BMW Fuel System Parts for BMW X Series E84 (2013-2015)

Clear BMW chassis

Please ensure your correct model is selected

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:
Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - BMW E9X E8X
Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...
Precision Raceworks - Corporate Logo
T#:1331979
Part#: 601-0176
In Stock
$ 419.99 USD
Free Shipping
Add to Wish List
$ 419.99 USD
Free Shipping
Add to Wish List
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.
Show More Show Less
Bav Auto Fuel Injector Removal/Installation Tool - N55
Bav Auto Fuel Injector Removal/Installation Tool - N55
For E - Chassis N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580388
Part#: B8800075
In Stock
Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
Add to Wish List
Sale - Save 20%
$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
Add to Wish List
This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.
Bav Auto Fuel Injector Installer / Remover - N20/N55
Bav Auto Fuel Injector Installer / Remover - N20/N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580389
Part#: B8800076
Ships on Oct 20, 2026
Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
Add to Wish List
This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.
Bav Auto Fuel Injector Seal Installer & Remover - N54/N63
Bav Auto Fuel Injector Seal Installer & Remover - N54/N63
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580445
Part#: B8800140
In Stock
Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
Add to Wish List
Sale - Save 3%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
Add to Wish List
This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.
Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-Chassis N52/N54/N55
Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...
Precision Raceworks - Corporate Logo
T#:5216002
Part#: 601-0110
In Stock
$ 868.99 USD
Free Shipping
Add to Wish List
$ 868.99 USD
Free Shipping
Add to Wish List
If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 1000whp on 93 octane pump gas or 875whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~1000whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less
Precision Raceworks Bucketed High Performance Fuel Pump Kit - Stage 2.5 V2 (Modular) - BMW E-Chassis N52/N54/N55
Precision Raceworks Bucketed High Performance Fuel Pump Kit - Stage 2...
Precision Raceworks - Corporate Logo
T#:8169508
Part#: 601-0116
In Stock
$ 594.99 USD
Free Shipping
Add to Wish List
$ 594.99 USD
Free Shipping
Add to Wish List
The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85 and flow up to 3.9 liters per minute. The included Genuine Walbro 535 (F90000295) fuel pump is capable of flowing up to 350% more fuel than the factory fuel pump and is 100% E85 compliant. Precision Raceworks' Stage 2.5 V2 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 650whp (Rated for 550whp on 100% E85) and is ready to grow with you as your needs demand. Unlike other manufacturers, Precision Raceworks is the only company featuring a bucketed kit with a modular design. This means you can purchase their stage 3 pump module or Stage 3.5 module and upgrade the pump as your needs change. If you are looking for a 100% assembled drop-in-ready solution, this is the choice for you! **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Features & Specifications: Lock Ring Tool Included Pump flow 72psi (5bar): 1.0 GPM / 3.9 LPM Pump Weight: 3.98 lbs Horsepower Supported Pump Gas: 650 Horsepower Supported 100% E85: 550 Aftermarket EKP Required: No
Show More Show Less
Stage 1 Low Pressure Fuel Pump Complete Inline Upgrade
Stage 1 Low Pressure Fuel Pump Complete Inline Upgrade
Fuel-It! - Corporate Logo
T#:403509
Part#: BMW-S1LPFP-CK
Ships in 1 Business Day
$ 199.99 USD
Free Shipping
Add to Wish List
$ 199.99 USD
Free Shipping
Add to Wish List
This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.
Spool Performance Helix HPFP Overdrive Unit - N55
Spool Performance Helix HPFP Overdrive Unit - N55
Spool Performance - Corporate Logo
T#:9642131
Part#: SP-54HX-1-N55
Ships in 3 Business Days
$ 849.00 USD
Free Shipping
Add to Wish List
$ 849.00 USD
Free Shipping
Add to Wish List
Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The early N55 high-pressure pump is a very capable and over-engineered piece of hardware. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in early N55 fuel systems without the complexity of a secondary port injection system.
Show More Show Less
Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-Chassis N52/N54/N55
Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...
Precision Raceworks - Corporate Logo
T#:5215999
Part#: 601-0096
Ships in 8 Business Days
$ 519.99 USD
Free Shipping
Add to Wish List
$ 519.99 USD
Free Shipping
Add to Wish List
If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less
Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - BMW E9X E8X
Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - ...
Precision Raceworks - Corporate Logo
T#:1165729
Part#: 601-0017
In Stock
$ 349.99 USD
Free Shipping
Add to Wish List
$ 349.99 USD
Free Shipping
Add to Wish List
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 600whp on 93 octane pump gas or 550whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.
Show More Show Less
Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ - BMW E9X E8X
Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...
Precision Raceworks - Corporate Logo
T#:1331984
Part#: 601-0062
In Stock
$ 424.99 USD
Free Shipping
Add to Wish List
$ 424.99 USD
Free Shipping
Add to Wish List
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Black Market Parts (by Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2+ bucketless fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 575whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.
Show More Show Less
Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series
Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series ...
Fuel-It! - Corporate Logo
T#:403280
Part#: FILPFPK4
Ships in 2 Business Days
Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping
Add to Wish List
Sale - Save 3%
$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping
Add to Wish List

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

    • A custom anodized billet fitting for the pump output and stock fuel line connection.
    • Our custom billet aluminum anodized bracket for the pump and float assembly
    • Two cotter pins to secure your float assembly
    • A new E85 compatible Walbro 450 pump
    • Spare vent tube clip
    • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

    • A complete plug and play solution by simply adding the secondary module
    • Our custom billet aluminum fitting to run both pumps in parallel
    • A new E85 compatible Walbro 450 pump
    • Wiring harness for the secondary pump
    • Spare vent tube clip
    • A new Walbro filter
  • Recommended accessories:
    • Lock Ring Removal Tool
    • Hobb's switch 
       
  • NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.
Show More Show Less
Fuel-It! Low Pressure Fuel Pump Upgrade Stage 1 - N54/55 E-Series
Fuel-It! Low Pressure Fuel Pump Upgrade Stage 1 - N54/55 E-Series ...
Fuel-It! - Corporate Logo
T#:403249
Part#: FILPFPK1
Ships in 1 Business Day
Starting at $ 199.99 USD
Free Shipping
Add to Wish List
Starting at $ 199.99 USD
Free Shipping
Add to Wish List

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

  • SAE J30R10 E85 compatible fuel line
  • 14ga fuel resistant wiring harness
  • Quick connect female bullet connectors (2)
  • Vent tube replacement clip
  • Nylon cable ties (10)
  • Stainless steel lock nuts (2)
  • 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
  • Pushlock pump retention fittings (2)
  • 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

    *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

    ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less
Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0L
Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0...
Precision Raceworks - Corporate Logo
T#:1316810
Part#: 601-0015
In Stock
$ 699.99 USD
Free Shipping
Add to Wish List
$ 699.99 USD
Free Shipping
Add to Wish List
If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!
Show More Show Less
Black Market Parts Multi-Port Injection Kit - 330cc - BMW N20/N26 2.0L
Black Market Parts Multi-Port Injection Kit - 330cc - BMW N20/N26 2.0...
Precision Raceworks - Corporate Logo
T#:5229453
Part#: 601-0166
Ships in 9 Business Days
$ 689.99 USD
Free Shipping
Add to Wish List
$ 689.99 USD
Free Shipping
Add to Wish List
If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors. This kit features 330cc* injectors standard (this flow rate is based on industry injector flow test pressure of 43.5psi). Additionally, we offer a further upgrade to 750cc* injectors! These are the same ones found in our N54/N55/S55 port injection kit and will provide all the supplemental fuel even your largest HP N20 & N26 motors can handle. Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping