Fuel Pump for BMW 1 Series E82 (2008-2013)

Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...

T#:1331979

Part#: 601-0176

In Stock

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Bucketed Low-Pressure Fuel Pump Kit - Stage 2.5v2 - BMW E9X E8X ...

T#:1165728

Part#: 601-0177

In Stock

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 550whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Genuine BMW Sky Blue Relay - Multiple BMWs

T#:21328

Part#: 61366915327

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Commonly used in multiple BMWs, usually controlling fuel pump operation.

Genuine BMW Adapter

T#:199513

Part#: 12518638006

Ships in 2 Business Days

4% off MSRP $ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Qty

4% off MSRP

$ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Genuine BMW Adapter - Hmk
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E92,E93,F02,F06,F10,F12,F13,F15,F22,F25 X3,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N18,N20,N26,N55,N63N,S63N

Show More Show Less

Control Unit Fuel Pump - Priced Each

10X Entries Into Our F80 M3 Sweepstakes
This part must be coded to your vehicle

T#:19560854

Part#: 16147229173

In Stock

Sale - Save 20% $ 224.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 224.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.99 USD

Add to Wish List

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...

T#:5216002

Part#: 601-0110

In Stock

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 1000whp on 93 octane pump gas or 875whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~1000whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Precision Raceworks Universal Adjustable Fuel Pressure Regulator W/ 1...

T#:38195449

Part#: 501-0043

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.

Spool Performance Helix HPFP Overdrive Unit - N54

T#:1241393

Part#: SP-54HX-1

In Stock

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The N54/early n55 high-pressure pump is a very capable and over-engineered piece of hardware. They do a good job supplying fuel at high pressures at stock power levels. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in N54/early N55 fuel systems without the complexity of a secondary port injection system.

Show More Show Less

Precision Raceworks Bucketed High Performance Fuel Pump Kit - Stage 2...

T#:8169508

Part#: 601-0116

In Stock

$ 594.99 USD

Add to Wish List

Qty

$ 594.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85 and flow up to 3.9 liters per minute. The included Genuine Walbro 535 (F90000295) fuel pump is capable of flowing up to 350% more fuel than the factory fuel pump and is 100% E85 compliant. Precision Raceworks' Stage 2.5 V2 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 650whp (Rated for 550whp on 100% E85) and is ready to grow with you as your needs demand. Unlike other manufacturers, Precision Raceworks is the only company featuring a bucketed kit with a modular design. This means you can purchase their stage 3 pump module or Stage 3.5 module and upgrade the pump as your needs change. If you are looking for a 100% assembled drop-in-ready solution, this is the choice for you! **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Features & Specifications: Lock Ring Tool Included Pump flow 72psi (5bar): 1.0 GPM / 3.9 LPM Pump Weight: 3.98 lbs Horsepower Supported Pump Gas: 650 Horsepower Supported 100% E85: 550 Aftermarket EKP Required: No

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 3 - ...

T#:5215998

Part#: 601-0018

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, of supporting up to 1050whp on 93 octane pump gas or 875whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed! With an open expansion slot ready to use, just a simple Stage 3.5 or Stage 4 module is all you need to purchase to increase your fueling capabilities. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you. Stage 2 Specifications: Horsepower Supported Pump Gas: ~1050whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No *To reach the advertised ability of these fuel pumps use of the Precision Raceworks in-tank filter regulator assembly is required.

Show More Show Less

Genuine BMW High Pressure Fuel Injection Pump - N54 N55 135i, 335i, 5...

T#:360279

Part#: 13517616170

In Stock

$ 1,650.57 USD

Add to Wish List

Qty

$ 1,650.57 USD

Add to Wish List

This is the updated high-pressure fuel pump for BMW's with the N54 or N55 turbo engine. When doing any sort of repair or maintenance, there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence. Includes a $413.00 refundable core charge

Show More Show Less

Stage 1 Low Pressure Fuel Pump Complete Inline Upgrade

T#:403509

Part#: BMW-S1LPFP-CK

Ships in 2 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.

