BMW Water Pumps for BMW 1 Series E82 (2008-2013)

This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:

• OEM VDO electric water pump, p/n 11517588885 or 11517632426
• OEM mounting screws for water pump (set of 3), p/n 11517602123
• OEM Behr thermostat, p/n 11537549476
• Original BMW connecting hose from thermostat to water pump, p/n 11537545665
• Original BMW hose clamps for hose (x 2)
  
• BUY AS A PACKAGE AND SAVE $$!
  
  The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.
  
  How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.
  
  This water pump package fits the following BMWs with the N54 engine:
  2007-2010 E60 BMW 535i 535xi 535i xDrive
  2008-2010 E82 BMW 135i
  2011-2012 E82 BMW 1M Coupe
  2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
  2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
  2007-2010 E93 BMW 335i - Convertible

Don't take your car's cooling system for granted. A waterpump failure can cost you an engine, which is why preventatively replacing your BMWs waterpump and refreshing the cooling system every 60,000 miles. The water pump is a weak point is the cooling system. Replacing your waterpump will go a long way for keeping your car on the road and operating properly. This water pump fits many 2006 and newer BMW 6 cylinder engines, specifically all the BMWs with the N51, N52, N53 engines. You will also need to purchase replacement aluminum screws Part #11510392553 

Pierburg pumps are some of the most trusted and widely used on the market. From fuel, water, air and vacuum Pierburg has you covered with OE quality and reliable performance year after year.

This water pump fits the following BMWs:
2008-20xx E82 128i
2006-2006 E90 325i sedan, 330i sedan, 325xi sedan, 330xi sedan
2007-2012 E90 328i sedan, 328xi sedan, 328i xDrive sedan
2007-2012 E92 328i coupe, 328xi coupe, 328i xDrive coupe
2007-2012 E93 328i Convertible
2006-2006 E60 525i, 525xi, 530i, 530xi
2007-2010 E60 528i, 528xi, 528i xDrive
2007-2010 E83 X3 3.0i X3 3.0si
2007-20xx E70 X5 3.0si X5 xDrive30i 
2006-2008 E85 Z4 3.0si
2009-20xx E89 Z4 sDrive30i

Genuine BMW Water Pump And Thermostat Kit is designed to address the common issue of water pump failure in BMW models around 80,000 miles. This comprehensive kit provides everything needed for a seamless water pump and thermostat replacement, ensuring your BMW continues to perform at its best without leaving you stranded.

This kit includes a Genuine BMW water pump, thermostat, coolant, and all necessary mounting hardware, offering a reliable solution to restore your engine's cooling system. Perfect for preventative maintenance, this Genuine BMW kit helps prevent overheating and ensures optimal engine performance.

• Genuine BMW parts for precise fitment and reliability
• Complete kit for water pump and thermostat replacement
• Helps prevent common water pump failures around 80,000 miles
• Includes all required mounting hardware for easy installation
• Enhances engine cooling efficiency and longevity

The N5X family of engines marked the start of a new era for BMW. The all-new aluminum block powerplants featured a host of technical upgrades, aiding in power output, reliability, and performance. Among these technological advances is an external electronic water pump, which removed load from the engine's accessory drive and allowed for advanced pulse-width-modulated (PWM) control.

From factory, the N52's electronic water pump is limited to a measly 200W output—strong enough for daily driving, but lacking in performance applications. Recognizing this shortcoming, ECS engineers set out to create a high-flow water pump upgrade that doesn't break the bank. Their high-quality adapter wiring harness and bracket allow you to install a 400W N54 water pump without any modification, an effortless, yet effective upgrade that doubles the output of the factory water pump!

By increasing coolant flow capacity, the 400W pump improves heat extraction from the cylinder head and engine block during high-load operation. This added thermal headroom is particularly beneficial for modified engines, sustained aggressive driving, track use, or operation in elevated ambient temperatures where the factory pump can operate near its limits. Improved circulation helps maintain more stable coolant temperatures and reduces the risk of localized hot spots.

Features & Benefits:

Upgrades to the more powerful 400W N54 water pump for increased coolant flow and improved engine cooling efficiency Sealed adaptor harness ensures secure connections and optimal operation under demanding conditions The N54 pump's higher power output offers longer-lasting, more effective cooling compared to the stock N52 pump Design:

40A fused power wire safely handles the increased power demands of the N54 pump, providing consistent and stable performance Sealed and robust construction, designed to withstand heat and moisture, ensuring reliability in even the most challenging environments Plug-and-play compatibility is designed for easy integration with the N52 engine and N54 water pump, minimizing installation time and complexity Kit Contents:

ECS N54 Water Pump Adapter Kit Conversion wiring harness Aluminum bracket Installation hardware Pierburg Full Aluminum Water Pump (11515A05704) Installation:

- Click HERE for Installation Instructions -

Turner Motorsport Water Pump Kit

When it comes to replacing your water pump, don't overlook the importance of aluminum retaining bolts. Turner Motorsport offers a convenient water pump kit that includes these essential bolts, ensuring a seamless and secure installation.

New Part Number: 11515A05704

BMW N54 N55 Water Pump ensures reliable cooling performance for your BMW's engine. This high-quality water pump is designed for late-model N54 and N55 engines, offering enhanced reliability and ease of service. Unlike older models, it does not require a gasket or o-ring, simplifying installation and maintenance. Replacing worn water pumps during routine cooling system services is crucial for maintaining optimal engine performance and preventing overheating issues.

• Enhanced reliability for peace of mind
• Easy installation and serviceability
• No need for gasket or o-ring
• Maintains optimal engine cooling efficiency
• Designed specifically for BMW N54 and N55 engines

Ensure your BMW's engine stays cool and performs efficiently with the BMW N54 N55 Water Pump.

A recommended replacement for the stock OE screws, these OEM VDO screws have been updated to a steel composition, making it so that thses bolts may be reused any number of times without any issues.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform