BMW X Series E84 (2013-2015)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Liqui Moly Ceratec Oil Additive
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:379270
Part#: 3721
In Stock
Sale - Save 5% $ 27.99
$ 26.59 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 27.99
$ 26.59 USD
Free Shipping on orders $49 and up
Using a combination of ceramic compounds, this oil additive reduces friction and wear by forming a protective film that cuts down on direct metal to metal contact. This both extends the engines service life and reduces fuel consumption in both gasoline and diesel engines. Specially formulated to adhere to the internal engine's metal surfaces, which makes this great for vehicles with high pressure, cam-driven fuel pumps and engines that make excessive noise on start up.
Show More Show Less
Proline Engine Flush and Cera Tec Oil Treatment - Oil Change Additive...
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:578656
Part#: CERATECFLUSHKT
In Stock
Sale - Save 5% $ 40.99
$ 38.93 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 40.99
$ 38.93 USD
Free Shipping on orders $49 and up
**Not to be used with Liqui Moly Molygen Engine Oil - Molygen already includes friction modifiers** Step 1 - Engine Flush - Add to engine oil before engine oil change. Let engine run on idle speed for 10 minutes. Drain oil, change oil filter and re-fill with fresh high quality oil. Pro-Line Engine Flush is a development product based on highly effective state-of-the-art additive technology. These highly effective detergent and dispersant additives, in association with the carrier fluid, have been tested in the laboratory and in practical field trials for their ability to dissolve sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Properties: Gentle and rapid cleaning Neutral to seals and other materials installed in the engine Compatible with catalytic converters Highly economical No additional environmental pollution Simple to use Contents sufficient for 5 liter engine oil capacity Fully compatible with all commercially available engine oils. Benefits: Removes deposits & residues Dissolves sludge & lacquer and isolates solid particles & liquid contaminants Improves the combustion process and restores full engine performance Prevents corrosion of unprotected metal surfaces Recovers oil lubricating properties Suitable for all gasoline and diesel engines. Step 2 - Cera Tec - Add in with your New Engine Oil Cera Tec is a high quality ceramic wear protection product which is safe for use in all engine oils. It reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Cera Tec reduces direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines. The chemicals in this specially-formulated product adhere to metal surfaces to reduce internal wear and friction, giving you peace-of-mind and saving you costly repairs in the future. Treats up to 5 liters of engine oil and provides up to 30,000 miles of protection under normal driving conditions. *Note: Not suitable for use with wet clutch applications or limited slip differentials. Great for use in vehicles with high-pressure, cam-driven fuel pumps or engines making noise upon start-up.
Show More Show Less
APEX Wheels - Corporate Logo
T#:637384
Part#: APEXM12STDKIT5HX
Ships in 2 Business Days
$ 160.00 USD
Free Shipping
$ 160.00 USD
Free Shipping

Liqui-Moly Oil Change Additive Package - Proline Engine Flush and MoS...
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:578655
Part#: MOS2FLUSHKT
In Stock
Sale - Save 5% $ 21.99
$ 20.88 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 21.99
$ 20.88 USD
Free Shipping on orders $49 and up
This two-step kit features a flushing additive to be run through before the oil change and MoS2 for after new oil has been added.

Special Tec B FE 0W-30 Motor Oil - 5 L
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:32980578
Part#: 22261
In Stock
Sale - Save 10% $ 58.98
$ 53.08 USD
Free Shipping on orders $49 and up
Sale - Save 10% $ 58.98
$ 53.08 USD
Free Shipping on orders $49 and up
HJS - Corporate Logo
T#:396285
Part#: 11657620508
In Stock
$ 21.49 USD
Free Shipping on orders $49 and up

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each is designed for superior performance and reliability in exhaust system maintenance and upgrades. Engineered by Turner Motorsport, this high-quality clamp ensures a secure and leak-free connection in your BMW's exhaust system.

  • Durable Construction: Made from premium materials to withstand high temperatures and harsh conditions, ensuring long-lasting performance.
  • Precision Fit: Designed to fit perfectly with BMW N54, N55, N63, and S63 engines, offering a secure and reliable seal.
  • Improved Exhaust Efficiency: Prevents leaks and maintains optimal exhaust flow, contributing to better engine performance and efficiency.
  • Easy Installation: The V-band design allows for quick and easy installation or removal, simplifying exhaust system maintenance.
  • Versatile Use: Ideal for both performance upgrades and routine repairs, making it a valuable addition to any BMW enthusiast's toolkit.
Show More Show Less

10w-60 Engine Oil Liqui Moly Race Tech GT1 - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588076
Part#: 2068/12KT
In Stock
Sale - Save 5% $ 143.99
$ 136.69 USD
Free Shipping
Sale - Save 5% $ 143.99
$ 136.69 USD
Free Shipping

10w-60 Engine Oil Liqui Moly Race Tech GT1 is specially formulated to meet the rigorous demands of high-performance BMW engines. This advanced engine oil provides exceptional lubrication, ensuring optimal engine performance even under the most challenging conditions. Designed for both street and track use, it offers superior wear protection and thermal stability, making it the perfect choice for enthusiasts who demand the best for their vehicles.

Benefits:

  • High Viscosity Stability: Maintains consistent performance across a wide temperature range, ideal for both hot and cold conditions.
  • Exceptional Engine Protection: Reduces wear and tear, extending the life of engine components, and ensuring reliability during high-performance driving.
  • Enhanced Performance: Improves engine responsiveness and efficiency, providing noticeable power gains and better throttle response.
  • Compatible with BMW Engines: Specifically designed to meet the lubrication needs of BMW’s high-performance engines, including those in motorsport applications.
  • Advanced Additive Technology: Includes high-quality additives that prevent sludge formation and keep the engine clean for optimal performance.

Choose 10w-60 Engine Oil Liqui Moly Race Tech GT1 for your BMW to experience superior performance and protection in every drive.

Show More Show Less
Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 5 Liters
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:599295
Part#: 22122
In Stock
Sale - Save 5% $ 46.99
$ 44.64 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 46.99
$ 44.64 USD
Free Shipping on orders $49 and up
Top class fully synthetic, low-SAPS motor oil with the latest additive technology for superior performance and efficiency in modern gasoline and diesel vehicles with and without particulate filters (GPF / DPF). Guarantees lowest friction and outstanding protection even under tough operating conditions in high-performance engines. Properties: outstanding lubrication reliability rapid oil penetration excellent high-pressure and wear protection properties prevents the build-up of deposits outstanding engine cleanliness optimum stability to aging reduces fuel consumption compatible for the use with turbochargers and catalytic converters Specifications and approvals: ACEA C3 API SN BMW Longlife-04 (LL-04) - Backwards compatible with Longlife-98 (LL-98) and Longlife-01 (LL-01) MB-Approval 229.31 ∙ MB-Approval 229.51 ∙ MB-Approval 229.52 ∙ Porsche C40 VW 511 00 Recommended for the following specifications: GM dexos2 MB 226.5 Renault RN 0700 Renault RN 0710 Specifically developed for selected gasoline and diesel engines of the latest generation. Tested safe with catalytic converters and turbochargers. Depending on the manufacturer's instructions, extended oil change intervals can be achieved. Founded more than 50 years ago, Liqui Moly GmbH from Ulm in southern Germany offers a wide variety of high-quality products including motor oils, additives, car care products, and chemically-based technical solutions for automotive applications. Liqui Moly develops and tests its products in its own laboratories, manufactures only in Germany, and is among the most distinguished in the industry.
Show More Show Less

Liqui-Moly Brake Anti-Squeal Paste - 250g
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:599297
Part#: 22092
Ships Jul 22, 2025
Sale - Save 11% $ 36.99
$ 33.00 USD
Free Shipping on orders $49 and up
Sale - Save 11% $ 36.99
$ 33.00 USD
Free Shipping on orders $49 and up
Extremely adhesive and high-temperature resistant specialty for lubricating and separating modern brake systems of all types of motor vehicles. It is made of synthetic materials, resists road salt and splash water, and prevents and eliminates squeaking noises from brakes. With excellent corrosion protection and particularly suited for the use with aluminum and magnesium materials as well as on vehicles with ABS / ESP systems. Properties good corrosion protection easy to use eliminates squeaks resistant to road salt and splash water extremely low friction outstanding thermal stability extremely adherent ideally suited as a separating paste Brake Anti-Squeal Paste has been specially developed for the assembly, repair, and maintenance of brake systems. Used for basic lubrication and as a preventive measure against brake squeals. However, it is also universally suitable for numerous applications apart from brake systems. **WARNING: Cancer- www.P65Warnings.ca.gov
Show More Show Less

Leichtlauf High Tech Engine Oil (5w-40) - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588077
Part#: 2331/12KT
In Stock
Sale - Save 5% $ 126.00
$ 119.70 USD
Free Shipping
Sale - Save 5% $ 126.00
$ 119.70 USD
Free Shipping
5W-40 Molygen New Generation Engine Oil - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588071
Part#: 20230/12KT
In Stock
Sale - Save 5% $ 119.99
$ 113.89 USD
Free Shipping
Sale - Save 5% $ 119.99
$ 113.89 USD
Free Shipping
5W-40 Molygen New Generation Engine Oil - Case Of 12 is engineered to provide superior protection and performance for modern engines. This advanced engine oil is formulated with high-quality synthetic base oils and innovative additives, ensuring optimal lubrication and enhanced efficiency. Ideal for both gasoline and diesel engines, this oil delivers excellent wear protection, thermal stability, and cleanliness. By choosing Molygen New Generation Engine Oil, vehicle owners can experience smoother engine operation and improved fuel efficiency. This case of 12 bottles ensures that you have an ample supply for regular maintenance, keeping your engine in top condition and prolonging its lifespan.

Key Benefits:

  • Superior Protection: Formulated to minimize engine wear and extend engine life.
  • Enhanced Efficiency: Provides excellent fuel economy and reduces emissions.
  • Thermal Stability: Maintains viscosity and performance in extreme temperatures.
  • Clean Engine: Keeps engine components clean by preventing sludge and deposit buildup.
  • Convenient Packaging: Case of 12 ensures you always have the oil you need for maintenance.
Show More Show Less
HJS - Corporate Logo
T#:586692
Part#: 18307606136
In Stock
$ 30.55 USD
Free Shipping on orders $49 and up


Special Tec LL 5W-30 Motor Oil - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588073
Part#: 2248/12KT
In Stock
Sale - Save 5% $ 117.99
$ 111.61 USD
Free Shipping
Sale - Save 5% $ 117.99
$ 111.61 USD
Free Shipping
Liqui-Moly Air-Conditioner System Cleaner Gun
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:637244
Part#: 4090
In Stock
Sale - Save 5% $ 125.99
$ 119.69 USD
Free Shipping
Sale - Save 5% $ 125.99
$ 119.69 USD
Free Shipping
Special cleaning gun for optimum application of the specially developed Air Conditioning System Cleaning Fluid, Part. No. 4091/4092/9001/20915/20841. Enables optimum atomization of the cleaning fluid and thanks to the spherical spray jet ensures 99.9 % removal of mold and bacteria such as legionellae from the air conditioning system. The very flexible spray probe allows even the most remote corners to be reached. Developed specially for cleaning air conditioning systems in passenger cars, commercial vehicles, and buses as well as in homes.
Show More Show Less
Longtime High Tech Engine Oil (5w-30) - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588075
Part#: 2038/12KT
In Stock
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping

Top Tec 1800 Automatic Transmission Fluid - 20 Liters
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:2027101
Part#: 20034
In Stock
$ 129.99 USD
$ 129.99 USD

Liqui Moly Top Tec 1800 Automatic Transmission Fluid - 20 Liters

Fully synthetic leading-edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears. The use of modern additive technology provides ultimate protection, longer fluid life, and stability combined with ideal shift quality under all operating conditions.

Properties:

  • Excellent viscosity/temperature properties
  • Prevents foam formation
  • Enables a multifaceted range of applications
  • Outstanding friction characteristics
  • High resistance to aging
  • Very good low-temperature properties
  • Excellent corrosion protection
  • Very wear-resistant
  • Outstanding resistance to oxidation

Approvals:

Dexron VI

Ford Mercon LV

LiquiMoly recommends this product for vehicles that need to comply with the following specifications:

  • Aisin Warner AW-1
  • BMW 83 22 0 142 516
  • BMW 83 22 2 152 426
  • BMW 83 22 2 289 720
  • BMW 83 22 2 305 396
  • BMW 83 22 2 305 397
  • BMW 83 22 2 355 599
  • BMW M-1375.4
  • MB 236.12
  • MB 236.14
  • VW G 055 005
  • VW G 055 540
  • VW G 060 162
Show More Show Less

Sunex - Corporate Logo
T#:391150
Part#: SUU884506
In Stock
$ 20.99 USD
Free Shipping on orders $49 and up
3/8" drive socket with 5/8" opening for most spark plugs
APEX Wheels - Corporate Logo
T#:11170593
Part#: EC7RS189ET30AN
In Stock
$ 689.00 USD
Free Shipping
$ 689.00 USD
Free Shipping

Pro-Line Automatic Transmission Cleaner - 1 Liter
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:25839044
Part#: 20224
In Stock
Sale - Save 10% $ 29.99
$ 26.99 USD
Free Shipping on orders $49 and up
Sale - Save 10% $ 29.99
$ 26.99 USD
Free Shipping on orders $49 and up

Elevate your automatic transmission's performance and lifespan with Liqui Moly's advanced cleaning fluid:

  • Dissolves problematic deposits and residues for optimized gear shift performance.
  • Extends transmission service life by effectively cleaning sludge and lacquer formers.
  • Gentle cleaning action preserves rubber and plastic seals.
  • Optimizes economical use, ensuring cost-effective maintenance.
  • Effortlessly tackles stubborn dirt for a thorough clean.
  • Suitable for all automatic transmissions, providing universal compatibility.
  • Convenient application with Liqui Moly Gear Tronic for enhanced effectiveness.
Show More Show Less
APEX Wheels - Corporate Logo
T#:19395576
Part#: ARC818930SQ
Ships in 2 Business Days
Starting at $ 1,476.00 USD
Free Shipping
Starting at $ 1,476.00 USD
Free Shipping
Apex ARC8 18x9" ET30 Wheel Set Apex 8.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

APEX Wheels - Corporate Logo
T#:19428670
Part#: VS5RS181025SQ
Back Ordered
Starting at $ 2,636.00 USD
Free Shipping
Starting at $ 2,636.00 USD
Free Shipping
Apex VS5RS 18x10" ET25 Wheel Set Apex 10" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

Liqui Moly Synthoil Premium Engine Oil (5w-40) - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588074
Part#: 2040/12KT
In Stock
Sale - Save 10% $ 180.00
$ 162.00 USD
Free Shipping
Sale - Save 10% $ 180.00
$ 162.00 USD
Free Shipping

Synthoil Premium Engine Oil (5w-40) - Case Of 12

Ensure optimal performance and protection for your BMW engine with the Synthoil Premium Engine Oil (5w-40) - Case Of 12. Crafted to meet the high demands of modern engines, this engine oil is a top-tier synthetic blend that offers superior lubrication and engine cleanliness. With a carefully formulated composition, it provides outstanding wear protection, maintains stability under extreme temperatures, and minimizes deposits, promoting engine longevity and efficiency.

Key Benefits:

  • Superior engine protection and lubrication
  • Maintains stability in extreme temperatures
  • Minimizes engine deposits for cleaner operation
  • Ensures outstanding wear protection for engine components
  • Promotes engine longevity and efficiency
Show More Show Less
APEX Wheels - Corporate Logo
T#:31788333
Part#: ML10181040120AKT
In Stock
$ 2,816.00 USD
$ 2,816.00 USD
Liqui Moly Universal Cleaner - 1 Liter
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:587533
Part#: 20396
In Stock
Sale - Save 10% $ 26.99
$ 24.29 USD
Free Shipping on orders $49 and up
Sale - Save 10% $ 26.99
$ 24.29 USD
Free Shipping on orders $49 and up
Concentrated Universal Cleaner that can be diluted with water. Phosphate-free, silicate-free and solvent-free. Biologically degradable. For mixing ratios up to 1:2,000, depending on the application. Application: Can be applied by spraying or immersion, or wiping with brushes, cloths or sponges. Cleaning by spraying: Dilute with water according to requirements and spray it onto the surface of the object. Allow cleaner to act for a brief period before rinsing off with water. Cleaning by immersion: Dilute with water according to requirements. Immerse the object and rinse off with water after allowing the cleaner to act for short time. Wiping: Dilute with water according to requirements and apply to dry or pre-dampened surface. Allow cleaner to act for a brief period before rinsing off. Note: Do not use in concentrated form or allow to dry onto surface to be cleaned. Treat non-ferrous heavy metals and light alloys only briefly and rinse thoroughly with water. The product has a powerful degreasing effect and if used repeatedly in high concentrations will cause colors to fade. Always test on hidden areas first if using on sensitive materials. Mixing ratio with water for various applications: Cleaning engines, engine compartments, bodies, door edges, truck tarpaulins and superstructures 1:5 to 1:10 Removal of insect remains 1:10 Cleaning wheel rims 1:2 to 1:5 Machine tools 1:10 to 1:40 Plastic covers 1:10 to 1:20 Workshop floors and walls - manually - 1:20 to 1:40 Road tunnels, boundary posts - mechanically - 1:40 to 1:60 Chemical pre-wash in brush systems 1:5 to 1:10 High-pressure and steam jet appliances 1:10 to 1:20 Copolymere de-waxers 1:3 to 1:5 Workshop windows, glass panes 1:500 to 1:2,000 Vehicle interiors 1:10 to 1:50
Show More Show Less


APEX Wheels - Corporate Logo
T#:180706
Part#: ARC81810ET25AN
In Stock
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
18x10" ET25 Anthracite Concave APEX ARC-8 Wheel 19.95lbs
Wheel Specs
Fitment:Rear
Size:18x10.0"
Offset (mm):25
Weight (lbs):19.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels - Corporate Logo
T#:19395591
Part#: ARC817942SQ
Ships in 9 Business Days
Starting at $ 1,316.00 USD
Free Shipping
Starting at $ 1,316.00 USD
Free Shipping
Apex ARC8 17x9" ET42 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
APEX Wheels - Corporate Logo
T#:19395580
Part#: FL518930SQ
Ships in 5 Business Days
Starting at $ 1,716.00 USD
Free Shipping
Starting at $ 1,716.00 USD
Free Shipping
Apex FL-5 18x9" ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

APEX Wheels - Corporate Logo
T#:599071
Part#: EC71995ET28RSKT
Ships in 5 Business Days
$ 1,836.00 USD
$ 1,836.00 USD
Specifications: Color - Race Silver Size Front - 19x9.5" ET28 ​Size Rear - 19x10.5" ET45

APEX Wheels - Corporate Logo
T#:637215
Part#: ARC8179ET30MBZ
Special Order: No Guaranteed ETA
$ 329.00 USD
$ 329.00 USD
Black Forest Industries - Corporate Logo
T#:391722
Part#: GS2B
Ships on Jul 21, 2025
Starting at $ 174.99 USD
Free Shipping
Starting at $ 174.99 USD
Free Shipping

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less

APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 5 Business Days
$ 449.00 USD
$ 449.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels - Corporate Logo
T#:19395583
Part#: SM1018930SQ
Ships on Aug 13, 2025
Starting at $ 1,696.00 USD
Free Shipping
Starting at $ 1,696.00 USD
Free Shipping
Apex SM-10 18x9" ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 6 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Complete set of spark plug sockets.

APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Sunex - Corporate Logo
T#:5229449
Part#: 224UMD
Ships Jul 21, 2025
$ 27.99 USD
Free Shipping on orders $49 and up
Deep Impact Socket on a swivel.
Sunex - Corporate Logo
T#:642035
Part#: 9914A
Ships Jul 21, 2025
$ 124.00 USD
Free Shipping
$ 124.00 USD
Free Shipping
Radius V-Groove design creates an anti-slip while also preventing round-off.


Sunex - Corporate Logo
T#:5269512
Part#: 3670SED
Ships Jul 21, 2025
$ 62.00 USD
Free Shipping on orders $49 and up
CR-MO alloy steel for long life
Ceramic Paste - 200mL
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:403011
Part#: 20242
Ships Jul 22, 2025
Sale - Save 10% $ 45.99
$ 41.28 USD
Free Shipping
Sale - Save 10% $ 45.99
$ 41.28 USD
Free Shipping
Discover Liqui Moly Ceramic Paste - 200mL , a versatile solution designed for a multitude of applications. Its advanced formulation delivers exceptional adhesion and high temperature resistance, making it indispensable as a release agent to thwart seizing, cold welding, rust freezing, and stick-slip. With its metal-free and non-conductive composition, it's perfectly suited for use with aluminum and magnesium materials. Embracing a broad application range from -40°C to +1,400°C (-104°F to +2,552°F) , it excels under diverse conditions. Whether you require high-temperature or anti-seize lubrication, or general lubrication for threaded fasteners, trust in Liqui Moly Ceramic Paste for reliable performance.
Show More Show Less
Sunex - Corporate Logo
T#:385986
Part#: 6602LPD
Back Ordered
$ 690.00 USD
$ 690.00 USD
Designed to reach far under your vehicle with this long and low chassis

APEX Wheels - Corporate Logo
T#:19395578
Part#: EC718931SQ
Back Ordered
Starting at $ 1,556.00 USD
Free Shipping
Starting at $ 1,556.00 USD
Free Shipping
Apex ARC8 18x9" ET31 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

Synthoil Energy Engine Oil A40 (0w-40) - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588072
Part#: 2049/12KT
In Stock
Sale - Save 5% $ 143.99
$ 136.69 USD
Free Shipping
Sale - Save 5% $ 143.99
$ 136.69 USD
Free Shipping
Liqui-Moly Top Tec ATF 1800 Synthetic Automatic Transmission Fluid - ...
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:554450
Part#: 20032
In Stock
Sale - Save 5% $ 9.50
$ 9.03 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 9.50
$ 9.03 USD
Free Shipping on orders $49 and up
For modern automatic transmissions, hybrid transaxle systems, and electric drive differentials where an ATF fluid meeting current product specifications is required. Fully synthetic leading-edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears. The use of modern additive technology provides ultimate protection, longer fluid life, and stability combined with ideal shift quality under all operating conditions. Properties: excellent viscosity/temperature properties prevents foam formation enables a multifaceted range of applications outstanding friction characteristics high resistance to aging very good low-temperature properties excellent corrosion protection high wear resistance outstanding resistance to oxidation
Show More Show Less

Liqui-Moly Power Steering Fluid Stop-Leak - 35mL
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:638938
Part#: 20284
In Stock
Sale - Save 5% $ 6.99
$ 6.64 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 6.99
$ 6.64 USD
Free Shipping on orders $49 and up
Put a stop to that leak in your hydraulic power steering system
Liqui-Moly Ceramic Paste - 250g
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:599298
Part#: 22094
In Stock
Sale - Save 12% $ 55.99
$ 49.55 USD
Free Shipping
Sale - Save 12% $ 55.99
$ 49.55 USD
Free Shipping
Ceramic paste is a modern, multifunctional formulation that can be used for most common standard paste applications. Due to its high adhesion and temperature resistance, Ceramic Paste can be used as a release agent, for lubrication and to protect against corrosion and wear. Suitable for use with aluminum and magnesium materials. Properties resistant to certain organic acids and alkalis prevents stick-slip good water resistance prevents seizing and cold welding does not attack common sealing materials prevents brake noise highest load-carrying capacity non-toxic Used for lubricating all types of high-load sliding surfaces. Used especially for low slide speeds and/or oscillating movements. and for screw, plug-in, and bayonet connectors made from steel and non-ferrous metals. Separation of components subject to heat stress, such as internal combustion engines, turbines, and motor vehicle brake systems. Corrosion protection of bolts, pins, studs, flanges, spindles and seatings in refineries, steel and cement works, as well as shipping and agricultural engineering.
Show More Show Less

LiquiMoly DOT 5.1 Brake Fluid - 250ml
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:2027103
Part#: 20158
In Stock
Sale - Save 5% $ 4.99
$ 4.74 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 4.99
$ 4.74 USD
Free Shipping on orders $49 and up
Synthetic formulation based on glycol ethers, alkyl polyglycols, and glycol ether esters which guarantees full function even during extreme conditions. A higher wet and dry boiling point compared to DOT 3 and DOT 4 brake fluids and unique inhibitors provide corrosion and oxidation protection at high temperatures. Special scavengers are used to suppress steam at increased moisture levels. For hydraulic systems that specify a fluid consistent with current product specifications. Observe the manufacturer's instructions! Properties: excellent viscosity/temperature properties high thermal stability miscible and compatible with high-quality synthetic brake fluids assures a high degree of lubricating action on all moving components in the hydraulic brake circuit outstanding protection against the formation of steam bubbles excellent elastomer compatibility excellent low-temperature behavior extremely high wet and dry boiling points Approvals: FMVSS 116 DOT 3 FMVSS 116 DOT 4 FMVSS 116 DOT 5.1 ISO 4925 Class 3 ISO 4925 Class 4 ISO 4925 Class 5.1 SAE J 1703 SAE J 1704
Show More Show Less

Liqui-Moly ATF Additive - 250mL
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:1195998
Part#: 20040
In Stock
Sale - Save 5% $ 12.99
$ 12.34 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 12.99
$ 12.34 USD
Free Shipping on orders $49 and up
Can be added to the power steering reservoir or automatic transmission
Liqui-Moly Radiator Stop-Leak - 250mL
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:402989
Part#: 20132
In Stock
Sale - Save 5% $ 6.99
$ 6.64 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 6.99
$ 6.64 USD
Free Shipping on orders $49 and up
It’s not easy to find small leaks caused by stone chipping, porous soldered connections or hairline fractures in the cooling system on all water-cooled engines – the only clue is in the reduced coolant level. Radiator Sealant seals these types of leaks completely, easily and in an instant and safeguards the combustion chamber against damage caused by coolant ingress.
Show More Show Less
Liqui-Moly Motor Oil Saver - 300mL - BMW & MINI
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:552770
Part#: 2020
In Stock
Sale - Save 10% $ 11.99
$ 10.79 USD
Free Shipping on orders $49 and up
Sale - Save 10% $ 11.99
$ 10.79 USD
Free Shipping on orders $49 and up
Rejuvenates and regenerates dried out, porous or shrunken oil and valve stem seals, thus reduces motor oil consumption and increases the compression. One can treats up to 5 liters of oil. 3 liters of oil minimum required for treatment.
Show More Show Less


500mL Pro-Line Fuel System Cleaner
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:403017
Part#: 2030KT
In Stock
Sale - Save 5% $ 17.99
$ 17.09 USD
Free Shipping
Sale - Save 5% $ 17.99
$ 17.09 USD
Free Shipping
Liqui-Moly Pro-Line Diesel Intake System Cleaner - 400mL
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:402995
Part#: 20208KT
In Stock
Sale - Save 5% $ 12.00
$ 11.40 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 12.00
$ 11.40 USD
Free Shipping on orders $49 and up
Special active solvent with a high-tech additive combination for removing typical dirt and deposits in the intake and throttle valve area. Loosens and removes greasy deposits and dirt such as oil, soot, etc. It guarantees the functional performance of the moving parts and reduces fuel consumption. Increases the reliability of diesel-powered engines. Recommended for preventative use during an inspection. Suitable for vehicles with EGR valve and DPF.
Show More Show Less