BMW Engine Parts for BMW X Series E84 (2013-2015)

Dinan N-Series Performance Ignition Coil - Red - BMW M54 S54 N20 N26 ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:4908029

Part#: D650-0003

In Stock

10% off MSRP $ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Qty

10% off MSRP

$ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan N-Series Performance Ignition Coil - Blue - BMW M54 S54 N20 N26...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:4908030

Part#: D650-0004

In Stock

10% off MSRP $ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Qty

10% off MSRP

$ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan Iridium Spark Plug - N20 N54 N55 S55 N63 N63TU S63 S63TU ...

2-Steps Colder than OE plugs - For tuned, high boost, and/or upgraded turbo application...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:40579789

Part#: D640-0002

In Stock

8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

8% off MSRP

$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Dinan Iridium Spark Plugs are an excellent upgrade for tuned, and even stock engines, where applicable.* Our spark plugs are made from Iridium - one of the strongest materials available. They last longer than other materials with higher melting points, run cooler, resist preignition, and even require less voltage to produce a strong spark. The iridium electrode with its copper core is harder and stronger than other materials, can dissipate heat more easily, and is better protected from melting, cracking, and other limitations found with standard plugs. Dinan spark plugs are great for high boost, high cylinder pressure, high cylinder temperatures, and high-power situations, and they pair nicely with a set of Dinan ignition coils, where applicable. However, they are not only for tuned and higher output vehicles that may benefit from a plug cooler than the factory heat range – they also are applicable to select non-tuned / stock vehicles as well!* *N54 & N55 COMPATIBILITY: Dinan plugs are numerous steps colder than stock on both the N54 (3 steps colder) and N55 (2 steps colder) and are suggested for tuned, high boost and/or upgraded turbo applications only. They are *NOT* suggested for non-tuned stock vehicles for these speciific applications. If installed on a stock N54/N55 vehicle the plug will not reach its self cleaning temperature and be unable to burn off the combustion deposits leading to fouling, misfires, and a shorter lifespan of the plug.

Show More Show Less

BMW M54 N54 N55 Performance Ignition Coil - Red - Set Of Six ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:23880757

Part#: D650-0003KT1

In Stock

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

Boost your engine's capabilities with the Dinan N-Series Performance Ignition Coils - a vivid set of six in striking red. Precision-engineered to amplify ignition power, these coils guarantee heightened throttle response, seamless idling, and a notable surge in overall power. Meticulously crafted for durability, they seamlessly integrate into your vehicle, enhancing both performance and aesthetic appeal under the hood.

Show More Show Less

Dinan N-Series Performance Ignition Coil - Black - BMW M54 S54 N20 N2...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:4908028

Part#: D650-0002

In Stock

11% off MSRP $ 38.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.22 USD

Add to Wish List

Qty

11% off MSRP

$ 38.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.22 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Valvetronic Actuator Replacement Kit - BMW N55 S55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:599759

Part#: 11377603979KT2

In Stock

Sale - Save 10% $ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD

Add to Wish List

Qty

Sale - Save 10%

$ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD

Add to Wish List

Includes actuator, actuator gasket and valve cover gaskets

N-Series Ultimate Performance Ignition Coil - Red - Set Of Six ...

10X Entries Into Our F80 M3 Sweepstakes

T#:23714967

Part#: NSERIESIGNCOILKT

In Stock

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.

Show More Show Less

N20 N52 N54 N55 Connecting Rod Bearing Set of 2 Pairs - Std. Size ...

T#:598331

Part#: CR222SV

In Stock

$ 52.00 USD

Add to Wish List

Qty

$ 52.00 USD

Add to Wish List

Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for BMW Engines come in sets of 2 (2 Upper and 2 Lower Bearing Shells) Suitable for 2 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.

Show More Show Less

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Bav Auto Spark Plug Socket 12" x 5/8"

10X Entries Into Our F80 M3 Sweepstakes

T#:580385

Part#: B8800072

In Stock

Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD

Add to Wish List

Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

BMW N20 N52 N54 N55 Connecting Rod Bearing Set of 2 Pairs - 0.25mm Ov...

