ Horsepower
Dramatic sound improvement
Super fast install and removal
Improves throttle response
Retains OEM airbox base as a heat shield
Retains OEM cold air ducting
Looks great under the hood
Cleanable and reusable filter
Made in the USA

Show More Show Less

VRSF Competition HD Intercooler Upgrade - 7.5" - N54/N55

We Price Match - Give Us A Call or Chat!

T#:585058

Part#: 10903040

In Stock

19% off MSRP $ 529.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD

Add to Wish List

Qty

19% off MSRP

$ 529.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD

Add to Wish List

Get the most out of your N54 or N55 engine by replacing the factory intercooler with this 7.5" Race intercooler kit from VRSF. This race intercooler will allow for more horsepower gains by reducing intake temperatures and preventing heat soak.

Show More Show Less

Genuine BMW Intake Manifold Profile Gasket Set (Set of 6) - E90 E92 E...

T#:14621

Part#: 11617547242

In Stock

22% off MSRP $ 56.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.95 USD

Add to Wish List

Qty

22% off MSRP

$ 56.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.95 USD

Add to Wish List

This set of 6 gaskets is to seal the intake manifold to the cylinder head. These are absolutely crucial to prevent vacuum and intake air leaks and lean running conditions. These are also usually replaced when adding the 330 manifold to a 325, 328. Price is for a set of 6 - one for each intake runner. On cars with V8 engines 2 sets are required.

Show More Show Less

Genuine BMW Crank Case Fasteners - N54 3.0L, N52 3.0L, N55 3.0L ...

T#:30544

Part#: 11110392552

In Stock

2% off MSRP $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Qty

2% off MSRP

$ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Genuine BMW Set Of Alu. Screws Crank Case
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Burger Motorsports Red Dual Cone Intake (DCI) - N54 135/335/535, Z4 3...

CARB certified for sale in all 50 states

T#:556765

Part#: BMS-N54-DCI-R

EO#: D-744-2

In Stock

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less

Burger Motorsport 4 BAR TMAP Sensor & Adapter - BMW N55/N54/S55 (2007...

T#:34885402

Part#: 4BAR TMAP

In Stock

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.

Burger Motorsports Blue Dual Cone Intake (DCI) - N54 135/335/535, Z4 ...

CARB certified for sale in all 50 states

T#:556768

Part#: BMS-N54-DCI-B

EO#: D-744-2

In Stock

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less

VRSF 2" OEM Location High Flow Silicone Inlet Kit - N54

We Price Match - Give Us A Call or Chat! 2" Inlets

T#:585222

Part#: 10901052

In Stock

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Improve your restrictive OEM intake with this 2" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.

Show More Show Less

VRSF Chargepipe Upgrade Kit - N54

We Price Match - Give Us A Call or Chat!

T#:584880

Part#: 10901020D

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish.

Show More Show Less

Genuine BMW MAP Pressure Sensor - BMW N20 N26 N55 S55 N63 S63 ...

For vehicles with a production date from 03/2011

T#:539293

Part#: 13628644432

In Stock

5% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 154.99 USD

Add to Wish List

Qty

5% off MSRP

$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 154.99 USD

Add to Wish List

The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in your N55 engine's electronic control system. The manifold absolute pressure sensor provides instantaneous manifold pressure information to the engine's electronic control unit (ECU/DME). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion, efficiency, and ignition timing. Fits BMW Engines including: N20,N26,N55,N63,N63N,S55,S63N

Show More Show Less

VRSF High Flow Aluminum Intake Inlet Kit - E8X/E9X N55

We Price Match - Give Us A Call or Chat!

T#:585195

Part#: 10901055

In Stock

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

This inlet will dramatically increase flow, especially when in mid to upper RPM range, as well as a more aggressive exhaust note.The VRSF inlet solution is unique in that it features a CNC'd aluminum flange that offers a larger overall inside diameter, increasing flow and decreases back pressure. This product is compatible with any OEM or after market intake and any upgraded turbo that is compatible with the OEM intake.

