BMW Engine Parts for BMW X Series E84 (2013-2015)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Arc Terminator - Corporate Logo
T#:28304525
Part#: EKP-HW05-E-SF
Ships in 1-3 days
$ 199.99 USD
Free Shipping on orders $49 and up
Arc Terminator now offers upgraded EKMP3 Fuel Pump Control Modules featuring a 22 Amp INCREASE in maximum current capacity over an OEM EKPM3. This allows for more current to be supplied to your low-pressure fuel pump (LPFP) without risking thermal overload, which often leads to your car shutting down. This means that you won't have to worry about being stranded on the side of the road while waiting for your EKP module to cool down, especially when you've installed a large low-pressure fuel pump such as a Walbro 525lph. How does the integrated automatic cooling work? The integrated automatic cooling works by us installing a thermal activation switch directly onto the new half bridge IC. When the half bridge IC reaches 50°C, the 40mm fan will turn on and keep running until the IC is below 50°C or until the EKMP3 stops receiving power. I have an EKPM2, can I upgrade to this? Yes. You can upgrade to this. We recommend using the HW05 and below module. You will need to code it in order for it to function properly. Can I run more than 1 low-pressure fuel pump off of this module? No. We do not recommend that you use more than one low-pressure fuel pump with any EKP module due to the factory wiring supplying power to the EKP Module is only 12 gauge, which is not rated for the type of power demands that two low-pressure fuel pumps would require.
Show More Show Less
OEM Bosch Fuel Injector - EU6 Designation - N20/26 N55
For vehicles with production date from 07/2013 For vehicles with production date from 07/2012
Bosch - Corporate Logo
T#:585581
Part#: 13648625397
In Stock
$ 133.99

This product was last offered at the strikethrough price on
06-22-2026

$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping
Replace your clogged or malfunctioning fuel injector with this Genuine BMW injector to restore proper engine idling and running conditions. Ensure that you need injector with EU6 designation before purchase. This fuel injector will not work with earlier EU5 version fuel rails and injector; non-exchangeable Replaces Genuine BMW part # 13648625397 and requires BMW part # 13537577649 for installation.
Show More Show Less
Bav Auto Spark Plug Socket 12" x 5/8"
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580385
Part#: B8800072
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.

Motiv Motorsports - Corporate Logo
T#:17970629
Part#: RFXF02UI6
In Stock
$ 859.00 USD
Free Shipping on orders $49 and up
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less

Motiv Motorsports - Corporate Logo
T#:28537533
Part#: 101-0216
In Stock
$ 105.00 USD
Free Shipping on orders $49 and up

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

  • Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
  • Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
  • Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
  • High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less
BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness
For Vehicles With Motiv ReFlex Unit Currently Installed Only
Motiv Motorsports - Corporate Logo
T#:22723690
Part#: 101-0212
In Stock
$ 49.00 USD
Free Shipping on orders $49 and up
$ 49.00 USD
Free Shipping on orders $49 and up

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

  • Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
  • Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
  • Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
  • No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

OEM Bosch Fuel Injector - N55 N20 Engine - EU5 Designation
For vehicles with production date up to 07/2012
Bosch - Corporate Logo
T#:384546
Part#: 13647597870
In Stock
$ 165.99

This product was last offered at the strikethrough price on
05-11-2026

$ 132.99 USD
Free Shipping
$ 132.99 USD
Free Shipping
Replace your clogged or malfunctioning fuel injector with this Genuine BMW injector to restore proper engine idling and running conditions. Ensure that you need injector with EU5 designation before purchase. This fuel injector will not work with later EU6 version fuel rails and injector; non-exchangeable. Replaces Genuine BMW part # 13647597870 and requires BMW part # 13537577649 for installation.
Show More Show Less
Bremi - Corporate Logo
T#:340576
Part#: 12131712219
Ships in 2 Business Days
$ 28.78

This product was last offered at the strikethrough price on
04-09-2026

$ 25.43 USD
Free Shipping on orders $49 and up
$ 25.43 USD
Free Shipping on orders $49 and up
Get your engine back to peak performance with a new ignition coil.