+0.25mm

T#:597151

Part#: CR222SV0.25

In Stock

$ 52.00 USD

Add to Wish List

Qty

$ 52.00 USD

Add to Wish List

BMW N20 N52 N54 N55 Connecting Rod Bearing Set of 2 Pairs - 0.25mm Oversized provides an exceptional upgrade for enhancing engine performance and reliability. Crafted by King, these bearings are engineered to withstand the rigorous demands of high-performance driving.

Premium Quality Construction: Made from lead-free, silver-based tri-metal material, offering superior durability and load-bearing capabilities.
0.25mm Oversized Design: Features an oversized specification to accommodate slight engine wear and ensure a precise fit for optimal performance.
Enhanced Engine Stability: Provides exceptional support and stability to the connecting rods, reducing wear and extending engine life.
Precision Engineering: Designed to meet exacting standards, ensuring perfect compatibility with BMW N20, N52, N54, and N55 engines.
Improved Engine Operation: Delivers smoother and more efficient engine performance, enhancing the overall driving experience.

Turner Motorsport's BMW N20 N52 N54 N55 Connecting Rod Bearing Set of 2 Pairs - 0.25mm Oversized is ideal for those seeking high-quality components to boost engine reliability and performance.

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Engine Main Bearing Kit - Standard Size

Standard Size

T#:599337

Part#: MB7776SI

In Stock

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

Burger Motorsport 4 BAR TMAP Sensor & Adapter - BMW N55/N54/S55 (2007...

T#:34885402

Part#: 4BAR TMAP

Back Ordered

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.

N55 Valve Cover OEM Elring

2X Entries Into Our F80 M3 Sweepstakes

T#:2438603

Part#: 11127570292

In Stock

$ 463.99

This product was last offered at the strikethrough price on
04-12-2026

$ 289.99 USD

Add to Wish List

Qty

$ 289.99 USD

Add to Wish List

Complete assembly with gaskets & hardware

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Bav Auto Fuel Level Sensor & Fuel Pump Lock Ring Tool - BMW & MINI ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580400

Part#: B8800089

Ships on Sep 30, 2026

Sale - Save 10% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD

Add to Wish List

Used to remove fuel level and fuel pump lock rings properly to avoid damage.

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Valvetronic Actuator Replacement Kit - N20 2.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:24212289

Part#: 11377603979N20KT

In Stock

Sale - Save 10% $ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.61 USD

Add to Wish List

Qty

Sale - Save 10%

$ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.61 USD

Add to Wish List

If your Valvetronic Actuator has failed, this kit includes a new actuator and all of the basic gaskets necessary to replace the actuator. OEM VDO Valvetronic Actuator Actuator Gasket Valve Cover Gasket

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Dinan Performance Ignition Service Kit

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:8294102

Part#: D650-0004KT5

In Stock

$ 217.99 USD

Add to Wish List

Qty

$ 217.99 USD

Add to Wish List

Failing ignition coils or plugs can cause sputtering, rough idle, hesitation on acceleration, misfires, and a check engine light.

If one of your ignition coils is bad, it is a good idea to replace the plugs to prevent future problems. Great for fixing those rusted / corroded connections.

Great for modified or Tuned cars

The kit includes:

4 Blue Dinan Coils with locks
4 NGK spark plugs
1 packet of American Grease Stick dielectric grease

These Dinan ignition coils feature:

Direct plug-and-play.
Up to 10% more energy output than stock.
Blue housing with Dinan Logo.
True upgrade, not just aesthetic.

Show More Show Less

BMW N20 N52 N54 N55 S55 Connecting Rod Bearing Set of 2 Pairs - 0.50m...

+0.50mm

T#:3929159

Part#: CR222SV0.5

In Stock at Vendor

$ 52.00

This product was last offered at the strikethrough price on
05-03-2026

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

BMW N20 N52 N54 N55 S55 Connecting Rod Bearing Set of 2 Pairs - 0.50mm Oversized is designed to elevate your engine’s performance and reliability. Developed with high-performance driving in mind, this connecting rod bearing set from Turner Motorsport offers superior durability and support. Each set includes 2 upper and 2 lower bearing shells, crafted from a lead-free, silver-based tri-metal material that is specifically engineered for extreme load applications. These bearings are meticulously designed to meet exact standards, ensuring optimal fitment and compatibility with your BMW engine, resulting in smoother and more reliable operation.

Enhanced Engine Performance: Provides superior support and stability for high-performance driving.
Durable Construction: Lead-free, silver-based tri-metal material designed for extreme loads.
Precise Fitment: Engineered to exact standards for compatibility with BMW N20, N52, N54, N55, and S55 engines.
Improved Reliability: Ensures smoother engine operation and reduced wear over time.
Complete Set: Includes 2 upper and 2 lower bearing shells for 2 connecting rods.

Show More Show Less

Elring Rear Crankshaft Seal - 11117587168 - N20 N52 N54 N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:340679

Part#: 11117587168

In Stock

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N20
N52
N54
N55
S55

Show More Show Less

BMW N20 2.0L Valve Cover Gasket Set

2X Entries Into Our F80 M3 Sweepstakes

T#:384256

Part#: 11127588418

In Stock

$ 46.99

This product was last offered at the strikethrough price on
08-03-2026

$ 46.97 USD

Add to Wish List

Qty

$ 46.97 USD

Add to Wish List

Bav Auto Crankshaft Front Oil Seal Removal / Installer Tool - N54, N5...

10X Entries Into Our F80 M3 Sweepstakes

T#:580444

Part#: B8800139

Ships on Sep 30, 2026

Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.

N-Series Performance Black Ignition Coils - Set Of Six

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:20815175

Part#: D650-0002KT1

In Stock

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

For BMW M54 applications, coil styles vary between M or N depending on the vehicle's production date. Models produced up to September 2002 require the M series style coil, while those manufactured after September 2002 use N series style coils. It's crucial to visually compare and verify the correct coil needed for your vehicle before making a purchase.

Benefits:

Specific coil styles for different BMW M54 application dates
Helps ensure the right replacement part for your vehicle's coil
Visual verification recommended prior to purchase for compatibility

Show More Show Less

Engine Main Bearing Kit - Size 0.25 Oversized

+0.25mm

T#:597154

Part#: MB7776SI0.25

In Stock

$ 118.99 USD

Add to Wish List

Qty

$ 118.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

Elring Crankshaft Seal - Front

For vehicles with a production date up to 02/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:362853

Part#: 11117547842

In Stock

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

65x79x10 - Usually replaced when servicing the timing chains

N20/N26 Complete Timing Chain Kit - BMW N20 RWD

10X Entries Into Our F80 M3 Sweepstakes

T#:21012589

Part#: N20N26TIMINGCHAI

Ships in 6 Business Days

Sale - Save 5% $ 780.99

This product was last offered at the strikethrough price on
06-12-2026

$ 743.00 USD

Add to Wish List

Qty

Sale - Save 5%

$ 780.99

This product was last offered at the strikethrough price on
06-12-2026

$ 743.00 USD

Add to Wish List

Eliminate N20/N26 Timing Chain Woes with Our Comprehensive Kit – Get Your BMW Back on Track!

Bav Auto Fuel Injector Removal/Installation Tool - N55

For E - Chassis N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580388

Part#: B8800075

In Stock

Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55

10X Entries Into Our F80 M3 Sweepstakes

T#:580414

Part#: B8800107

Ships on Oct 20, 2026

Sale - Save 5% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD

Add to Wish List

Qty

Sale - Save 5%

$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD

Add to Wish List

Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.

