The combination of N52 and muffler delete surpasses all sound expectations from a small 1 series! Impressive direct-fit solution. With this new muffler/res delete you can completely transform the sound and driving experience of your 128. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage! What sounds better than an in-line six-cylinder paired with a race-inspired exhaust setup, the answer is nothing. You have a nimble chassis fitted with an engine that provides more than enough power for spirited street driving or even taking to the track, if the exhaust is still factory you do not know what you are missing out on.

The ECS N52 Muffler & Resonator Delete removes the heavy, restrictive factory muffler and replaces it with a lighter weight, high flow, T304 stainless steel 3.0" exhaust tubing. This exhaust adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. This upgrade creates a noticeable increase in exhaust sound, without adding significant drone at cruising speeds. As an added bonus, the ECS muffler delete shaves off about 16 lbs, weighing in at only 22 lbs. OEM units out of the 128 weigh in at around 38lb, a difference you will fully notice when upgrading your exhaust.

Features and Benefits:

Replace the factory muffler and resonator for a race-inspired straight 6-cylinder sound
Large radius bends for maximum exhaust gas flow
16lb weight reduction (Factory 38lb, ECS 22lb)
Fits in the factory exhaust hanger locations
Installation instructions featuring locations for removing your factory exhaust
Design:

In-house designed and engineered rear Muffler & Resonator Delete is made of T304 stainless steel, 1.25mm wall thickness, CNC mandrel bent 3.0" tubing for straight-through exhaust gas routing
High-quality stainless steel
Barbed exhaust hangers tig welded into the factory location for direct fitment
Stainless steel accuseal exhaust clamps included for a leak-proof seal
Large radius bends throughout with smooth transitions for the best flow possible

Upgrade your vehicle's muffler affordably with the Magnaflow Universal Muffler, providing a solution to loud exhausts without breaking the bank. Crafted from 100% stainless steel, these mufflers are built to endure extreme conditions, ensuring durability and reliability.

Key Benefits:

• 100% stainless steel construction for robustness
• Lap-joint welding ensures solid build quality
• Free-flowing, straight-through design for enhanced performance
• Stainless mesh wrap and acoustical fiber fill deliver a smooth, deep tone
• Packed tightly for long-lasting performance without sound degradation

Features:

• 2.5'' Inlet and Outlet
• 14'' body length
• 20'' overall length
• May require welding/fabricating for fitting; not a direct fit for any specific car model

Free ground shipping!

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Complete transformation for your 1 series. Direct bolt on muffler delete for a rowdy sound and a new and improved aggressive diffuser to compliment the exhaust.

A full aesthetic and sound transformation that is a direct fit solution. Both the diffuser and muffler delete are a direct replacement for the factory unit that can be upgraded with hand tools, no cutting or modification necessary!

M-Sport Rear Diffuser Upgrade:

Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.

The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.

Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.

For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.

Features and advantages:

Transformative Enhances the rear aesthetic of the 1 Series Direct fit utilizing factory clip locations and hardware Available in Textured Matte Black and Gloss Black Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer Compatible with both E82 and E88 models equipped with the M-Sport Package

135 Muffler Delete:

Arguably THE BEST modification for your 135. No cutting necessary, Direct bolt-on for a complete transformation!

The combination of 135 and muffler delete surpasses all sound expectations and is suspiciously easy to install! An impressive direct-fit solution, with no cutting involved. With the new muffler delete you can transform the sound and driving experience of your 135. A simple installation that can be completed with hand tools allows you to take your car to the next level at home in your garage! At the rear of the car just below the back seats, there is a factory flange with two bolts, simply remove the two bolts and barb from the factory hanger and swap with the ECS Tuning muffler delete for a direct replacement. Its as simple as that! Check out the installation instructions for a list of tools you will need!

-- CLICK HERE FOR INSTALLATION INSTRUCTIONS --

The ECS muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, this muffler delete shaves off 23.0 lbs., weighing in at only 7.0 lbs compared to the OEM muffler at 30 lbs!

Features and benefits:

Enhanced exhaust tone Simple installation (with instructions!) 23lb weight savings! (Factory muffler 30 lbs, muffler delete 7 lbs!) Swivel tip adjustment capability ​ Good looking and durable 304 stainless steel construction Factory position exhaust hangers Dual staggered tip exhaust tips Installation and Support:

Installation is as easy as unbolting, placing into position, and reinstalling fasteners! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Product Development:

Our muffler delete was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, and rigorous long-term product testing.

Lightweight axle-back featuring an exotic exhaust note. Designed for the perfect blend of performance and functionality!

Prepare to give your 1 series the boost it deserves. Our cat-back exhaust was made to redefine the driving experience of your 135. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust- flow and tuned exhaust note, we are very excited to get these exhausts on 135's everywhere, don't wait!

Featured on the ECS Tuning YouTube Channel! - CLICK HERE FOR SOUND CLIPS! -

In crafting this exhaust system, the primary focus is on achieving the perfect balance of sound and comfort. We understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. The ECS exhaust for your 135 incorporates this balance, offering a strategic blend of sportiness and practicality. Drawing from extensive experience, particularly with N54 cars like the E9x series, ECS has engineered an exhaust packed with innovative features, compatible with both factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.

Prepare for a fresh new exhaust, things are about to get rowdy. This exhaust features twin 2.5" brushed pipes that slip fit and clamp onto your factory midpipes. The dual 2.5" mid-pipe adapter converges into a single 3" section heading toward the rear axle. The 3" exhaust section snakes through the rear section of the car making smooth dips and curves to make its way into a light-weight 3" turbo style muffler. Don't be fooled by the 135 muffler, the size is nothing but deceiving. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both volume and smooth frequency. Paired with the 3" muffler is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.

Features and Benefits:

Street/Motorsport inspiration
Enhanced exhaust note
Full exhaust replacement
36% lighter than stock!
Stock axle-back: 39lbs
ECS axle-back: 25lbs
Reduction in back pressure for increased throttle response, TQ, and HP
Dual 3.5" fitted exhaust tips
Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout
Dual 2.5" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:

2.5" mid-pipe adapters
3" Rear exhaust section
3.0" free-flowing muffler section for better sound, and performance
Clamps and Hardware for an OEM+ install
Optional 3.5" ECS exhaust tips