Show More Show Less

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

2X Entries Into Our F80 M3 Sweepstakes

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

URO MAP Sensor - 13628644432

For vehicles with a production date from 03/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:28271178

Part#: 13628644432

In Stock

$ 51.73 USD

Add to Wish List

Qty

$ 51.73 USD

Add to Wish List

The Manifold Absolute Pressure sensor provides pressure information to the engine control unit to calculate air density for determining the engine’s air mass flow rate. A faulty MAP sensor can upset the fuel mixture and ignition timing, causing a surge, rough idle, and a rich fuel condition which can lead to spark plug fouling and a loss of power and fuel economy.

Features:

Guaranteed fitment Replaces failed pressure sensor to restore proper airflow measurement Helps correct air/fuel mixture for optimal fuel economy Easy plug-and-play wiring connection

Show More Show Less

Genuine BMW Crank Case Vent Hose - E82/88 E9X N55 3.0L

T#:31506

Part#: 11127584128

In Stock

2% off MSRP $ 55.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.79 USD

Add to Wish List

Qty

2% off MSRP

$ 55.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.79 USD

Add to Wish List

Connects to the CCV on the valve cover

BMS Replacement DCI Filters - Blue

T#:38890886

Part#: BMS-N54-DCIR-B

In Stock

$ 89.00 USD

Add to Wish List

Qty

$ 89.00 USD

Add to Wish List

High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.

Show More Show Less

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel ...

T#:21933055

Part#: N54PIIMINJECT

In Stock

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

VRSF Chargepipe Upgrade Kit - N54

We Price Match - Give Us A Call or Chat!

T#:584879

Part#: 10901020C

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.

Show More Show Less

Genuine BMW Vacuum Control Valve

T#:361080

Part#: 11747810831

In Stock

10% off MSRP $ 61.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.64 USD

Add to Wish List

Qty

10% off MSRP

$ 61.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.64 USD

Add to Wish List

Ensure optimal performance in your BMW with the Turner Motorsport Genuine Vacuum Control Valve, part number 11747810831. This solenoid-operated vacuum control switch is a crucial component used in various applications throughout your vehicle. Designed to meet the high standards of Genuine BMW parts, this valve ensures reliable operation and compatibility with your BMW model.

Key Benefits:

Genuine BMW quality assurance
Solenoid-operated for precise control
Essential component for multiple applications
Ensures reliable operation
Compatible with various BMW models

Show More Show Less

VRSF 1.75" OEM Location High Flow Silicone Inlet Kit - N54

We Price Match - Give Us A Call or Chat! 1.75" Inlets

T#:585220

Part#: 10901050

In Stock

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Improve your restrictive OEM intake with this 1.75" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.

Show More Show Less

Burger Motorsports Upgraded Intake Coupler - N55 BMW

Not for sale or use in the state of California.

T#:556785

Part#: BMS-E-N55-INT-C

In Stock

$ 24.00 USD

Add to Wish List

Qty

$ 24.00 USD

Add to Wish List

When upgrading your intake, such as with the Burger Motorsports Performance Intake, your coupler is only good for stock vehicles. At boost pressure higher than stock, the stock accordion coupler is likely to collapse, suffocating your engine from air flow and potentially causing it to stall. With this 5 layer silicon upgraded coupler from Burger Motorsports, you can run your car as hard as possible even with upgraded turbos or port injection and will never have to worry about the coupler collapsing.

Show More Show Less

Genuine BMW Fuel Tank Ventilation Valve - E60/61 E71 E82/88 E9X F01/0...

T#:43803

Part#: 13907618652

In Stock

$ 142.97 USD

Add to Wish List

Qty

$ 142.97 USD

Add to Wish List

This valve is part of the fuel tank vent system, it lets dangerous gases escape the fuel tank.

Genuine BMW Fuel Tank Ventilation Valve With Pipe
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

URO Fuel Tank Breather Valve - BMW E9X E82/88 E60 Z4 N54 3.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:39768334

Part#: 13907618652

In Stock

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Allows fuel tank vapors to be vented, preventing excess pressure build-up.

VRSF Performance Intake Air Filter Kit - N54

We Price Match - Give Us A Call or Chat!

