BMW Engine Parts for BMW X Series E84 (2013-2015)

The Schwaben Piston Ring Filer is a vital tool for obtaining the precise end gap necessary for optimal piston ring performance.

This filer allows you to swiftly and accurately file piston rings to exact measurements, enhancing your engine’s efficiency and lifespan. By simply positioning the piston ring and turning the handle, you can easily rotate the abrasive wheel for a smooth and effective filing process.

**Note:** For the Schwaben Universal Piston Ring Compressor, check out T25805755!

Key Features:

• Optimize Performance: Achieve the perfect end gap crucial for top engine efficiency.
• Quick and Precise: File rings to exact specifications with ease.
• Easy Operation: Position the piston ring and turn the handle to effortlessly rotate the abrasive wheel.
• Enhanced Engine Longevity: Accurate end gaps contribute to longer engine life and better performance.

Instructions:

1. Position the Ring: Place the piston ring on the outer edge against the stop and align the ends squarely against the grinding wheel. Apply light, even pressure against the wheel to prevent grinding too large a gap.
2. Operate the Tool: Turn the handle so the grinding wheel turns towards the inside edge of the ring (counter-clockwise when viewed from the handle side of the tool).
3. Exercise Caution: This is a diamond grinding wheel. It cuts fast!

Checking Piston Ring Gap:

1. Deburr the Ring Ends: Carefully remove any burrs on the ring ends before placing the ring in the bore. A light touch with a fine abrasive stone works well.
2. Clean the Rings: Thoroughly clean the rings with lacquer thinner or acetone, as the paint coating from the factory may occasionally scratch the cylinder bore. Always wear gloves during this process.
3. Position the Ring in the Cylinder: Place the ring squarely in the cylinder bore, about 1" down from the deck surface. An upside-down flat-top piston will help you properly square the ring.
4. Measure the End Gap: Use a feeler gauge to measure the ring's end gap. Apply light grinding pressure and check frequently to avoid making the end gap too large.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Turbosmart BMW N20 VIWG Wastegate Actuator - 6inHg is designed to enhance turbo performance and boost control on BMW N20 engines, delivering improved reliability and responsiveness. This high-quality actuator replaces the factory wastegate actuator, providing better stability and minimizing boost leaks under demanding conditions. Ideal for enthusiasts looking to optimize their BMW’s turbo efficiency, this actuator offers superior control and durability.

• Designed specifically for BMW N20 engines
• Boost control enhancement for increased performance and responsiveness
• 6inHg spring for precise pressure control
• Robust construction reduces the risk of boost leaks
• Manufactured by Turbosmart, a trusted brand in performance turbo components
• Compatible with a variety of BMW models, ensuring a perfect fit
• Available through Turner Motorsport

With Turbosmart’s high-performance design, the BMW N20 VIWG Wastegate Actuator - 6inHg is a perfect choice for drivers looking to upgrade their turbo system. This wastegate actuator is engineered for those who demand better boost stability, control, and overall performance from their vehicle.

Improve the performance and reliability of your BMW N20 2.0L engine with the BMW N20 2.0L Timing Chain Sprocket for the exhaust camshaft. This high-quality replacement part ensures precise timing and smooth operation of the exhaust camshaft, enhancing overall engine efficiency and longevity.

• Enhances engine performance and reliability
• Ensures precise timing of the exhaust camshaft
• High-quality construction for long-lasting durability
• Compatible with BMW N20 2.0L engines

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

• Precisely gaps spark plugs for enhanced engine performance and efficiency
• Speeds up the gapping process while ensuring accuracy and uniformity
• Available in two sizes (14mm and 12mm) for a wider range of compatibility
• Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
• Made in the USA for premium quality and durability

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Achieve flawless camshaft alignment on your BMW N20 and N26 engines with the Schwaben N20/N26 Timing Tool Kit. Designed to precisely align camshaft timing at the TDC position and lock the VANOS system for accurate sprocket installation, this tool set is a must-have for any timing job.

Securely stored in a durable blow-molded case, this kit is both easy to store and transport. The Schwaben N20/N26 Timing Tool Kit is a crucial addition to any professional or DIY mechanic's toolkit, ensuring the precision and dependability required for peak engine performance.

Additionally, our LIFETIME REPLACEMENT program guarantees that we will take care of any issues you may encounter with the set, so you can focus on the task at hand!

Includes:

• Camshaft Locking Tool
• Camshaft Fixating Base
• T.D.C. Alignment Pin (83300495070)
• Chain Tensioner
• M6 x P1.0 L: 130mm
• M6 x P1.0 L: 60mm
• M6 x P1.0 L: 45mm (Quantity: 2)

Other Tools Needed:

• BMW Flex Plate Lock Tool (We Suggest: T584148 - CTA N20/N26 Flywheel Holder)
• Oil Pump Lock Kit (If removing oil pump) (We Suggest: T586212 - CTA Oil Seal Repair Kit)
• 8mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 10mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 13mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 14mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 16mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 17mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 22mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 24mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 27mm Socket/Wrench (We Suggest: T361018 - 1/2" Dr. 27mm Socket)
• E6 Socket (We Suggest: T363279 - E Torx Socket Set)
• E7 Socket (We Suggest: T363279 - E Torx Socket Set)
• E8 Socket (We Suggest: T363279 - E Torx Socket Set)
• E10 Socket (We Suggest: T363279 - E Torx Socket Set)
• E20 Socket (We Suggest: T363279 - E Torx Socket Set)
• T30 Socket (We Suggest: T386445 - Torx Socket Set)
• T40 Socket (We Suggest: T386445 - Torx Socket Set)
• T45 Socket (We Suggest: T386445 - Torx Socket Set)
• 5mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)
• 8mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)

Replaces BMW OEM Tools:

• 83302212831
• 83302212830
• 83302219548
• 83300495070
• 1197340

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.