BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Bav Auto Upper DISA Valve for Intake Manifold - E9x E82 E60 X3 X5 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:639842

Part#: 11617560538

In Stock

Sale - Save 20% $ 177.99

This product was last offered at the strikethrough price on
05-03-2026

$ 142.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 177.99

This product was last offered at the strikethrough price on
05-03-2026

$ 142.39 USD

Add to Wish List

The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps an engine fault code light. This adjusting unit fits cars with N52 or N51 engine - not N52N models. This is the smaller of the 2 DISA Valves on this motor, it is considered the "Upper Disa valve". The lower DISA valve is part number 11617579114 From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

2X Entries Into Our F80 M3 Sweepstakes

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

Black Market Parts Extended Intake Manifold Studs - N54/N55/S55 ...

T#:5229478

Part#: 501-0018

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The Black Market Parts Extended Intake Manifold Studs are the same great product that come with our N54/N55/S55 Port Injection Kit. These studs are compatible with any port injection kit and can even be used with stock manifolds. Each stud is designed like factory and is removed/installed with the same e-torx socket the factory 7mm studs are removed with so no switching tools or specialty stud installers needed.

Show More Show Less

Precision Raceworks 2.5" Replacement Cone Air Filters - Pair of Filte...

T#:38229120

Part#: 622-0136

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

The Precision Raceworks Replacement Air Filters are a perfect choice when looking to replace your dirty or damaged PR inlet filters.

Dinan High Flow Drop-in Replacement Air Filter - BMW E82/88 E9X N52 3...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:18236085

Part#: D401-0036

In Stock

11% off MSRP $ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

11% off MSRP

$ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

BMW N51 N52 3.0L Dinan High Flow Drop-in Replacement Air Filter is designed to enhance engine performance while reducing maintenance costs. Turner Motorsport provides this high-flow, washable air filter that improves air intake efficiency, allowing your engine to breathe better and generate more power without additional strain. This filter is an excellent choice for those who want performance gains without committing to a full intake system upgrade.

Enhanced Airflow: Increases engine performance by allowing more air to enter the engine, resulting in improved power output.
Washable and Reusable: Reduces long-term maintenance costs by providing a durable filter that can be cleaned and reused.
Easy Installation: Drop-in replacement design makes it simple to install without modifications.
Improved Efficiency: Helps the engine work more efficiently, potentially leading to better fuel economy.

This Dinan air filter is a cost-effective solution for boosting your BMW's performance while maintaining reliability.

Show More Show Less

Precision Raceworks Phenolic Spacer - BMP Manifold 1/2" - N54/N55/S55...

T#:5229488

Part#: 501-0081

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

The Precision Raceworks Phenolic Spacer is made in the USA from premium fiber impregnated phenolic material. With a Rockwell Hardness of 100 and a conductivity rating of 2.03 it is the perfect material for insulating between heat generating parts such as the cylinder head and other parts you wish to stay cool like the intake manifold. A phenolic spacer works by reducing heat transfer from the cylinder head to the manifold which results in reduction of intake air temperature, allowing for cooler air to enter the cylinders which is more dense and reduces chance of detonation in the cylinder. Our 1/2" phenolic spacer not only provides a thermal insulation between the cylinder head and intake plenum. It has also been designed to make use of factory O-Rings rather than messy gasket maker adhesive to ensure an air tight seal each and every time along with easy installation and removal.

Show More Show Less

N52 3-Stage Intake Manifold - BMW E82/88 E9X N52 3.0L

Common upgrade from the 330i model - additional parts needed, see product description

10X Entries Into Our F80 M3 Sweepstakes

T#:19792191

Part#: 11617559523

In Stock

Sale - Save 20% $ 474.99

This product was last offered at the strikethrough price on
05-03-2026

$ 379.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 474.99

This product was last offered at the strikethrough price on
05-03-2026

$ 379.99 USD

Add to Wish List

Replacement 3-Stage intake manifold for your N52-powered BMW.

Vargas PCV Cover & Valve Upgrade - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51813319

Part#: VTT-N54-UPCVVK

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Maintain peak engine efficiency and stop annoying oil smoke with the VTT N54 Upgraded PCV Valve Complete Kit.

Universal 10AN ORB To 3/8" Barb

T#:31522993

Part#: RAD20-0530

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Vargas Cold Side Charge Pipe - N54 - Tial/Turbosmart Raceport BOV Fla...

2X Entries Into Our F80 M3 Sweepstakes

T#:641135

Part#: VTT-CHARGEPIPE-1

Ships in 7 Business Days

$ 103.99 USD

Add to Wish List

Qty

$ 103.99 USD

Add to Wish List

When upgrading and N54 we suggesting running a true BOV like a Turbosmart Raceport. This cold side charge pipe allows you to do that while getting rid of the plastic charge pipe that is prone to cracking and plastic diverter valves. Charge pipe is made from high-quality aluminum, tig welded, has two 1/8' NPT meth bungs, and a flange to fit Turbosmart Raceport or Tial BOV. Kit includes: Charge pipe 45-degree silicone adapter hose 2 1/8' NPT plugs Two T-bolt clamps

Show More Show Less

Billet Check Valve - 10 Barb

2X Entries Into Our F80 M3 Sweepstakes

T#:597641

Part#: VTT-CHECK-2

Ships in 3 Business Days

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

BMW E8X E9X Turbo Inlet Flange Adapter Kit 1.75" To 2"

T#:21637194

Part#: 501-0026

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

BMW E8X E9X Turbo Inlet Flange Adapter Kit 1.75" To 2" by Turner Motorsport is designed to facilitate a seamless upgrade for your turbo system. This precision adapter kit allows BMW E9X and E8X owners to run 2" relocated inlets on stock turbos with confidence, ensuring a secure fit without the risk of the inlets slipping off.

Secure Fit: Prevents inlets from slipping off the turbo flange, ensuring a tight and reliable connection.
Precision Engineering: Made from high-quality materials for a perfect fit and enhanced performance.
Easy Upgrade: Allows for easy transition from 1.75" to 2" turbo inlets, providing improved airflow and performance.
Durable Construction: Built to withstand high pressures and temperatures, ensuring long-term reliability.
Compatible Design: Specifically designed for BMW E8X and E9X models, making it a perfect fit for your vehicle.

Show More Show Less

Precision Raceworks Relocated Inlet Kit - Upgraded Turbos (2") - BMW ...

T#:38229118

Part#: 601-0027

Ships in 10 Business Days

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

The Precision Raceworks N54 Relocated Inlet Kit is the highest flowing and highest quality inlet system available for the N54 on the market! Since our development, many others have followed making silicone inlet systems. Don’t be fooled into thinking all kits are the same, our design features wire inlayed high temp silicone to prevent melting or collapsing due to heat and vacuum of the turbo. Best of all our kit does not require you to butcher your factory harness to relocate the coolant expansion tank. Our kit includes a plug-and-play extension harness featuring OEM weatherproof connectors for easy installation. *NOT COMPATIBLE WITH RHD VEHICLES

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Flapper Delete Fitting - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557962

Part#: VTT-FLAPPER-DELE

Ships in 10 Business Days

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

Billet 1/2" Check Valve - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557954

Part#: VTT-CHECK-1

Ships in 1 Business Day

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is a 1/2" (fits -8AN hos perfectly as well) CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run the vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

Dinan High Flow Drop-in Replacement Air Filter - E8X/E6X/E89/E9X - N5...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:18236084

Part#: D401-0035

Ships on Sep 24, 2026

51% off MSRP $ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Qty

51% off MSRP

$ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Reduce your maintenance costs and increase your performance with Dinan's high-flow, washable, drop-in air filter! Using better breathing materials lets your engine make more power while not working as hard, giving you a reliable bump in engine performance! The air filters are a great alternative if a full intake system just is not possible at the moment, but no worries, Dinan has you covered!

Show More Show Less

High Flow Aluminum Intake

2X Entries Into Our F80 M3 Sweepstakes

T#:5788168

Part#: VTT-N55-E-INT

Ships in 7 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

Get rid of the restrictive stock plastic intake on your E-Series N55 powered BMW, and replace it with our 2.5 full flow aluminum intake. This is a MUST when upgrading turbos, or trying to get the most from your stock turbo. Constructed of high-grade aluminum, and powder coated with a very durable gloss black finish this upgrade looks as good as it performs. Install is easy, takes about 45minutes-1.5 hours depending on your skill level. Kit included: 1 – VTT Aluminum Intake pipe 2 – O-rings

Show More Show Less

N54 Charge Pipe With BOV

2X Entries Into Our F80 M3 Sweepstakes

T#:594513

Part#: VTT-CHARGEPIPE-2

Ships in 10 Business Days

$ 409.99 USD

Add to Wish List

Qty

$ 409.99 USD

Add to Wish List

Whenever upgrading your N54 Vargas suggest going to a true BOV like a Turbosmart Raceport. This cold side charge pipe allows you to do that while getting rid of the prone to cracking plastic charge pipe, and plastic DV’s. *Door Buster Special - New Product* The charge pipe is made from high-quality aluminum, tig welded, has two 1/8' NPT meth bungs, and a flange to fit Turbosmart Raceport The Raceport will include the proper orange spring pre-installed. The Charge pipe kit includes Kit includes: Charge pipe 45-degree silicone adapter hose 2 1/8″ NPT plugs Two T-bolt clamps Two DV block off caps (Depends on Model) Turbosmart Raceport BOV (optional) 24″ Of Vacuum line

Show More Show Less

N55 TurboSmart KOMPACT EM DV - Dual Port

2X Entries Into Our F80 M3 Sweepstakes

T#:7734722

Part#: N55TURBOSMARTDV

Ships in 10 Business Days

$ 338.99 USD

Add to Wish List

Qty

$ 338.99 USD

Add to Wish List

Upgrade your BMW N55's turbocharger performance with the award-winning Kompact EM series Diverter Valves from VTT. These plug-and-play valves are the world’s first, offering seamless installation without adapters or extra assembly. By retaining OE control, they ensure optimal operation while minimizing leakage and enhancing turbocharger response. Ideal for owners of hybrid or larger flowing turbos, these valves boast superior thermal performance, providing a must-have solution for maximizing boost without stressing the turbocharger.

Seamless plug-and-play installation
Minimizes leakage for enhanced turbocharger performance
Retains OE control for optimal operation
Superior thermal performance to maximize boost without stressing the turbocharger

Show More Show Less

Replacement Filter for Carbon Fiber Intake

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Filter color may vary between red and blue

T#:567379

Part#: D401-0016

Ships in 7 Business Days

11% off MSRP $ 107.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 95.99 USD

Add to Wish List

Qty

11% off MSRP

$ 107.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 95.99 USD

Add to Wish List

This is a replacement air filter for your Dinan air intake. Replace your dirty, damaged, or lost filter to restore the performance you expect of Dinan and your BMW. Replace your dirty, damaged, or lost filter For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Show More Show Less

BMC Performance Air Filter - E90, E91, E92, E93, E84

T#:398704

Part#: FB630/20

In Stock at Vendor

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Vargas N54 Billet Center Feed Intake Manifold - Customize Your Own! ...

2X Entries Into Our F80 M3 Sweepstakes

T#:6061725

Part#: VTT-N54ITKM

Ships in 10 Business Days

Starting at $ 1,322.99 USD

Add to Wish List

Starting at $ 1,322.99 USD

Add to Wish List

VTT is proud to release their center feed N54 intake manifold. Vargas performed CAE/Multiphysics simulation for both steady and unsteady state operating conditions in order to bring real-world performance benefits to your N54 build. This manifold is stronger, outflows the OEM manifold, and installs just as easily as your stock piece (no custom charge pipe or throttle body harness required). Available in five different finishes! Features: Full billet production using aircraft 6061-T6. NOT sheet metal Can be run Direct Injection only, or allows for EASY addition of Port Injection to any N54 engine with no plates, or bad injection angles DI Kit Contents: Pi Block off plugs to seal the ports for a compact design, no blocked off fuel rails All fittings, or plugs for Vacuum/Boost ports PI Kit Contents: Complete fuel rail with required fittings All hose connections required to run fuel lines using genuine Parker 801 hose and AN fittings All fittings, or plugs for Vacuum/boost ports Optional Injector Choice DI only completely removes the fuel rail for a compact look. Flow optimized for increased horsepower at top of the RPM band A variety of ports on the bottom, which allow you to run any of modular setups for PCV, vacuum needs A significant advantage in flow over stock manifold at top of the RPM range Weight is 13.6 lbs. With the Fuel Rail Option for additional injectors provided by DeatschWerks (550cc or 1000cc) Controller for port injection available separately

Show More Show Less

BMC Performance Air Filter - E90, E91, E92, E93, E89, E60, E61 ...

T#:398689

Part#: FB494/20

In Stock at Vendor

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Dual Cone Filters

2X Entries Into Our F80 M3 Sweepstakes

T#:393982

Part#: DUALCONE

Ships in 10 Business Days

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

Tired of the sound and performance out of your stock N54 airbox? Look no further, Vargas Turbo Technologies has the solution, these quick, easily installable dual cone filters will not only increase air flow, but also sound and performance!

Show More Show Less

VTT CNC ORB Plug - -10AN

2X Entries Into Our F80 M3 Sweepstakes

T#:642075

Part#: VTT-10ORB

Ships in 10 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

FTP Motorsport Lower Charge Pipe - E9X, E8X N54/N55

T#:582199

Part#: SG71414

Special Order: No Guaranteed ETA

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

This is a replacement boost pipe that is made from solid aluminum so it won't break, come loose or deteriorate over time. Connects intercooler to upper charge pipe. Features: Increased throttle response and decreases turbo lag Powder-coated black aluminum piping Throttle body matched 3 "piping Billet CNC OEM TB Flange for a leak-free connection Includes everything necessary to upgrade from the factory charge pipe

Show More Show Less

FTP Motorsport Throttle Body Spacer - E82/88 E9X N54 N55

T#:586847

Part#: SG71344

Special Order: No Guaranteed ETA

$ 100.00 USD

Add to Wish List

Qty

$ 100.00 USD

Add to Wish List

This is a billet aluminum throttle body spacer for your N54/N55 engine. Features: Increase MPG Improved throttle response No annoying whistle Increase in horsepower and torque High-quality billet aluminum construction

Show More Show Less

FTP Motorsport Charge Pipe - E9X E8X (N55)

T#:583183

Part#: SG71312

Special Order: No Guaranteed ETA

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. The FTP BMW N55 Charge Pipe both increases flow and improves the reliability of your twin turbo BMW. The 3" mandrel bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine. Increased Flow Direct OEM Replacement 3in Mandrel-Bent Aluminum Construction 4-Play Silicon Couplers

Show More Show Less

FTP Motorsport Recirculating Blow Off Valve Kit - E82/88 E9X N54 ...

T#:582198

Part#: SG71393

Special Order: No Guaranteed ETA

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

This is a set of upgraded blow off valves for the N54 engine. The recirculating design uses OE DV design to ensure proper emissions and no engine lights. Features: Quicker responding boost with higher flowing valve Increase in horsepower and torque Eliminates boost spikes and leaks Overall accelerations improvements Capable of handling a wider range of boost pressure Easy bolt-on installation Made from CNC machined T6-6061 billet aluminum alloy Fully tunable for boost capacity and response

Show More Show Less

FTP Motorsport Dynamic Air Scoops - E82/88

T#:582200

Part#: SG71372

Special Order: No Guaranteed ETA

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

These scoops will increase the air volume that enters the engine thus providing a denser air charge. These pair excellently with an aftermarket intake system or a high-flow filter.

BMC Performance Air Filter - E82/8 E9X N52

T#:397417

Part#: FB518/08

Back Ordered

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

FTP Motorsport Boost Pipe - E9X E8X N55

T#:582436

Part#: SG71312-BP

Special Order: No Guaranteed ETA

$ 220.00

This product was last offered at the strikethrough price on
06-24-2026

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

Replace your failure prone factory BMW boost pipe with an FTP Motorsport aluminum piece. Stronger and more reliable than the OEM plastic piece that connects the intercooler to the turbo.

FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...

T#:586830

Part#: SG71312FG-9

Special Order: No Guaranteed ETA

$ 24.95 USD

Add to Wish List

Qty

$ 24.95 USD

Add to Wish List

Replacement Intake pipe C-clip and o-ring.

VTT Billet N54 Intake Manifold - E8X, E9X N54

2X Entries Into Our F80 M3 Sweepstakes

T#:590218

Part#: VTT-N54-INTAKE

Back Ordered

Starting at $ 2,030.99 USD

Add to Wish List

Starting at $ 2,030.99 USD

Add to Wish List

This VTT intake manifold delivers with proven design and flawless execution.

FTP Motorsport PCV Valve Upgraded Replacement - N54

T#:583063

Part#: SG84036

Special Order: No Guaranteed ETA

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

The OEM plastic PCV valve does not hold pressure well even when brand new. What this means is that when the turbochargers are making boost, pressurized air can become forced backwards through the valve and back into the crankcase. Depending on the condition of your PCV valve this can range from irritating to dangerous as a pressurized case can cause all sorts of issues. Additionally, if your valve cover is cracked due to age or has a bad gasket you are more than likely experiencing a pressure leak either internally or externally. These two features can cause even a low-mileage N54 to run like a tired elephant, sometimes even unlocking a special bonus function known as "Limp Mode". The solution is to replace any failed components and upgrade the PCV valve to something more capable withstanding the abuse of a turbocharged environment. FTP Motorsport has you covered with this solid aluminum valve assembly. It is essentially the same thing that came in your car from the factory, made out of aluminum. The internal components have also been made to fit tighter and outlast the life of an off the shelf replacement. No, this won't be the very last PCV valve you buy, but it will most certainly alleviate a lot of headaches common to N54 owners. And if you're tuned, big twin or single swapped you need one of these yesterday.

Show More Show Less

FTP High Flow Air Filter - N55 E8x/E9x

T#:5788169

Part#: GN55

Special Order: No Guaranteed ETA

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow

Show More Show Less

BMW N54 Intercooler Pipe O-Ring - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:22361058

Part#: 13717568030

In Stock

Sale - Save 20% $ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.39 USD

Add to Wish List

Genuine BMW Air Box Bump Stop Mount - 13717542860

T#:399461

Part#: 13717542860

In Stock

Sale - Save 35% $ 6.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4.51 USD

Add to Wish List

Qty

Sale - Save 35%

$ 6.99

This product was last offered at the strikethrough price on
05-02-2026

$ 4.51 USD

Add to Wish List

This mounts the air box to the inside of the engine bay, preventing it from shaking and/or bouncing�around.

Genuine BMW Bump Stop
This item fits the following BMW Chassis:
E82 1M Coupe,E85 Z4M,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F02,F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Fits BMW Engines including:
N52,N52N,N54,N54T,N55,S54,S55
�

Show More Show Less

Precision Raceworks OE-Spec Intake Manifold O-Rings - 6 Pack - BMW N5...

T#:38229122

Part#: 501-0001

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

The Black Market Parts OE-Spec Intake Manifold O-Rings kit is made with Viton capable of withstanding all fuels (including e85) as well as oils. These o-rings are made to OE specifications and are a direct replacement for the seals found in your factory intake manifold. These o-rings are also used in other BMP products such as our N54/N55 Port Injection Kit, S55 Port Injection kit, N54 Performance Intake Manifold, and N55 Performance Intake Manifold.

Show More Show Less

VTT Single Piece Silicone Cold Side Charge Pipe - Red - BMW E82/E88 E...

2X Entries Into Our F80 M3 Sweepstakes

T#:35154933

Part#: VTT-SILICONE-CP-

Ships in 10 Business Days

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

VTT is proud to offer the very best Cold Side charge pipe solution for the BMW E Series N54 platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipe rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. Another huge benefit is only TWO connections which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off.