Spool Performance Helix HPFP Overdrive Unit - N55

T#:9642131

Part#: SP-54HX-1-N55

Ships in 4 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The early N55 high-pressure pump is a very capable and over-engineered piece of hardware. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in early N55 fuel systems without the complexity of a secondary port injection system.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...

T#:5215999

Part#: 601-0096

Ships in 9 Business Days

$ 519.99 USD

Add to Wish List

Qty

$ 519.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Black Market Parts Fuel Pump Expansion Modules - Stage 3 - BMW E9X E8...

T#:38195447

Part#: 601-0019

In Stock

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Black Magic Parts' (by Precision Raceworks) bucketless low pressure fuel pumps are designed for customers looking to run all blends of E85. The pump ships assembled with an OEM connector to plug into the factory fuel pump top hat making it quick and easy to install. Our Stage 3 bucketed module will add a 450 pump to your existing PR Stage 2 or 2.5 kit. This will include all necessary hardware and wiring to upgrade your pump to a stage 3 and support up to 1000whp* (Rated for 875whp on 100% E85)

Show More Show Less

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

T#:38161743

Part#: 622-0270

Ships on Sep 17, 2026

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit includes Precision Raceworks' 6 Bar static micro fuel regulator. This regulator is the simplest way to move your fuel pressure regulation to the engine bay, requiring no adjustment or vacuum lines.

Show More Show Less

BMW N54 3.0L Stage 2 LPFP Spool Performance Bucketless

T#:640946

Part#: SP-BM54FP-S2

In Stock

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

BMW N54 3.0L Stage 2 LPFP Spool Performance Bucketless is engineered by Spool Performance, a leading name in BMW forced induction, to deliver exceptional fuel delivery and power upgrades. Designed by a team of dedicated engineers, this high-quality component enhances your vehicle's fuel system with superior performance.

Increased Fuel Flow: Provides more than double the flow of a stock fuel pump, ensuring ample fuel delivery for high-performance applications.
E85 Capable: Fully compatible with E85 fuel, offering flexibility and efficiency.
Drop-In Replacement: Easily replaces the factory pump without additional modifications.
Future-Proof: Can be upgraded to Stage 3 for even greater performance as your needs evolve.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...

T#:1331984

Part#: 601-0062

In Stock

$ 424.99 USD

Add to Wish List

Qty

$ 424.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Black Market Parts (by Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2+ bucketless fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 575whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - ...

T#:1165729

Part#: 601-0017

In Stock

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 600whp on 93 octane pump gas or 550whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Genuine BMW Low Pressure Fuel Pump - E82/88 E9X

T#:19457

Part#: 16147163298

Ships in 3 Business Days

6% off MSRP $ 556.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 522.99 USD

Add to Wish List

Qty

6% off MSRP

$ 556.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 522.99 USD

Add to Wish List

Sputtering, no starts, or rough idle could be an indication of a failing or failed fuel pump. Replace yours with a Genuine BMW fuel pump to get your BMW running again for many years to come!

Genuine BMW Repair Kit, Fuel Pump/Fuel Level Sensor
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93

Fits BMW Engines including:
N20,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Fuel Pump Control Unit - E82 E88 E90 E91 E92 E70 E84 E93 ...

T#:194486

Part#: 16147407513

Ships in 3 Business Days

4% off MSRP $ 447.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 427.99 USD

Add to Wish List

Qty

4% off MSRP

$ 447.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 427.99 USD

Add to Wish List

Genuine BMW Control Unit For Fuel Pump -
This item fits the following BMW Chassis:
E71,E89 Z4

Fits BMW Engines including:
N20,N54,N54T,N55

Genuine BMW In-Tank Fuel Pump

T#:21733

Part#: 16147194207

Ships in 3 Business Days

6% off MSRP $ 505.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 475.99 USD

Add to Wish List

Qty

6% off MSRP

$ 505.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 475.99 USD

Add to Wish List

Genuine BMW Delivery Unit, Right -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N51

Precision Raceworks Bucketed Performance Fuel Pump - Stage 3.5 - BMW ...

T#:22130454

Part#: 601-0111

Ships in 10 Business Days

$ 943.99 USD

Add to Wish List

Qty

$ 943.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. Our Stage 3.5 bucketed fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts a Walbro 450 (F90000274) and a Walbro 525 (F90000285) which offers maximum flow without costly pump controllers. This pump can support up to 1,100whp* (Rated for 950whp on 100% E85) and is ready to grow with you as your needs demand. With a modular plug-and-play design, this kit can be upgraded with our Stage 3.5 or Stage 4 module and have everything you need to match your future horsepower goals. New Build (Fully Assembled) - If you prefer to have someone else do the work we are here for you. We offer 100% new builds please allow 2-3 business days for assembly. This option is great for the customer who plans to have a shop do the work. For about the same price you will pay in labor at the shop for assembly you get an already assembled unit ready to drop right in. So if you are looking for a 100% assembled drop in ready solution this is the choice for you! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. *To reach the advertised ability of these fuel pumps, the use of the Precision Raceworks In-Tank filter regulator assembly is required. See 601-0244 ** Some European Spec vehicles may require re-use of top hat due to differences in emissions requirements. Stage 3.5 Pump flow 72psi (5bar): 1.69 GPM / 6.4 LPM Pump Weight: 8.68 lbs Horsepower Supported Pump Gas: 1,100* Horsepower Supported 100% E85: 950* Aftermarket EKP Required: No

Show More Show Less

Black Market Parts Bucket-less Fuel Pump Bracket - BMW E9X E82/88 ...

T#:38195418

Part#: 501-0032

Ships on Sep 18, 2026

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

The Black Market Parts (by Precision Raceworks) Stage 2/3 Bucketless Fuel Pump Bracket for E9x/E8x BMW's is a modular bracket capable of being used with a single or dual Walbro 450 or 525 fuel pump(s).

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 2 (Kit Only) - BMW E-...

T#:22130471

Part#: 601-0011

Ships in 9 Business Days

$ 369.99 USD

Add to Wish List

Qty

$ 369.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

T#:38161740

Part#: 201-0292

Ships on Sep 17, 2026

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. Don't have a performance regulator or not sure what to buy? Precision Raceworks also offers an Adjustable 1-to-1 regulator kit that mounts at the front of the car or the world's smallest high-flow inline static regulator kit which is compatible with most all port injection fuel rails. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen.

Show More Show Less

Precision Raceworks Bucketed Performance Fuel Pump - Stage 3.75 (v2) ...

T#:38195440

Part#: 601-0113

Ships in 10 Business Days

$ 1,018.99 USD

Add to Wish List

Qty

$ 1,018.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. Our Stage 3.75 bucketed fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts a Walbro 535 (F90000295) primary pump and a Walbro 525 (F90000285) secondary pump offering maximum flow. This pump can support up to 1,150whp* (Rated for 975whp on 100% E85) and is ready to grow with you as your needs demand. With a modular plug and play design this kit can be upgraded with our Stage 4 module and have everything you need to match your future horsepower goals.

Show More Show Less

High Performance Stainless Steel 10 Micron Inline Filter Unit ...

T#:2691345

Part#: SP-54-HXF10

Special Order: No Guaranteed ETA

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

The filter unit on the continental rotary high pressure fuel pumps perform an important function of final stage filtering of fine particle impurities before it reaches the hpfp pump chamber or worse, the injectors leading to leaky injectors. The problem with them is that they are extremely tiny and restrictive and sometimes even rupture failing to filter at all. The issue becomes worse when running high-performance products like the Spool Helix overdrive system because now you have an increased flow requirement through this filter that it just cannot keep up.

Show More Show Less

Spool Performance N54 Stage 3 Bucketless LPFP

T#:640947

Part#: SP-BM54FP-S3

Special Order: No Guaranteed ETA

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Stage 3 LPFP upgrade kit for your N54 engine

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series ...

T#:403273

Part#: FILPFPK2

Back Ordered

Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

Sale - Save 2%

$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping

Show More Show Less

Hitachi Fuel Pump Camshaft Follower - BMW N20 N55 S55 N63 S63 B48/46 ...

T#:589968

Part#: 11327601233

Back Ordered

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

A faulty camshaft follower can damage the engine and cause incorrect valve timing.

Fuel Pump Expansion Module - Stage 3

T#:27405482

Part#: 622-0244

Ships in 10 Business Days

$ 369.99 USD

Add to Wish List

Qty

$ 369.99 USD

Add to Wish List

Precision Raceworks Fuel Pump Expansion Modules - Stage 4 w/ Boost Re...

T#:38195439

Part#: 622-0246

Ships in 10 Business Days

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. NOTE: This module requires the customer to already own a stage 2, 2.5, or 3 Precision Raceworks Pump

Show More Show Less

Genuine BMW High Pressure Fuel Pump Mounting Bolt - M6X25-U1 - BMW N2...

T#:207714

Part#: 13517632572

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

This bolt attaches the high-pressure fuel pump to the engine's cylinder head. Any time this bolt is removed to remove or replace the high-pressure fuel pump, it should be replaced with a brand new bolt as it is a single-use bolt per BMW. This bolt comes pre-applied with thread sealant to prevent oil leaks.

Show More Show Less

Hitachi Fuel Supply Module - BMW N20 N55 N26

T#:48850079

Part#: 16117243975

Ships in 7 Business Days

$ 344.99 USD

Add to Wish List

Qty

$ 344.99 USD

Add to Wish List

Delivers fuel from the tank to the engine.

Black Market Parts Fuel Pump Expansion Modules - Stage 3.5 - BMW E9X ...

T#:38195448

Part#: 601-0071

Ships in 5 Business Days

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Black Magic Parts' (by Precision Raceworks) bucketless low pressure fuel pumps are designed for customers looking to run all blends of E85. The pump ships assembled with an OEM connector to plug into the factory fuel pump top hat making it quick and easy to install. The Stage 3.5 pump module adds a Walbro 525 pump to your existing PR Stage 2 or 2.5 kit. This upgrade module will include all necessary hardware and wiring to upgrade your pump to a stage 3.5 or 3.75. Once combined with your existing kit, this pump combination can support up to 1,100whp* (Rated for 950whp on 100% E85).

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 4 (Kit Only) - BMW E-...

T#:37993459

Part#: 622-0047

Ships in 10 Business Days

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks Fuel Pump Expansion Modules - Stage 3.5 (Upgrades...

T#:38195435

Part#: 601-0072

Ships in 10 Business Days

$ 374.99 USD

Add to Wish List

Qty

$ 374.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. NOTE: This module requires the customer to already own a stage 2 or 2.5 Precision Raceworks Pump Stage 3.5 (6.4 liters per minute) - The Stage 3.5 pump module adds a Walbro 525 pump to your existing PR Stage 2 or 2.5 kit. This upgrade module will include all necessary hardware and wiring to upgrade your pump to a stage 3.5 or 3.75. Once combined with your existing kit, this pump combination can support up to 1,100whp* (Rated for 950whp on 100% E85).

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 3 (Kit Only) - BMW E-...

T#:27338719

Part#: 622-0022

Ships in 10 Business Days

$ 724.99 USD

Add to Wish List

Qty

$ 724.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks Fuel Pump Expansion Modules - Stage 3.5 w/ Boost ...

T#:38195438

Part#: 622-0245

Ships in 10 Business Days

$ 434.99 USD

Add to Wish List

Qty

$ 434.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. NOTE: This module requires the customer to already own a stage 2 or 2.5 Precision Raceworks Pump Stage 3.5 (6.4 liters per minute) - The Stage 3.5 pump module adds a Walbro 525 pump to your existing PR Stage 2 or 2.5 kit. This upgrade module will include all necessary hardware and wiring to upgrade your pump to a stage 3.5 or 3.75. Once combined with your existing kit, this pump combination can support up to 1,100whp* (Rated for 950whp on 100% E85).

Show More Show Less

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

T#:38161742

Part#: 622-0269

Ships in 10 Business Days

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit includes Precision Raceworks' 5 Bar static micro fuel regulator. This regulator is the simplest way to move your fuel pressure regulation to the engine bay, requiring no adjustment or vacuum lines. 5 Bar is typically the recommended pressure for most BMW applications

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 3.75...

T#:38195446

Part#: 601-0064

Ships in 10 Business Days

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3.75 bucketless fuel pump kit includes a Walbro 535 (F90000295) primary and a Walbro 525 (F90000285) secondary fuel pump, capable of supporting up to 1200whp on 93 octane pump gas or 1000whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed!

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 3.75 v2 (Kit Only) - ...

T#:37993458

Part#: 622-0137

Ships in 10 Business Days

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks Fuel Pump Expansion Modules - Stage 4 (Upgrades S...

T#:38195436

Part#: 601-0013

Ships in 10 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. NOTE: This module requires the customer to already own a stage 2, 2.5, or 3 Precision Raceworks Pump

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 2.5 v2 (Kit Only) - B...

T#:37993460

Part#: 601-0075

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks Fuel Pump Expansion Modules - Stage 3 (Upgrades S...

T#:38195434

Part#: 601-0012

Ships in 10 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. NOTE: This module requires the customer to already own a stage 2 or 2.5 Precision Raceworks Pump Stage 3 (5.65 liters per minute) - The Stage 3 bucketed module will add a 450 pump to your existing PR Stage 2 or 2.5 kit. This will include all necessary hardware and wiring to upgrade your pump to a stage 3 and support up to 1000whp* (Rated for 875whp on 100% E85)

Show More Show Less

BMW E9x / E8x In-Tank Fuel Filter & Regulator (V2) - Micro Inline ...

T#:28770028

Part#: 622-0273

Ships in 10 Business Days

$ 774.99 USD

Add to Wish List

Qty

$ 774.99 USD

Add to Wish List

Improve the fuel system of your BMW with the BMW E9x / E8x In-Tank Fuel Filter & Regulator (V2) - Micro Inline. This upgraded version offers enhanced performance and reliability, ensuring optimal fuel delivery for your vehicle.

Specifically designed for BMW E9x and E8x models
Upgraded version for improved performance
Functions as both a fuel filter and regulator
Ensures optimal fuel delivery to the engine

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 3.5 (Kit Only) - BMW ...

T#:22130453

Part#: 622-0046

Ships in 10 Business Days

$ 799.99 USD

Add to Wish List

Qty

$ 799.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 3.5 ...

T#:38195445

Part#: 601-0063

Ships in 10 Business Days

$ 624.99 USD

Add to Wish List

Qty

$ 624.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3.5 bucketless fuel pump kit includes a single Walbro 450 (F90000274) primary fuel pump and a single Walbro 525 (F90000285) secondary fuel pump, capable of supporting up to 1150whp on 93 octane pump gas or 975whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed!

Show More Show Less

Precision Raceworks Bucketed Performance Fuel Pump - Stage 4 - BMW E-...

T#:38195441

Part#: 601-0114

Ships in 10 Business Days

$ 1,549.99 USD

Add to Wish List

Qty

$ 1,549.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. Our Stage 4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts dual Walbro 450 (F90000274) fuel pumps in bucket and a third Walbro 450 (F90000274) fuel pump outside the bucket. This pump can support OVER 1,300whp* (Rated for 1150whp on 100% E85) making it capable of handling anything you can throw at it!

Show More Show Less

Project Cars

SELECT YOUR BMW

Fuel Pump for BMW 1 Series E82 (2008-2013)

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results