Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E84 Fuel System Parts

BMW E84 Fuel System Parts Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.
You're currently viewing parts for your (E84) X1 Series 2013+. Reset your chassis
For accurate results, specify your model below.
OEM Bosch Fuel Injector - N55 BMW Engine - EU5 Designation

Requires BMW part # 13537577649 for installation.

Ensure that you need injector with EU5 designation before purchase. This fuel injector will not work with later EU6 version fuel rails and injector; non-exchangeable.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their exacting assembly process and high level of durability you can expect a long service life from all Bosch products.

Bosch
Part #: 13647597870
Price: $100.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

  • Trade-in: (Domestic and Canada)
    • This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit.
  • Trade-in: (Euro)
    • This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit.
  • New Build:
    • This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings.  No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only)

All three options include the following:

  • A complete plug and play solution by simply replacing your stock bucket.  However, to utilize the secondary, an additional wiring harness must be installed.
  • Two new E85 compatible Walbro 450 pumps
  • Two new Walbro filters
  • A custom fitting that is tuned to optimize the venturi and pump output
  • Spare vent tube clip
  • Wiring harness for the secondary
  • Flow testing prior to shipping
  • Recommended Accessories:
    • Lock Ring Removal Tool
    • Return line fitting
      • This option is for those customers that will be running an external fuel pressure regulator (FPR).  You will need this to install your return line from the FPR to the tank.
    • Hobb's Switch
      • This option is for those customers that will be using a boost referenced switch to trigger the secondary on their Stage 3 pump. 

LEASE CONTACT US WITH ANY QUESTIONS YOU HAVE at info@fuel-it.com!

*To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning)

-Due to the different configurations available for Stage 3, these kits will be built after the order is placed and will ship within 3 business days.

- All Stage 3 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

  • Trade-in: (Domestic and Canada)
    • This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit.
  • Trade-in: (Euro)
    • This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit.
  • New Build:
    • This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings.  No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only)

All three options include the following:

  • A complete plug and play solution by simply replacing your stock bucket.  However, to utilize the secondary, an additional wiring harness must be installed.
  • Two new E85 compatible Walbro 450 pumps
  • Two new Walbro filters
  • A custom fitting that is tuned to optimize the venturi and pump output
  • Spare vent tube clip
  • Wiring harness for the secondary
  • Flow testing prior to shipping
  • Recommended Accessories:
    • Lock Ring Removal Tool
    • Return line fitting
      • This option is for those customers that will be running an external fuel pressure regulator (FPR).  You will need this to install your return line from the FPR to the tank.
    • Hobb's Switch
      • This option is for those customers that will be using a boost referenced switch to trigger the secondary on their Stage 3 pump. 

LEASE CONTACT US WITH ANY QUESTIONS YOU HAVE at info@fuel-it.com!

*To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning)

-Due to the different configurations available for Stage 3, these kits will be built after the order is placed and will ship within 3 business days.

- All Stage 3 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.

 

Fuel-It!
Part #: FILPFPK3
Price: $1249.95 (USD) 
Direct Ship
Fuel-It! Low Pressure Fuel Pump Upgrade Stage 1 - N54/55 E-Series

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

  • SAE J30R10 E85 compatible fuel line
  • 14ga fuel resistant wiring harness
  • Quick connect female bullet connectors (2)
  • Vent tube replacement clip
  • Nylon cable ties (10)
  • Stainless steel lock nuts (2)
  • 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
  • Pushlock pump retention fittings (2)
  • 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

    *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

    ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Fuel-It!
Part #: FILPFPK1
Price: $199.00 (USD) 
Direct Ship
OEM Bosch High-Pressure Fuel Pump & Fuel Filter - 13518604229 - BMW N20/N26 Engine

*Brand new HPFP - No Core Charge!*

The High Pressure Fuel Pump (HPFP) is a point of weakness in many BMW engines and fuel systems. If this goes it will prevent your car from running or starting due to fuel starvation. Restore your fuel system's operation with high quality OEM Bosch fuel pump.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMW's:
F2X BMW
228i/iX
F3X BMW 320i/iX 328i/iX 420i/iX 428i/iX
F10 BMW 528i/iX
E84 BMW X1 28i/iX
F25 BMW X3 28i/iX
F26 BMW X4 28iX
F15 BMW X5 40eX
E89 BMW Z4 28i

Bosch
Part #: 13518604229
Price: $249.95 (USD) 
In Stock
Quantity:   
Fuel-It! E-Series Direct Port Meth Injection Kit - E-Series N54/N55

Are you running meth or planning to run meth but want better control, distribution, and additional capacity?  If so, this kit is for you. 

Our Direct Port Meth Injection (DPMI) kits have six individually controlled methanol compatible injectors that are boost and RPM referenced so the days of on/off meth control or trying to control meth flows by varying the power signal to the pump are gone.

What is direct port meth injection?

Direct port meth injection is a kit that is installed between your intake manifold and the cylinder head to provide you with better control and more flow potential to each individual cylinder.  If you are currently running meth this provides more accurate distribution and control than standard charge pipe injection.  In addition, our standard kit will connect to your existing 1/4" methanol line if it's already installed.

What does the kit include?

Our DPMI it includes the following:

  • Direct Port Methanol Injection Spacer featuring:
    • 100% Billet aluminum construction
    • Anodized aluminum hardware for compatibility with methanol
    • Six 500cc methanol compatible injectors
    • Additional ports on the methanol rail to supply charge pipe injection should you choose
  • Six OEM gaskets to install the new spacer
  • Seven extended bolts to mount the spacer and intake manifold
  • 36" Stainless Steel braided -6an methanol line
  • -6an to 1/4" tube adapter

What additional components will I need?  (If you don't currently have a methanol kit, we'd suggest purchasing one from Burger Tuning)

  • Methanol tank
  • Methanol pump
  • FSB (Pump controller)
  • 1/4" methanol line
  • Methanol Port Injection Controller

Do I need a solenoid?

No, not for a standard installation.  If you wish to run a small meth nozzle in the charge pipe for IAT suppression, you can do so with the addition of a solenoid, meth line, adapter at the meth rail, and nozzle in the charge pipe.  If you choose to do this, we'd recommend a very small nozzle such as a CM5 or CM7. 

Will this fit my car?

If you are driving an E-Series N54 or N55, yes. 

 

*These kits are available for off-road use only

*All Direct Port Methanol Injection kits are built to order.

Fuel-It!
Part #: BMW-EDPMI
Price: $1199.95 (USD) 
Direct Ship
Quantity:   
Fuel-It! Series Port Injection Kit - N54/55 E Series

Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?

Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.

What is port injection?

Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of.  It's a relatively easy system to install and does not require any permanent modification to your car.

Port injection kits are offered in five different packages to meet your needs:

Base port injection kit: (included in Bronze, Silver or Platinum Kits)

  • Fuel-It! custom black anodized spacer for the intake manifold
  • Fuel-It! custom black anodized fuel rail
  • Black anodized aluminum and stainless steel hardware
  • Dual fuel supply port for those that are running inlets in the stock location (email us for info)
  • Optional return port for those that will be running an upgraded fuel pressure regulator 
  • Six of the following:
    • Flow matched Bosch injectors (52#)
    • Extended length steel bolts for mounting your new spacer 
    • BMW OEM gaskets

Bronze kit includes:

  • Base port injection kit
  • Basic fuel line connection kit
    • Two custom Fuel-It! fittings to maintain your stock fuel line connections at the HPFP and the feed line as it enters the engine bay
    • -6an (3/8") upgraded fuel lines
    • High flow custom Fuel-It! "Y" adapter
    • -6an fuel rail connection

Silver kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line

Platinum kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line​
  • Integrated ethanol sensor​
  • Bluetooth and JB4 compatible ethanol analyzer
    • JB4 integration compatible 0-5volt
    • Bluetooth (iPhone or Android app must be purchased to use this feature)

*These kits are available for off-road use only

*All port injection kits are built to order.

*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.

Fuel-It!
Part #: FIEPIK1
Price: $1299.95 (USD) 
Direct Ship
Genuine BMW High Pressure Fuel Pump with Fuel Filter - N55 - 135i, 335i, 535i This is the updated high pressure fuel pump for BMW's with the N55 turbo engine.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
3/2012-2013 E82 BMW 135i 135is
2014+ F22 BMW M235i M235i xDrive
2014+ F23 BMW M235i
3/2012-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
3/2012-2013 E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
3/2012-+ F07 BMW 535i GT, 535i xDrive GT
3/2012-3/2012+ F10 BMW 535i 535i xDrive
3/2012+ F12 BMW 640i 640i xDrive
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
3/2012-+ F01 BMW 740i 740li 740li xDrive
2013+ E84 BMW X1 xDrive35i
4/2012-2013 E70 BMW X5 xDrive35i
4/2012-2013 E71 BMW X6 xDrive35i br>2014+ F15 BMW X5 sDrive35i X5 xDrive35d X5 xDrive35i X5 xDrive50i
2015+ F16 BMW X6 sDrive35i X6 xDrive35i X6 xDrive50i
4/2012+ F25 BMW X3 xDrive28i X3 xDrive28d X3 xDrive35i
2015+ F26 BMW X4 xDrive28i X4 xDrive35i
Genuine BMW
Part #: 13518604231
Price: $90.74 (USD) 
$104.48 (13% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

    • A custom anodized billet fitting for the pump output and stock fuel line connection.
    • Our custom billet aluminum anodized bracket for the pump and float assembly
    • Two cotter pins to secure your float assembly
    • A new E85 compatible Walbro 450 pump
    • Spare vent tube clip
    • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

    • A complete plug and play solution by simply adding the secondary module
    • Our custom billet aluminum fitting to run both pumps in parallel
    • A new E85 compatible Walbro 450 pump
    • Wiring harness for the secondary pump
    • Spare vent tube clip
    • A new Walbro filter
  • Recommended accessories:
    • Lock Ring Removal Tool
    • Hobb's switch 
       
  • NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.
Fuel-It!
Part #: FILPFPK4
Price: $469.90 (USD) 
Direct Ship
Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

Trade-in:

  • This option allows you to receive a rebuilt/upgraded stock bucket with a new Walbro 450 pump, filter, and fittings to swap out your stock LPFP assembly.  A $150 core deposit is included in the price that will be refunded when we receive your *stock bucket.

New Build:

  • This option includes a new LPFP bucket that is upgraded with a new Walbro 450 pump, filter, and fittings.  No core deposit is required but you are eligible for a core refund of $50 should you elect to return your *stock bucket.

All three options include the following:

  • A complete plug and play solution by simply replacing your stock bucket
  • A new E85 compatible Walbro 450 pump
  • A new Walbro filter
  • A custom fitting that is tuned to optimize the venturi and pump output
  • Spare vent tube clip
  • Flow testing prior to shipping

 To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning) 

+ International customers:  Due to different emissions requirements, the top portion of your fuel bucket (top hat) is different and doesn't have a large vent tube connection.  For this reason, we are no longer sending the top hat to international customers as this often causes confusion.  Those customers will simply re-use their current top hat when installing their Stage 2 pump.

 

Fuel-It!
Part #: FILPFPK2
Price: $724.95 (USD) 
Direct Ship