BMW Engine Parts for BMW X Series E84 (2013-2015)

Ensure the correct voltage is being sent to/from the alternator, keep you electrical system safe from excessive voltage peaks that could cause damage to sensitive electronics and blow out fuses. Bosch's high quality unit will give you peace of mind knowing the electrical system will be safe and the voltage will remain steady. OEM replacement for BMW part # 12317561939

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E9X BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your E9X BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for RWD E82/E88, E84, and E9X applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part number 12427549396.

If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. OEM replacement for the original BMW part # 12411312104 and 12411312130. This is a NEW, not used, component with no included core charge!

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

We recommend replacing hardware when doing your starter, since the bolts are aluminum and threads become stretched: Genuine BMW aluminum starter hardware set 12410392577 

Used on a wide variety of models with the BMW N52, N54, and N55 engines, including: E9X, F01/02, F07/10, E8X, E70, E60/61, F25, F30, and Z4.

Ensure your BMW's cooling system stays in top shape with ECS Tuning's Billet Aluminum Radiator Drain Plug. Designed specifically for late-model 1-Series and 3-Series BMWs, this replacement plug addresses the common issue of weak plastic drain plugs. Constant exposure to engine heat and road debris makes the plastic plugs brittle, leading to frustration with broken plugs. ECS Tuning's billet aluminum alternative puts an end to these problems.

• Durable Replacement: Say goodbye to weak plastic drain plugs.
• Enhanced Material: Billet aluminum provides superior strength and longevity.
• Deeper Screw Head: Accommodates Phillips head or flat head screwdrivers for better engagement.
• Reduced Stripping Risk: Minimize the chance of stripping out the screw head.

Don't let cooling system maintenance be a hassle. Order ECS Tuning's Billet Aluminum Radiator Drain Plug now and experience worry-free service.

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

• 6-micron filtration – Removes fine particles and contaminants to protect engine components
• High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
• Optimized fuel flow – Maintains consistent fuel delivery for peak performance
• Durable construction – Engineered for long-lasting reliability in high-demand applications
• Easy replacement – Simple installation for routine maintenance
• Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

• Racing applications: Inspect at least twice per season and replace as needed
• Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.