BMW Engine Parts for BMW X Series E84 (2013-2015)

Oil Filler Cap - E90 E92 E60 F10 F01 E83 F25 F70

T#:222522

Part#: 11128655331

In Stock

8% off MSRP $ 28.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.85 USD

Add to Wish List

Qty

8% off MSRP

$ 28.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.85 USD

Add to Wish List

Genuine BMW Cap For Oil Filler - 11128655331

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

Genuine BMW Gas Cap - Most BMWs 2000+

T#:2788

Part#: 16117222391

In Stock

9% off MSRP $ 40.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.69 USD

Add to Wish List

Qty

9% off MSRP

$ 40.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.69 USD

Add to Wish List

This fuel cap is an original BMW product. A faulty gas cap can often be the cause a fault code and trigger a "check engine" light.

Genuine BMW 5 Prong Salmon Relay - Multiple BMWs

T#:5390

Part#: 12631742690

In Stock

7% off MSRP $ 24.65

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.99 USD

Add to Wish List

Qty

7% off MSRP

$ 24.65

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.99 USD

Add to Wish List

This relay is used for the SMG system on the E46 M3 and various applications including secondary air systems on other BMW's. If you find that your SMG-equipped E46 M3 is not starting, this is one of the first places to check as it controls power to the hydraulic unit (the car will not start without hydraulics). Buy one to fix the issue and buy a second so you're not stranded in the future!

Show More Show Less

Genuine BMW Spark Plug (ZR5TPP33S) - N55 Engine - E82 E9X F30 F10 and...

T#:181016

Part#: 12120037582

In Stock

22% off MSRP $ 30.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.09 USD

Add to Wish List

Qty

22% off MSRP

$ 30.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.09 USD

Add to Wish List

This is an Genuine BMW High Power Spark Plug - Bosch # ZR5TPP33S. It is used on BMW's with the N55 twin scoll turbocharged 6 cylinder engine. We recommend changing spark plugs every 60,000-80,0000 miles.

This item fits the following BMWs:
2011+ E82 BMW 135i 135is
2014+ F22 BMW M235i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible - Convertible
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
2010+ F07 BMW 535i GT, 535i xDrive GT
2011+ F10 BMW 535i 535i xDrive
2012+ F12 BMW 640i
2013+ F06 BMW 640i Gran Coupe
2009+ F01 BMW 740i 740li 740li xDrive
2013+ E84 BMW X1 xDrive35i
2011+ F25 BMW X3 xDrive35i
2011-2013 E70 BMW X5 xDrive35i
2014+ F15 BMW X5 sDrive35i X5 xDrive35i
2011+ E71 BMW X6 xDrive35i

Show More Show Less

Genuine BMW Valve cover gasket - 11127587804

T#:31515

Part#: 11127587804

In Stock

24% off MSRP $ 69.31

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.00 USD

Add to Wish List

Qty

24% off MSRP

$ 69.31

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.00 USD

Add to Wish List

Genuine BMW Profile-Gasket

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Genuine BMW Oil Filter Housing Gasket, N52 N54 - 11428637821 ...

T#:224086

Part#: 11428637821

In Stock

18% off MSRP $ 47.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

18% off MSRP

$ 47.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Common point of failure is the N52/N54 Oil Filter Housing Gasket. When leaks occur here, oil can get on your belts, among other important components, causing engine failure. Replace yours today to avoid future troubles!

Genuine Bmw Gasket - 11428637821

Show More Show Less

Genuine BMW Rear Crankshaft Seal

T#:30802

Part#: 11117587168

In Stock

29% off MSRP $ 58.10

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.47 USD

Add to Wish List

Qty

29% off MSRP

$ 58.10

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.47 USD

Add to Wish List

Genuine BMW Shaft Seal - 90X110X8
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Motiv ReFlex+ for BMW

T#:17970629

Part#: RFXF02UI6

In Stock

$ 859.00 USD

Add to Wish List

Qty

$ 859.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

Genuine BMW Temperature Sensor

T#:367843

Part#: 13621433076

In Stock

16% off MSRP $ 66.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.45 USD

Add to Wish List

Qty

16% off MSRP

$ 66.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.45 USD

Add to Wish List

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Genuine BMW Oil Cooler Gasket - N54 N55 N20 S55

T#:210106

Part#: 11428637820

In Stock

16% off MSRP $ 47.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.95 USD

Add to Wish List

Qty

16% off MSRP

$ 47.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.95 USD

Add to Wish List

This gasket is known to leak from time to time and can cause an unforseen oil loss. Change it as soon as you spot a leak to prevent damage or failure.

Genuine BMW Oil Pressure Sensor

For vehicles equipped with "High Speed Synchronisation" (S840A = Yes)

T#:14866

Part#: 12617592532

In Stock

2% off MSRP $ 66.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.83 USD

Add to Wish List

Qty

2% off MSRP

$ 66.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.83 USD

Add to Wish List

This sensor is responsible for constantly monitoring the engine oil pressure and warning the driver in the event of a problem or drastic drop in pressure.

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

Ships in 2 Business Days

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

For Vehicles With Motiv ReFlex Unit Currently Installed Only

T#:22723690

Part#: 101-0212

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

Genuine BMW Crankshaft Seal - Front - N52 3.0L, N54 3.0L, N55 3.0L ...

For vehicles with a production date up to 02/2011

T#:30785

Part#: 11117547842

In Stock

7% off MSRP $ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Qty

7% off MSRP

$ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Genuine BMW Shaft Seal - 65X79X20
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F10,F12,F25 X3

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Intake Manifold Profile Gasket Set (Set of 6) - E90 E92 E...

T#:14621

Part#: 11617547242

In Stock

22% off MSRP $ 56.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.95 USD

Add to Wish List

Qty

22% off MSRP

$ 56.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.95 USD

Add to Wish List

This set of 6 gaskets is to seal the intake manifold to the cylinder head. These are absolutely crucial to prevent vacuum and intake air leaks and lean running conditions. These are also usually replaced when adding the 330 manifold to a 325, 328. Price is for a set of 6 - one for each intake runner. On cars with V8 engines 2 sets are required.

Show More Show Less

Genuine BMW Oil Filter Cap

T#:22284

Part#: 11427525334

In Stock

2% off MSRP $ 54.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

Qty

2% off MSRP

$ 54.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

If your oil filter housing cap is cracked or stripped, replace it with a fresh one from BMW.

Genuine BMW Oil Pan Gasket - Multiple BMWs

T#:22209

Part#: 11137600482

In Stock

13% off MSRP $ 71.67

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.62 USD

Add to Wish List

Qty

13% off MSRP

$ 71.67

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.62 USD

Add to Wish List

Replace your worn out and leaking oil pan gasket and avoid having to top off between oil changes.

Genuine BMW Intake Hydraulic Tappet

T#:34246

Part#: 11337548690

In Stock

9% off MSRP $ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.99 USD

Limited Qty Sale

Add to Wish List

Qty

9% off MSRP

$ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Alignment Element

Engine Rocker Arm - Grade 3

T#:34252

Part#: 11337559794

In Stock

Sale - Save 25% $ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 54.99

This product was last offered at the strikethrough price on
08-26-2026

$ 41.24 USD

Add to Wish List

Genuine BMW Roller Drag Lever - "3"
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Genuine BMW Oil Pan Bolt Set - E60/61 E70/71 E82/88 E9X F01/02 F30 Z4...

T#:31758

Part#: 11132210959

In Stock

5% off MSRP $ 71.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD

Add to Wish List

Qty

5% off MSRP

$ 71.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD

Add to Wish List

Genuine BMW oil pan bolt set that is required when replacing an oil pan gasket.

Genuine BMW Set Of Aluminium Screws - Oil pump

T#:34948

Part#: 11412165397

In Stock

$ 42.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

This kit includes all the hardware necessary for installing your BMW oil pump. These genuine BMW screws are made from aluminum to minimize corrosion and enhance durability. Genuine BMW Set Of Aluminium Screws Oil Pump - This item fits the following BMW Chassis: E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36 Fits BMW Engines including: N55

Show More Show Less

Valvetronic Actuator Replacement Kit Genuine BMW - N55 S55 3.0L ...

T#:599758

Part#: 11377603979KT1

In Stock

$ 659.99 USD

Add to Wish List

Qty

$ 659.99 USD

Add to Wish List

Valvetronic Actuator Replacement Kit

Revitalize your engine's Valvetronic system with the Valvetronic Actuator Replacement Kit. This comprehensive kit includes the Valvetronic actuator, actuator gasket, and valve cover gaskets, ensuring a complete overhaul for optimal performance. Crafted to OEM specifications, these components guarantee precise fitment and reliable functionality. Say goodbye to Valvetronic issues and restore your engine's efficiency with this all-in-one replacement kit.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

T#:29201081

Part#: 900.1008

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

Genuine BMW Front Crankshaft Seal

T#:187246

Part#: 11118618864

In Stock

28% off MSRP $ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.79 USD

Add to Wish List

Qty

28% off MSRP

$ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.79 USD

Add to Wish List

Genuine BMW Shaft Seal

Genuine BMW Engine Set Of Alu. Screws Starter 12410392577

T#:14837

Part#: 12410392577

In Stock

2% off MSRP $ 24.30

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.89 USD

Add to Wish List

Qty

2% off MSRP

$ 24.30

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.89 USD

Add to Wish List

Turner recommends replacing these bolts when replacing your starter as these bolts are aluminum and torque to yield - making them one time use bolts.

We recommend the Bosch replacement starter to get your vehicle back on the road.

Show More Show Less

Genuine BMW Power Distribution Box - E82/88 E9X

T#:10501

Part#: 61146971370

In Stock

5% off MSRP $ 127.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 120.99 USD

Add to Wish List

Qty

5% off MSRP

$ 127.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 120.99 USD

Add to Wish List

This is found on the top of the battery

Genuine BMW Valvetronic Actuator - N20 2.0L, N55 3.0L

T#:34786

Part#: 11377603979

In Stock

5% off MSRP $ 618.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 589.28 USD

Add to Wish List

Qty

5% off MSRP

$ 618.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 589.28 USD

Add to Wish List

Genuine BMW Actuator -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,S55

Show More Show Less

Genuine BMW Sky Blue Relay - Multiple BMWs

T#:21328

Part#: 61366915327

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Commonly used in multiple BMWs, usually controlling fuel pump operation.

Genuine BMW NGK SILZBR8D8S Spark Plug

T#:178162

Part#: 12120039664

In Stock

22% off MSRP $ 30.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.27 USD

Add to Wish List

Qty

22% off MSRP

$ 30.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.27 USD

Add to Wish List

NOW LOCATED UNDER T#338000

This item fits the following BMWs:
2012+ F10 BMW 528i 528i xDrive
2014+ F22 BMW 228i 228i xDrive
2014+ F23 BMW 228i 228i xDrive
2013+ F25 BMW X3 xDrive28i
2015+ F26 BMW X4 xDrive28i
2012+ F30 BMW 320i 320i xDrive 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive - Wagon
2013+ F32 BMW 428i 428i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible
2014+ F34 BMW 328i xDrive GT - Gran Tourismo
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe
2013+ E84 BMW X1 sDrive28i X1 xDrive28i
2009+ E89 BMW Z4 sDrive28i

Show More Show Less

Filler Cap - Priced Each

T#:596863

Part#: 16117470341

In Stock

$ 35.74 USD

Add to Wish List

Qty

$ 35.74 USD

Add to Wish List

Genuine BMW Hex Bolt With Washer M8X94 - 11117834142 - E60 M5,E63 M6 ...

T#:30818

Part#: 11117834142

Ships in 9 Business Days

3% off MSRP $ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Qty

3% off MSRP

$ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Upgrade Your BMW with Genuine BMW Hex Bolt With Washer M8X94 - 11117834142 - E60 M5,E63 M6

Upgrade your BMW's integrity and performance with the Genuine BMW Hex Bolt With Washer M8X94 - 11117834142 - E60 M5,E63 M6. Crafted to exacting standards, this authentic hex bolt ensures secure fastening and durability for your BMW E60 M5 or E63 M6. Engineered for precision, it offers peace of mind knowing your BMW is equipped with genuine parts. Whether you're conducting routine maintenance or performing repairs, trust Genuine BMW Hex Bolts to maintain the structural integrity and performance of your BMW.

Genuine BMW hex bolt with washer for superior quality
Crafted to exacting standards for secure fastening
Engineered for precision and durability
Enhances structural integrity of your BMW
Ideal for routine maintenance and repairs

Genuine BMW Hex Bolt With Washer - M8X94
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63

Fits BMW Engines including:
S85

Show More Show Less

Genuine BMW Oil Level Sensor - Multiple BMWs

T#:13104

Part#: 12617607910

In Stock

14% off MSRP $ 298.81

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 257.99 USD

Add to Wish List

Qty

14% off MSRP

$ 298.81

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 257.99 USD

Add to Wish List

This is the oil level sensor / sender for BMW E9X E53 E65 E70 E71 E82 E83 When this part fails it will illuminate a check light on the dash which indicates it needs to be replaced. Includes o-ring.

Genuine BMW Engine Block Fastener Set

T#:30558

Part#: 11110426591

In Stock

$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 104.80 USD

Add to Wish List

Qty

$ 104.80 USD

Add to Wish List

Genuine BMW Set Of Aluminum Screws F Compl.Crankcase
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N54,N54T,N55

Show More Show Less

Turbo Coolant Line O-Ring - Priced Each

T#:33446260

Part#: 07141696931

Ships in 4 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Genuine BMW O-Ring - 12X1.5 This item fits the following BMW Chassis: E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36 Fits BMW Engines including: N55, B58

Genuine BMW Injection Valve - 11117506546

T#:30744

Part#: 11117506546

In Stock

11% off MSRP $ 42.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.90 USD

Add to Wish List

Qty

11% off MSRP

$ 42.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.90 USD

Add to Wish List

Upgrade your BMW's performance with the Genuine BMW Injection Valve - 11117506546.

Designed for precision and reliability, this injection valve ensures optimal fuel delivery, enhancing engine efficiency and power. Trust Genuine BMW parts for seamless integration and long-lasting performance.

Enhances engine efficiency
Optimizes fuel delivery for improved performance
Genuine BMW quality ensures reliability and durability
Designed for seamless integration with BMW vehicles

Genuine BMW Injection Valve
This item fits the following BMW Chassis:
E60 M5,E63 M6,E82 1M Coupe,E63,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55,S65,S85

Show More Show Less

Motiv ReFlex+ Control Unit

T#:29101684

Part#: 900.1001

In Stock

$ 729.00 USD

Add to Wish List

Qty

$ 729.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

Genuine BMW Oil Pump Sprocket

T#:34988

Part#: 11417519870

Ships in 3 Business Days

3% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Add to Wish List

Qty

3% off MSRP

$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Add to Wish List

Genuine BMW Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Bearing Shell, Red - 11217512510

T#:32567

Part#: 11217512510

Ships on Sep 22, 2026

7% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

7% off MSRP

$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Bearing Shell, Red - 55,50Mm(+0,50)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Relay - Black

T#:14043

Part#: 61366901469

In Stock

3% off MSRP $ 24.65

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.81 USD

Add to Wish List

Qty

3% off MSRP

$ 24.65

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.81 USD

Add to Wish List

Genuine BMW Relay, Make Contact, Black
This item fits the following BMW Chassis:
E60 M5,E63 M6,E70 X5M,E71 X6M,E82 1M Coupe,E53 48IS,E39,E46,E53 X5,E63,E70 X5,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F25 X3,F26 X4,i3i12

Show More Show Less

WASHER

T#:567705

Part#: 11238090136

In Stock

5% off MSRP $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD

Add to Wish List

Qty

5% off MSRP

$ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD

Add to Wish List

Also utilized by BMW with the sprocket located in the oil pump system on N54 engines.

Genuine BMW Cylinder Head Gasket - N55

T#:22186

Part#: 11127599212

In Stock

14% off MSRP $ 233.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.09 USD

Add to Wish List

Qty

14% off MSRP

$ 233.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.09 USD

Add to Wish List

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Cylinder Head Gasket Asbestos-Free - 1,20Mm
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 2 Business Days

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

T#:29234298

Part#: 910.1011

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Belt - Serpentine Belt - F30 F32 F22 F10 +

T#:22238

Part#: 11287618848

In Stock

20% off MSRP $ 31.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.01 USD

Add to Wish List

Qty

20% off MSRP

$ 31.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.01 USD

Add to Wish List

This serpentine belt (6Pkx1003) drives the Air conditioning, Alternator, and power steering system for BMW's with the N20 N26 engines. We recommend replacing the AC / Alternator / Power Steering belt every 80,000 miles.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2014+ F22 BMW 228i 228i xDrive
2014+ F23 BMW 228i 228i xDrive
2012+ F30 BMW 320i 320i xDrive 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2013+ F32 BMW 428i 428i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible
2014+ F34 BMW 328i xDrive GT- Gran Tourismo
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe
2012+ F10 BMW 528i 528i xDrive
2011+ F25 BMW X3 xDrive28i
2015+ F26 BMW X4 xDrive28i
2009+ E89 BMW Z4 sDrive28i

Show More Show Less

Genuine BMW Timing Chain Tensioner With Guard Rail - N52 3.0L, N55 3....

T#:34073

Part#: 11317585020

In Stock

12% off MSRP $ 101.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.12 USD

Add to Wish List

Qty

12% off MSRP

$ 101.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.12 USD

Add to Wish List

Genuine BMW Chain Tensioner And Guide Rail -
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N55,S55

Show More Show Less

Genuine BMW Adapter Wiring for Battery IBS System - Multiple BMWs ...

T#:39998

Part#: 12517615476

Ships in 3 Business Days

1% off MSRP $ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD

Add to Wish List

Qty

1% off MSRP

$ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD

Add to Wish List

Connects to the IBS system for information relay to the DME via the BSD Interface.

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW X Series E84 (2013-2015)

Sub-Categories

Valvetronic Actuator Replacement Kit

Upgrade Your BMW with Genuine BMW Hex Bolt With Washer M8X94 - 11117834142 - E60 M5,E63 M6

Upgrade your BMW's performance with the Genuine BMW Injection Valve - 11117506546.

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results