Bav Auto Tools - Corporate Logo
T#:580400
Part#: B8800089
Ships on Sep 29, 2026
Sale - Save 10% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD
Free Shipping on orders $49 and up
Used to remove fuel level and fuel pump lock rings properly to avoid damage.

Bosch - Corporate Logo
T#:558831
Part#: 12317561939
In Stock
$ 61.91 USD
Free Shipping on orders $49 and up

Ensure the correct voltage is being sent to/from the alternator, keep you electrical system safe from excessive voltage peaks that could cause damage to sensitive electronics and blow out fuses. Bosch's high quality unit will give you peace of mind knowing the electrical system will be safe and the voltage will remain steady. OEM replacement for BMW part # 12317561939

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Crank Bolt Capture Plate - BMW N55, S55
2X Entries Into Our F80 M3 Sweepstakes
034Motorsport - Corporate Logo
T#:48815416
Part#: 034-113-Z016
In Stock
Sale - Save 15% $ 78.00

This product was last offered at the strikethrough price on
08-17-2026

$ 66.69 USD
Free Shipping
Sale - Save 15%
$ 78.00

This product was last offered at the strikethrough price on
08-17-2026

$ 66.69 USD
Free Shipping
Ease your mind and the strain on your N55 or S55's crank bolt by replacing it with this improved capture plate.
Bosch - Corporate Logo
T#:591891
Part#: 13537620946
In Stock
$ 101.99

This product was last offered at the strikethrough price on
03-17-2026

$ 57.99 USD
Free Shipping on orders $49 and up
$ 57.99 USD
Free Shipping on orders $49 and up
A vital component for high pressure fuel system function


Motiv Motorsports - Corporate Logo
T#:29201081
Part#: 900.1008
In Stock
$ 200.00 USD
Free Shipping on orders $49 and up

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

  • Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
  • Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
  • Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
  • Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
  • Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less
New OEM Bosch Starter Motor - N52, N54, N55, up to 03/11
For vehicles with production date up to 03/2011
Bosch - Corporate Logo
T#:394329
Part#: SR0492N
In Stock
$ 255.99

This product was last offered at the strikethrough price on
03-17-2026

$ 237.99 USD
Free Shipping
$ 237.99 USD
Free Shipping

If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. OEM replacement for the original BMW part # 12411312104 and 12411312130. This is a NEW, not used, component with no included core charge!

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

We recommend replacing hardware when doing your starter, since the bolts are aluminum and threads become stretched: Genuine BMW aluminum starter hardware set 12410392577 

 

Used on a wide variety of models with the BMW N52, N54, and N55 engines, including: E9X, F01/02, F07/10, E8X, E70, E60/61, F25, F30, and Z4.

Show More Show Less
OEM Bosch Fuel Injector - EU5 Designation - E70/71 E82/88 E9X F07/10,...
For vehicles with EU5 injectors and a production date up 01/2011
Bosch - Corporate Logo
T#:585575
Part#: 13537568607
In Stock
$ 185.99

This product was last offered at the strikethrough price on
04-21-2026

$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Rough idle, misfire, or check engine light are a common problem when you have faulty fuel injectors. Fuel injectors for turbocharged BMWs have been a common failure item. Replace your injectors with this brand new injector from BMW to restore power and proper engine operation. EU5 Designation This is a replacement for Genuine BMW part # 13537568607. Requires BMW part # 13537577649 as well prior to installation for each injector.
Show More Show Less

Bav Auto Tools - Corporate Logo
T#:580444
Part#: B8800139
Ships on Sep 29, 2026
Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Sale - Save 5%
$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.

Bav Auto Fuel Injector Removal/Installation Tool - N55
For E - Chassis N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580388
Part#: B8800075
In Stock
Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
Sale - Save 20%
$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.
Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580414
Part#: B8800107
Ships on Oct 19, 2026
Sale - Save 5% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sale - Save 5%
$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.
Show More Show Less

OEM Bosch High-Pressure Fuel Pump & Fuel Filter - N55 3.0L
For vehicles with a production date from 03/2014 - Also fits models up to 03/2014 with ...
Bosch - Corporate Logo
T#:568683
Part#: 13518604231
In Stock
$ 311.99 USD
Free Shipping
$ 311.99 USD
Free Shipping
This is Bosch's updated high pressure fuel pump "HPFP" for BMW's with the N55 turbo engine. This fuel pump is the OEM equivalent to BMW part number 13518604231 and supersedes BMW part number 13517610761. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Motiv Motorsports - Corporate Logo
T#:29101684
Part#: 900.1001
In Stock
$ 729.00 USD
Free Shipping on orders $49 and up
The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.
Show More Show Less

Motiv Motorsports - Corporate Logo
T#:29234298
Part#: 910.1011
In Stock
$ 479.00 USD
Free Shipping on orders $49 and up
The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.
Show More Show Less

Bav Auto Fuel Injector Installer / Remover - N20/N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580389
Part#: B8800076
Ships on Oct 19, 2026
Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
Sale - Save 10%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.
Bosch - Corporate Logo
T#:384620
Part#: 13518604229
In Stock
$ 194.99

This product was last offered at the strikethrough price on
04-13-2026

$ 192.99 USD
Free Shipping on orders $49 and up
$ 192.99 USD
Free Shipping on orders $49 and up

*Brand new HPFP - No Core Charge!*

The High Pressure Fuel Pump (HPFP) is a point of weakness in many BMW engines and fuel systems. If this goes it will prevent your car from running or starting due to fuel starvation. Restore your fuel system's operation with high quality OEM Bosch fuel pump.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMW's:
F2X BMW
228i/iX
F3X BMW 320i/iX 328i/iX 420i/iX 428i/iX
F10 BMW 528i/iX
E84 BMW X1 28i/iX
F25 BMW X3 28i/iX
F26 BMW X4 28iX
F15 BMW X5 40eX
E89 BMW Z4 28i

Show More Show Less
Bav Auto Fuel Injector Seal Installer & Remover - N54/N63
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580445
Part#: B8800140
In Stock
Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
Sale - Save 3%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.


Bav Auto Media Blaster Kit - BMW N20 N54 N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:582473
Part#: B1100008
Ships on Sep 29, 2026
Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Sale - Save 8%
$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.
Show More Show Less
Motiv Motorsports - Corporate Logo
T#:29500156
Part#: 200.1105
In Stock
$ 24.00 USD
Free Shipping on orders $49 and up
Quick disconnect adapters (QDA) are commonly used to adapt different components into vehicle fuel systems without requiring permanent modification. These adapters are machined from high-grade aluminum and anodized for corrosion resistance. QDAs incorporate Viton© o-rings which are compatible with most types of fuel, solvents and oils. QDAs maintain a reliable leak-proof seal under normal fuel injection system operating pressures. This particular QDA is sized perfectly to adapt right between the fuel line you were going to connect to your ethanol sensor. 3/8" (9.5mm) female quick disconnect 3/8" (9.5mm) male quick disconnect 1/8" Female pipe thread port * Viton© o-rings Crecent-lock system E-85 compatible Black anodized aluminum
Show More Show Less
Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 750cc - ...
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...
Bosch - Corporate Logo
T#:36947243
Part#: 501-0028
In Stock
$ 409.99 USD
Free Shipping on orders $49 and up
$ 409.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less

Bav Auto Tools - Corporate Logo
T#:580412
Part#: B8800104
In Stock
Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
Sale - Save 5%
$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.

Bav Auto Tools - Corporate Logo
T#:580431
Part#: B8800124
Ships on Sep 29, 2026
Sale - Save 15% $ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
Sale - Save 15%
$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
For installation and removal of pressure springs on intermediate levers of valve train. Ensures quick, easy and safe handling of these high force springs.
Motiv Motorsports - Corporate Logo
T#:29201083
Part#: 900.1016
Ships Today
$ 95.00 USD
Free Shipping on orders $49 and up
A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal
Show More Show Less

Bav Auto Oil Filter Housing Cap Removal Tool - 1/2" Drive
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580338
Part#: B8800006
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Used to easily remove your oil filter housing cap without damaging it.
Bav Auto Torx head bolt socket - E12
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580351
Part#: B8800022
Ships on Sep 29, 2026
Sale - Save 25% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
This special long, thin, Torx socket is required for removal and installation of the head bolts on most BMWs with twin-cam cylinder heads. 1/2" drive

Bosch - Corporate Logo
T#:384615
Part#: 11787589121
In Stock
$ 197.99

This product was last offered at the strikethrough price on
05-07-2026

$ 147.99 USD
Free Shipping
$ 147.99 USD
Free Shipping
Fuel control and emissions sensor

Arc Terminator - Corporate Logo
T#:28304530
Part#: EKP-HW05-E-NF
In Stock
$ 229.99 USD
Free Shipping on orders $49 and up
Arc Terminator now offers upgraded EKMP3 Fuel Pump Control Modules featuring a 22 Amp INCREASE in maximum current capacity over an OEM EKPM3. This allows for more current to be supplied to your low-pressure fuel pump (LPFP) without risking thermal overload, which often leads to your car shutting down. This means that you won't have to worry about being stranded on the side of the road while waiting for your EKP module to cool down, especially when you've installed a large low-pressure fuel pump such as a Walbro 525lph. Includes 40mm Noctua Silent Fan! How does the integrated automatic cooling work? The integrated automatic cooling works by us installing a thermal activation switch directly onto the new half bridge IC. When the half bridge IC reaches 50°C, the 40mm fan will turn on and keep running until the IC is below 50°C or until the EKMP3 stops receiving power. I have an EKPM2, can I upgrade to this? Yes. You can upgrade to this. We recommend using the HW05 and below module. You will need to code it in order for it to function properly. Can I run more than 1 low-pressure fuel pump off of this module? No. We do not recommend that you use more than one low-pressure fuel pump with any EKP module due to the factory wiring supplying power to the EKP Module is only 12 gauge, which is not rated for the type of power demands that two low-pressure fuel pumps would require.
Show More Show Less
Bosch - Corporate Logo
T#:397340
Part#: 11787596924
In Stock
$ 163.84

This product was last offered at the strikethrough price on
05-19-2026

$ 162.15 USD
Free Shipping
$ 162.15 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

Show More Show Less
Single Injector Replacement Kit
For vehicles with production date up to 07/2012
Bosch - Corporate Logo
T#:590987
Part#: 13647597870SKT
In Stock
$ 194.49

This product was last offered at the strikethrough price on
05-11-2026

$ 162.14 USD
Free Shipping
$ 162.14 USD
Free Shipping


Bosch - Corporate Logo
T#:384616
Part#: 11787589122
In Stock
$ 168.99

This product was last offered at the strikethrough price on
05-07-2026

$ 111.99 USD
Free Shipping
$ 111.99 USD
Free Shipping

A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary.

This is the OEM Bosch oxygen sensor for BMW's with the N20 and N26 motors. This sensor is mounted in the catalytic converter in the rear most position. OEM replacement for BMW # 11787589122.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
All models with the N20 or N26 motor

Show More Show Less
Bosch - Corporate Logo
T#:590992
Part#: 13648625397SKT
In Stock
$ 162.99

This product was last offered at the strikethrough price on
06-22-2026

$ 139.99 USD
Free Shipping
$ 139.99 USD
Free Shipping

BMW N20 N55 Single Injector Replacement Kit is an essential upgrade for maintaining optimal engine performance. Designed to replace faulty injectors and ensure smooth operation, this kit from Turner Motorsport offers a reliable solution for BMW vehicles. It’s crucial to visually inspect the numbers on your existing injectors to confirm proper fitment before installation.

  • Comprehensive Kit: Includes 1 EU-6 injector, 1 decoupling ring, and 1 gasket ring for a complete replacement.
  • Enhanced Performance: Replaces malfunctioning injectors to restore engine efficiency and drivability.
  • Easy Installation: Designed for straightforward installation with included components.
  • Quality Assurance: Turner Motorsport provides high-quality parts to ensure durability and long-lasting performance.

Turner Motorsport’s BMW N20 N55 Single Injector Replacement Kit helps maintain engine performance and reliability by providing essential components for injector replacement.

Show More Show Less
Density Line Motor Mount - Left - N52/N54/N55
2X Entries Into Our F80 M3 Sweepstakes
034Motorsport - Corporate Logo
T#:388771
Part#: 034-509-0054-SD
In Stock
Sale - Save 15% $ 132.00

This product was last offered at the strikethrough price on
08-17-2026

$ 112.86 USD
Free Shipping
Sale - Save 15%
$ 132.00

This product was last offered at the strikethrough price on
08-17-2026

$ 112.86 USD
Free Shipping
Engine mounts made of dense material for BMWs that have N54 and N55 engines. 034Motorsport's Density Line Mounts raise the bar for both comfort and performance. We have improved our mounts to enhance their performance. They are made from durable rubber that lasts a long time and performs well while still being comfortable to use. Density Line Mounts are made to have no gaps or fluids which eliminates the looseness that you often find in factory mounts. This change results in improved gear shifting and better overall driving performance.
Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 950cc - ...
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...
Bosch - Corporate Logo
T#:47679242
Part#: 501-0082
In Stock
Sale - Save 7% $ 572.99

This product was last offered at the strikethrough price on
08-25-2026

$ 530.02 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 572.99

This product was last offered at the strikethrough price on
08-25-2026

$ 530.02 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less

Walnut Shell Blast Media (18/40 Fine Grade) - 50 lbs
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:582690
Part#: B1100050
In Stock
Sale - Save 15% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD
Sale - Save 15%
$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD
Used for carbon buildup removal during walnut shell blasting
Fuel-It! - Corporate Logo
T#:403509
Part#: BMW-S1LPFP-CK
Ships in 1 Business Day
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.

Spool Performance - Corporate Logo
T#:9642131
Part#: SP-54HX-1-N55
Ships in 4 Business Days
$ 849.00 USD
Free Shipping
$ 849.00 USD
Free Shipping
Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The early N55 high-pressure pump is a very capable and over-engineered piece of hardware. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in early N55 fuel systems without the complexity of a secondary port injection system.
Show More Show Less
Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1600cc -...
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...
Bosch - Corporate Logo
T#:43041714
Part#: 501-0114
Ships in 9 Business Days
$ 1,040.99 USD
Free Shipping on orders $49 and up
$ 1,040.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less

Bav Auto Ratcheting Serpentine Belt Wrench Kit
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580390
Part#: B8800077
In Stock
Sale - Save 10% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD
Free Shipping on orders $49 and up
Used to retract your serpentine belt tensioner. This kit includes 18mm, 5/8 in, 14mm, 13mm, 12mm, sockets and 3/8 in and 1/4 in drive adapters

Motiv Motorsports - Corporate Logo
T#:29267521
Part#: 900.1025
In Stock
$ 150.00 USD
Free Shipping on orders $49 and up
Factory fuel lines are often not designed or safe for use with ethanol based fuels. Our PTFE fuel lines are the perfect solution for installing into your vehicle without having to permanently modify your vehicle's fuel lines. Simply uninstall the factory line and install our pre-measured lines that come setup with the correct fittings for a plug-n-play install in your vehicle. Please Note: This does NOT include an ethanol Content Sensor.
Show More Show Less
Ignition Projects - Corporate Logo
T#:1637692
Part#: IP-A122409
Ships in 5 Business Days
$ 695.00 USD
Free Shipping
$ 695.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less
Fuel-It! - Corporate Logo
T#:403249
Part#: FILPFPK1
Ships in 1 Business Day
Starting at $ 199.99 USD
Free Shipping
Starting at $ 199.99 USD
Free Shipping

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

  • SAE J30R10 E85 compatible fuel line
  • 14ga fuel resistant wiring harness
  • Quick connect female bullet connectors (2)
  • Vent tube replacement clip
  • Nylon cable ties (10)
  • Stainless steel lock nuts (2)
  • 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
  • Pushlock pump retention fittings (2)
  • 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

    *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

    ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less


Motiv Motorsports - Corporate Logo
T#:29234311
Part#: 900.1013
Ships in 4 Business Days
$ 155.00 USD
Free Shipping on orders $49 and up
Required when installing a Motiv ReFlex Lite to your inline-6 powered BMW! Includes x6 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!
Motiv Motorsports - Corporate Logo
T#:29101668
Part#: 910.1001
Ships in 4 Business Days
$ 849.00 USD
Free Shipping on orders $49 and up
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less