Genuine BMW Gas Cap - Most BMWs 2000+

T#:2788

Part#: 16117222391

In Stock

9% off MSRP $ 40.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.69 USD

Add to Wish List

Qty

9% off MSRP

$ 40.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.69 USD

Add to Wish List

This fuel cap is an original BMW product. A faulty gas cap can often be the cause a fault code and trigger a "check engine" light.

Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...

T#:1331979

Part#: 601-0176

In Stock

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37757295

Part#: 601-0240

Ships in 6 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

AAE Remanufactured High Pressure Fuel Pump - BMW N54 N55 3.0L ...

T#:42200953

Part#: 13517616170RKT

Back Ordered

$ 816.99 USD

Add to Wish List

Qty

$ 816.99 USD

Add to Wish List

This is the updated high pressure fuel pump for BMW's with the N54 or N55 turbo engine. The high-pressure fuel pump is a known weak point on the N54 and N55 engines and can cause limp mode or even leave you stranded if it fails. This is the latest and most current version of the fuel pump offered. Common symptoms of a failing pump include rough idle, engine misfires, sudden loss of power, or failure to start. If your vehicle still has an earlier revision of the pump, especially if it's modified or will be in the future, this is a worthwhile upgrade for improved reliability. Included in the retail price is a refundable $130 core charge.

Show More Show Less

Bav Auto Fuel Level Sensor & Fuel Pump Lock Ring Tool - BMW & MINI ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580400

Part#: B8800089

Ships on Sep 30, 2026

Sale - Save 10% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD

Add to Wish List

Used to remove fuel level and fuel pump lock rings properly to avoid damage.

Filler Cap - Priced Each

T#:596863

Part#: 16117470341

In Stock

$ 35.74 USD

Add to Wish List

Qty

$ 35.74 USD

Add to Wish List

Genuine BMW Sky Blue Relay - Multiple BMWs

T#:21328

Part#: 61366915327

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Commonly used in multiple BMWs, usually controlling fuel pump operation.

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks ...

T#:38161701

Part#: 101-0257

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

6-micron filtration – Removes fine particles and contaminants to protect engine components
High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
Optimized fuel flow – Maintains consistent fuel delivery for peak performance
Durable construction – Engineered for long-lasting reliability in high-demand applications
Easy replacement – Simple installation for routine maintenance
Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as needed
Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55

T#:38094311

Part#: 201-0188

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

Seamless fit – Compatible with most aftermarket top mount port injection manifolds
Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
Leak-proof design – Dual-seal quick connectors for maximum fuel safety
High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
Easy installation – Direct plug-and-play with factory and aftermarket fuel lines

Show More Show Less

Bav Auto Fuel Injector Removal/Installation Tool - N55

For E - Chassis N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580388

Part#: B8800075

In Stock

Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37892104

Part#: 601-0288

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Precision Raceworks Upgraded Fuel Lines W/ Ethanol Sensor Connection ...

T#:10714270

Part#: 201-0247

In Stock

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

NOTE: Requires a Continental Flex Fuel Sensor be utilized, will not directly replace the OE fuel line. The Precision Raceworks AN6 Fuel line upgrade is a direct replacement from the fuel filter on the driver’s side of the car to the high-pressure fuel pump. All connections are designed in-house and machined from 6061 aluminum then anodized for 100% E85 compliance. All female connectors have 2 seals (a primary and secondary seal) to guarantee no possible fuel leaks. The fuel line used by Precision Raceworks is smooth bore PTFE hose that is wrapped in a Stainless Steel braiding for protection and then a nylon braiding to protect surfaces. This type of hose is used in high-end E85 applications built all over the world. This is a better than OEM quality solution to help you achieve the needs of your high horsepower build on E85. Specifications: Fuel hose type: PTFE Smooth Bore Line Size: -6AN (1/2") Connection Style: OEM Quick Connect Connector Material: 6061 Aircraft Grade Aluminum Connects to flex fuel sensor: Yes

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161736

Part#: 201-0405

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Bav Auto Fuel Injector Installer / Remover - N20/N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580389

Part#: B8800076

Ships on Oct 20, 2026

Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD

Add to Wish List

This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel ...

T#:21933055

Part#: N54PIIMINJECT

In Stock

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

10X Entries Into Our F80 M3 Sweepstakes

T#:580445

Part#: B8800140

In Stock

Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.

Genuine BMW Fuel Feed Line - 16127172162 - E90,E92,E93

T#:44920

Part#: 16127172162

Ships in 4 Business Days

6% off MSRP $ 110.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

Qty

6% off MSRP

$ 110.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

Genuine BMW Fuel Feed Line -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N20,N52,N52N,N54,N54T,N55

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...