Show More Show Less

N20 Timing Chain Rebuild Kit - F22/23 F3X N20 2.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:23913961

Part#: N20TMGKT

Ships in 7 Business Days

Sale - Save 8% $ 387.41

This product was last offered at the strikethrough price on
05-03-2026

$ 357.74 USD

Add to Wish List

Qty

Sale - Save 8%

$ 387.41

This product was last offered at the strikethrough price on
05-03-2026

$ 357.74 USD

Add to Wish List

Contains all the required components for the replacement of your N20 engine's timing chain. Kit includes: All required Gaskets and seals Camshaft timing chain tensioners with retaining clips Timing chain tensioner for crankshaft to camshaft with sealing washer Timing chain guide rails Timing chain 2 Gallons BMW coolant Replacement oil filter with associated o-ring. 6 quarts BMW High Performance 5w30 Synthetic oil

Show More Show Less

OEM Elring Cylinder Head Gasket Set - N20 2.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:2602233

Part#: 11127588418S

In Stock

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

A leaky valve cover gasket and other cylinder head gaskets make a mess of your engine, your garage, and allows the life-blood of your engine to escape. Replace leaky gaskets and always start with a fresh gasket after valve cover removal.

Show More Show Less

Connecting Rod Bearing Set of 2 Pairs - 0.75mm Oversized

+0.75mm

T#:4840521

Part#: CR222SV0.75

In Stock

$ 33.99

This product was last offered at the strikethrough price on
08-13-2026

$ 32.79 USD

Add to Wish List

Qty

$ 32.79 USD

Add to Wish List

Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for BMW Engines come in sets of 2 (2 Upper and 2 Lower Bearing Shells) Suitable for 2 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.

Show More Show Less

Bav Auto Fuel Injector Installer / Remover - N20/N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580389

Part#: B8800076

Ships on Oct 20, 2026

Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD

Add to Wish List

This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel ...

T#:21933055

Part#: N54PIIMINJECT

In Stock

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

In Stock

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

THINKOBD 100

T#:2302720

Part#: 301050512

Ships in 1 day

14% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Qty

14% off MSRP

$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

This THINKOBD 100 obd2 car code reader can fast scan and clear trouble codes, even a beginner can use this unit to read the error code.

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

10X Entries Into Our F80 M3 Sweepstakes

T#:580445

Part#: B8800140

In Stock

Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.

Replacement Valve Cover - N20

2X Entries Into Our F80 M3 Sweepstakes

T#:2438616

Part#: 11127588412

In Stock

$ 393.99

This product was last offered at the strikethrough price on
05-07-2026

$ 234.99 USD

Add to Wish List

Qty

$ 234.99 USD

Add to Wish List

Replacement Valve cover

Valve Cover Kit - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:5376284

Part#: 11127570292TKT

In Stock

Sale - Save 5% $ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD

Add to Wish List

Qty

Sale - Save 5%

$ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD

Add to Wish List

If your valve cover has become cracked or warped, replace it with this Hamburg Tech cover from Turner Motorsport to prevent leaks and further valvetrain damage. Replace your leaking valve cover to keep your oil inside the engine, where it belongs. Includes everything needed to install a new valve cover: Valve cover Gasket flange Crank case vent hose Hardware

Show More Show Less

King Performance BMW N54B30A/N55B30A Rod Bearings - 2 Pairs

T#:25706094

Part#: CR222GPC

In Stock

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a Silver base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. This kit includes a full set of bearing shells!

Show More Show Less

Bav Auto Media Blaster Kit - BMW N20 N54 N55

10X Entries Into Our F80 M3 Sweepstakes

T#:582473

Part#: B1100008

In Stock

Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Qty

Sale - Save 8%

$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.

Show More Show Less

Vargas Ignition Coil Kit (Red) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309610

Part#: VTT-COIL-N5X-RED

Ships in 10 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Vargas Ignition Coil Kit (Blue) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309605

Part#: VTT-COIL-N5X-BLU

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Wastegate Actuator With Hardware - N20 2.0L Engine

10X Entries Into Our F80 M3 Sweepstakes

T#:5416783

Part#: 11657638783TMSKT

In Stock

Sale - Save 13% $ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD

Add to Wish List

Qty

Sale - Save 13%

$ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD

Add to Wish List

Located on the exhaust manifold, includes new mounting hardware. The wastegate actuator releases excess boost pressure. A failed unit may result in a boost leak, reduced performance, and, ultimately, turbocharger failure. If your wastegate actuator has failed, replace it with this OEM part from Turner Motorsport to restore performance and prolong engine life.

Show More Show Less