This N54 pipe has a flange installed to support a Turbosmart BOV.

This is the EASIEST N54 charge pipe on the market to install hands down. Install takes about half an hour even if you are inexperienced with working on your own car, can take as little as 15-20 minutes if you have had it apart a few times.

The kit includes:

VTT Cold Side Silicone Charge pipe

2 VTT Branded CNC adapters to mount the map sensor, and a methanol bung

1 VTT Branded CNC adapters for the TB inlet

2 VTT branded T-Bolt Clamps

1 1/8 NPT port is included in the charge pipe for methanol

Show More Show Less

PCV Adapter Fitting N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557961

Part#: VTT-PCV-ADAPTER

Ships in 10 Business Days

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is the adapter fitting that is required to convert your N54 to external PCV if you want to keep your crankcase under vacuum at idle, and anytime you have a vacuum condition in your intake manifold. They are made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip.

This must be used in conjunction with the Vargas billet check valve, and PCV delete fitting or requires plugging of the intake PCV ports. Installs inline on the throttle body, and adds a -8AN male to adapt to a catch cans, or any custom set up.

Made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

Vargas Black TiAL BOV Spring - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51813316

Part#: VTT-TIAL-BLACK

Ships in 10 Business Days

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

Maintain the peak performance of your forced induction system with the VTT Black TiAL BOV Spring.

Vargas Aluminum Turbo Outlet - Hose Barb - BMW E8X 135i, E82 1M, E6X ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51883668

Part#: VTT-ALUMO-1HB

Ships in 10 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

The Vargas Aluminum Turbo Outlet is the definitive solution for BMW owners looking to eliminate the weak points of the stock plastic and rubber charge tract.

Vargas PCV Cover Upgrade - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51813330

Part#: VTT-N54-UPCVC

Ships in 10 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Maintain the health of your BMW’s engine with the VTT Upgraded Billet PCV Cover.

Vargas Low Side PCV Fitting - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778126

Part#: VTT-OCC-1-LOW-SI

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

The Vargas Low Side PCV Fitting is the essential upgrade for BMW owners looking to optimize their crankcase ventilation without replacing the factory valve cover.

Precision Raceworks Relocated Inlet Kit - Stock Turbos (1.75") - BMW ...

T#:38229117

Part#: 622-0131

Ships in 6 Business Days

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

The Precision Raceworks N54 Relocated Inlet Kit is the highest flowing and highest quality inlet system available for the N54 on the market! Since our development, many others have followed making silicone inlet systems. Don’t be fooled into thinking all kits are the same, our design features wire inlayed high temp silicone to prevent melting or collapsing due to heat and vacuum of the turbo. Best of all our kit does not require you to butcher your factory harness to relocate the coolant expansion tank. Our kit includes a plug-and-play extension harness featuring OEM weatherproof connectors for easy installation. *NOT COMPATIBLE WITH RHD VEHICLES

Show More Show Less

Black Walnut Shell 20/30 Blast Media

10X Entries Into Our F80 M3 Sweepstakes

T#:22690744

Part#: B1100051

Ships in 8 Business Days

Sale - Save 20% $ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD

Add to Wish List

This blast media makes DIY carbon cleaning a breeze!

Precision Raceworks T-Map Extension Harness - BMW E9x/E8x N54 3.0L ...

T#:47679241

Part#: 201-0133

Ships in 9 Business Days

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

The Precision Raceworks BMW E9x/E8x T-Map Extension Harness is an excellent way to extend the length of your existing harness for the charge pipe T-Map sensor without having to cut and splice any wires. Additionally, this harness adapts your OEM map sensor wire to a 3.5 bar map sensor connector. An absolute must for Forward Facing Manifolds and Charge Pipes from Precision Raceworks or any other company offering a pipe that relocates the map sensor, resulting in the need to extend the harness.

Show More Show Less

Precision Raceworks 2.5" Replacement Cone Air Filter - Single Filter ...

T#:38229119

Part#: 201-0092

Ships in 9 Business Days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The Precision Raceworks Replacement Air Filters are a perfect choice when looking to replace your dirty or damaged PR inlet filters.

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results