T#:585223

Part#: 10901010

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Replace the restrictive factory filter system with the VRSF performance intake/air filter kit. The inverted S&B intake filters greatly increase flow in the mid to upper RPM range while introducing a more aggressive engine note. Gains of up to 20whp can be realized by replacing the restrictive factory intake with this bolt on kit. Everything needed for installation is included in this kit.

Show More Show Less

VRSF N55 Turbo Outlet Charge Pipe (TIC) E & F Chassis 10-17 BMW 135i/...

We Price Match - Give Us A Call or Chat!

T#:593732

Part#: 10901020E

Ships in 7 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

This aluminum charge pipe by VRSF features a billet aluminum turbo connection and comes finished in a brushed aluminum. Replacing your plastic OEM inlet with this heavy duty, mandrel bent aluminum pipe offers a larger diameter pipe, increasing flow. Increase throttle response and decreases turbo lag. Brushed aluminum finish Billet CNC flanges for a leak free connection. Includes everything necessary to upgrade from factory charge pipe. Lifetime warranty. Does not include o-rings

Show More Show Less

Burger Motorsports Performance Intake - Red Filter - E82/88 135i, E9X...

T#:32549458

Part#: BMS-N55-INT-RED

In Stock

$ 219.00 USD

Add to Wish List

Qty

$ 219.00 USD

Add to Wish List

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling! Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway! Features: Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Looks great under the hood Cleanable and reusable filter Made in the USA *Not for sale or use in the state of California.

Show More Show Less

URO Parts Crankcase Breather Hose - 11127584128

2X Entries Into Our F80 M3 Sweepstakes

T#:29002180

Part#: 11127584128

In Stock

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

This hose connects to the PCV on your vehicle's valve cover. Constructed of brittle plastic, this component is commonly broken. Replace this hose to resolve diagnostic trouble codes or lean/rich running conditions.

Features & Benefits:

Guaranteed fitment Replacement of failed OE hose instantly restores crankcase breather functionality for proper control of hydrocarbon emissions High-quality materials resist cracking and splitting due to engine heat and oil vapor 24-Month Unlimited Mileage Warranty URO Parts offers more than 8,000 high-quality spare parts, many of which are specifically designed to replace factory BMW components. Their business was founded on the premise of producing parts that adhere to the highest standards of precision, materials, and workmanship. Each part is closely evaluated by a team of industry professionals to determine how to offer the best blend of durability, function, and price. If you're looking for quality replacement components at a reasonable price, look no further than URO Parts.

Show More Show Less

BMS Aluminum Performance Chargepipe w/ Tial BOV & Flange - N54 ...

Not for sale or use in the state of California.

T#:556772

Part#: BMS-N54-CP-WBOV

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Tired of your factory plastic charge pipe blowing off or ripping apart under boost? Upgrade your flimsy OEM unit to our heavy-duty aluminum replacement. Designed by Burger Motorsports, Inc and manufactured overseas our replacement charge pipe upgrade features all-aluminum construction, high quality matte black finish, CNC machined flanges, OEM style mounting hardware for a direct fit, and a lifetime warranty. Because we use the OEM mounting system, unlike other charge pipe solutions, this charge pipe installs in minutes, retains all emissions fittings, and is 100% reversible. Includes two 1/8" NPT bungs with optimal 180 degree placement. Lifetime warranty. The blow-off valve flange on the BOV charge pipes are for TIAL Q 50mm or Turbosmart (female tial flange). Installation requires charge pipe gaskets and charge pipe clips to be transferred over from the removed factory charge pipe. Replaces OEM BMW Charge-Air Duct part # 13717615026 Specs and Features: Aluminum Construction Black Powder Coating 3" Diameter Tial BOV Flange and BOV included! CNC Machined Throttle Body Flange Dual 1/8" NPT Bungs High Pressure T-Bolt Clamps All Required Installation Hardware *Not for sale or use in the state of California.

Show More Show Less

VRSF Chargepipe Upgrade Kit - N54

We Price Match - Give Us A Call or Chat!

T#:584878

Part#: 10901020B

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.

Show More Show Less

Universal 10AN ORB To 3/8" Barb

T#:31522993

Part#: RAD20-0530

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

BMS N54 3.0L BOV Vacuum Adapter

T#:589529

Part#: N54BOVVACADPT2

In Stock

$ 79.00 USD

Add to Wish List

Qty

$ 79.00 USD

Add to Wish List

Upgrade your BMW's performance with the BMS N54 BOV Vacuum Adapter, a plug-and-play solution that enhances engine vacuum functionality. Easily attachable to the throttle body/brake booster vacuum line, this adapter provides two extra 1/8" NPT vacuum ports, offering versatile applications like replacing vacuum lines to diverter valves, connecting boost gauges, and more.

Quick and hassle-free installation
Two additional 1/8" NPT vacuum ports for multiple applications
Ideal for replacing engine vacuum lines to diverter valves
Enables a larger diameter boost reference to aftermarket BOV
Perfect for adding extra boost gauges and accessories
CNC machined for precise fit and durability
Dual internal O-rings and retaining clip for a secure, factory-like seal
Basic kit includes adapter, two 1/8" NPT caps, and one 1/8" vacuum nipple
BOV kit adds two push lock fittings and 1/4" line for Tial BOV installation
Made in the USA for quality assurance

Enhance your BMW's performance and functionality with the BMS N54 BOV Vacuum Adapter – a versatile, plug-and-play solution made in the USA.

Show More Show Less

Replacement N55 Performance Filter - Red

T#:38890883

Part#: BMSREPAFNFFR

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants

Show More Show Less

Vargas PCV Cover & Valve Upgrade - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51813319

Part#: VTT-N54-UPCVVK

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Maintain peak engine efficiency and stop annoying oil smoke with the VTT N54 Upgraded PCV Valve Complete Kit.

Vargas Cold Side Charge Pipe - N54 - Tial/Turbosmart Raceport BOV Fla...

2X Entries Into Our F80 M3 Sweepstakes

T#:641135

Part#: VTT-CHARGEPIPE-1

Ships in 7 Business Days

$ 103.99 USD

Add to Wish List

Qty

$ 103.99 USD

Add to Wish List

When upgrading and N54 we suggesting running a true BOV like a Turbosmart Raceport. This cold side charge pipe allows you to do that while getting rid of the plastic charge pipe that is prone to cracking and plastic diverter valves. Charge pipe is made from high-quality aluminum, tig welded, has two 1/8' NPT meth bungs, and a flange to fit Turbosmart Raceport or Tial BOV. Kit includes: Charge pipe 45-degree silicone adapter hose 2 1/8' NPT plugs Two T-bolt clamps

Show More Show Less

VRSF Outlet Charge Pipe Coupler for 10901030, 10901035, 10901040 & 10...

We Price Match - Give Us A Call or Chat!

T#:35154904

Part#: 205470

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

VRSF Outlet Charge Pipe Coupler for 10901030, 10901035, 10901040 & 10901045 is designed to ensure a secure, leak-free connection for turbocharged BMW engines. This premium coupler is crafted to fit seamlessly with VRSF outlet charge pipes, enhancing the reliability and performance of your BMW's turbo system. Made from high-quality materials, it withstands extreme boost pressures and temperatures, making it ideal for stock and high-performance applications. Available through Turner Motorsport, this coupler is a perfect upgrade for BMW enthusiasts seeking durability and optimal engine efficiency.

Benefits:

Provides a reliable, leak-free seal for VRSF charge pipes and turbo outlets
Engineered for compatibility with 10901030, 10901035, 10901040 & 10901045 charge pipes
Built with durable, heat-resistant materials to handle high boost pressures
Enhances turbo efficiency by eliminating boost leaks and ensuring consistent airflow
Precision-fit design allows for straightforward installation and optimal performance
Ideal for both stock and modified BMW turbocharged systems

The VRSF Outlet Charge Pipe Coupler for 10901030, 10901035, 10901040 & 10901045 is a must-have component for BMW owners aiming to maintain reliability and boost performance in their vehicle's turbocharging system.

Show More Show Less

VRSF Lower Charge Pipe Upgrade - E8X/E9X N45 N55

We Price Match - Give Us A Call or Chat! Designed to work with VRSF intercooler

T#:585210

Part#: 305450

In Stock

$ 72.99 USD

Add to Wish List

Qty

$ 72.99 USD

Add to Wish List

The OEM plastic lower charge pipe is very restrictive and prone to failure under stock boost levels. VRSF solves this issue with a 2.5" mandrel bent aluminum replacement that increases flow, and is much more reliable. This upgrade will improve the turbo spool of your N54 or N55 engine, and enables you to safely tune for more boost.

Show More Show Less

MAP Sensor (Manifold Absolute Pressure) - E9X 335I N54, N63 engines ...

T#:14978

Part#: 13627585492

In Stock

$ 162.95 USD

Add to Wish List

Qty

$ 162.95 USD

Add to Wish List

This is the Genuine BMW intake manifold pressure sensor for cars with the N54 or N63 engine. This sensor can be damaged by built up debris or grime. 6 cylinder N54 cars take 1 sensor, and BMW's with the N63 V8 use 2 sensors. Sensors are sold individually.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 135i 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
2010-2011 F07 BMW 550i GT, 550i xDrive GT
2011 F10 BMW 550i 550i xDrive
2011 F12 BMW 650i 650i xDrive
2009-2011 F01 BMW 740i 740li 740li xDrive 750i 750li 750i xDrive 750li xDrive
2009-+ F01 BMW 760li
2010-2013 E70 BMW X5 xDrive50i, X5M
2008-2010 E71 BMW X6 xDrive35i
2008+ E71 BMW X6 xDrive50i X6M
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is

Show More Show Less

VRSF Relocated Silicone High Flow Inlet Intake Kit - E9X/E82 N54 ...

We Price Match - Give Us A Call or Chat!

T#:585030

Part#: 10901062

In Stock

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Replace your restrictive OEM intake with this 2" Relocated Silicone High Flow Inlet Intake Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF passenger side inlet upgrade kit relocates your coolant reservoir to the driver side while providing a more direct, high flowing intake path for your turbos.

Show More Show Less

Billet Check Valve - 10 Barb

2X Entries Into Our F80 M3 Sweepstakes

T#:597641

Part#: VTT-CHECK-2

Ships in 3 Business Days

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

Adjusting Unit For Intake Manifold (disa Valve) - E9x E82 E60 X3 X5 ...

T#:19291

Part#: 11617579114

Ships in 3 Business Days

6% off MSRP $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD

Add to Wish List

Qty

6% off MSRP

$ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD

Add to Wish List

The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps a engine fault code light. This adjusting unit fits cars with N52 or N51 engine - not N52N models. This is the larger of the 2 DISA Valves on this motor. The other DISA valve is part number 11617560538

This item fits the following BMWs:
2008+ E82 BMW 128i - N51 engine
2006-2011 E90 BMW 328i 328xi 328i xDrive (N51) - 330i 330xi - Sedan
2006-2012 E91 BMW 328i 328xi 328i xDrive (N51)- Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive (N51)- Coupe
2007-2013 E93 BMW 328i (N51) - Convertible
2004-2010 E60 BMW 530i (N52) 530xi
2011+ F10 BMW 528i
2007-2010 E83 BMW 3.0si
2011 F25 BMW X3 xDrive28i
2007-2013 E70 BMW X5 3.0si
2003-2008 E85 BMW Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

Genuine BMW Vacuum Hose

T#:37015

Part#: 11657588771

In Stock

4% off MSRP $ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

4% off MSRP

$ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Vacuum Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30

Fits BMW Engines including:
N55

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

2" Aluminum Turbo Outlet Boost Pipe - V-Band

We Price Match - Give Us A Call or Chat!

T#:584929

Part#: 10901045

Back Ordered

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

N54 Boost Pipe upgrade kit with V-band Turbo Outlet Style - Also referred to as a "Hot Side Charge Pipe"

Flapper Delete Fitting - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557962

Part#: VTT-FLAPPER-DELE

Ships in 10 Business Days

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less