T#:5216002

Part#: 601-0110

In Stock

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 1000whp on 93 octane pump gas or 875whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~1000whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

High Pressure Pipe

T#:42219

Part#: 13537576771

Ships in 4 Business Days

Sale - Save 8% $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.05 USD

Add to Wish List

Qty

Sale - Save 8%

$ 83.99

This product was last offered at the strikethrough price on
08-26-2026

$ 77.05 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

Precision Raceworks Universal Adjustable Fuel Pressure Regulator W/ 1...

T#:38195449

Part#: 501-0043

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.

Genuine BMW N20 2.0L High-pressure Rail - 13537585411

T#:42237

Part#: 13537585411

Ships in 4 Business Days

6% off MSRP $ 442.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

Qty

6% off MSRP

$ 442.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

Genuine BMW N20 2.0L High-pressure Rail

Genuine BMW N20 2.0L High-pressure Rail is an essential component designed to enhance the fuel delivery system of your BMW. This high-pressure rail ensures optimal fuel pressure for the N20 2.0L engine, leading to improved performance and efficiency. Manufactured with precision and using premium materials, it guarantees durability and reliable operation, aligning with BMW's high standards.

Ensures optimal fuel pressure for enhanced engine performance
Precision-engineered to fit perfectly with BMW N20 2.0L engines
High-quality materials for long-lasting durability
Improves fuel efficiency and overall vehicle performance
Easy installation for seamless replacement

Upgrade your BMW’s fuel system with the Genuine BMW N20 2.0L High-pressure Rail and experience superior performance and efficiency.

Genuine BMW High-Pressure Rail -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Genuine BMW Fuel Tank Breather Valve with Breather Line - E82 E88 E92...

T#:43824

Part#: 13907636153

In Stock

2% off MSRP $ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 140.99 USD

Add to Wish List

Qty

2% off MSRP

$ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 140.99 USD

Add to Wish List

Genuine BMW Fuel Tank Ventilation Valve With Pipe -
This item fits the following BMW Chassis:
E82,E90,E92,E93,F22,F30,F32,F33,F36

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Fuel Hose - 1 Meter

T#:41534

Part#: 13311272750

Ships in 2 Business Days

3% off MSRP $ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

3% off MSRP

$ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 6X11mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E30,E34,E36,E38,E46

Genuine BMW Fuel Injector Installation Kit - N55 3.0L

T#:376798

Part#: 13537577649KT

In Stock

$ 174.99 USD

Add to Wish List

Qty

$ 174.99 USD

Add to Wish List

Genuine BMW High Pressure Fuel Pressure Sensor - N55 3.0L, B38 1.5L, ...

T#:42256

Part#: 13537620946

Ships in 4 Business Days

9% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

9% off MSRP

$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Genuine BMW Sensor, High-Pressure

Genuine BMW High Pressure Fuel Pipe - N55 3.0L

T#:42221

Part#: 13537576776

Ships in 4 Business Days

4% off MSRP $ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

4% off MSRP

$ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

Walbro Ultra High-Performance Fuel Pump - (Universal E85 Ethanol) - T...

T#:23020149

Part#: F90000295

In Stock at Vendor

$ 203.99 USD

Add to Wish List

Qty

$ 203.99 USD

Add to Wish List

New DCSS 39/50 High-Performance Pump – F90000295

Highest flow in-tank brushed fuel pump offering from TI Automotive / Walbro
No Internal check valve - ideal for racing applications to build oil pressure prior to start-up
Featuring award-winning DCSS technology
E85 compatible
High-pressure relief setting - supports supercharger and turbo applications
Capable of supporting 900+HP at 60PSI naturally aspirated applications
Complete Pump and kit combination – TCD495

Fuel: GAS & E85

Horsepower: 900+ at 60PSI, naturally aspirated applications

Over All Pump Length: 131mm

Main Housing Diameter: 39mm

Lower Housing Diameter: 50mm

Fuel Inlet Diameter: 11mm OD

Fuel Outlet Diameter: 11mm OD

Flow Rate: 535LPH at 40psi

Test Voltage: 13.5 Volts

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 3 - ...

T#:5215998

Part#: 601-0018

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, of supporting up to 1050whp on 93 octane pump gas or 875whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed! With an open expansion slot ready to use, just a simple Stage 3.5 or Stage 4 module is all you need to purchase to increase your fueling capabilities. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you. Stage 2 Specifications: Horsepower Supported Pump Gas: ~1050whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No *To reach the advertised ability of these fuel pumps use of the Precision Raceworks in-tank filter regulator assembly is required.

Show More Show Less

Genuine BMW Fuel Filter w/ Regulator - E9x 325i, 328i, 330i, 335i - E...

T#:15032

Part#: 16117163295

In Stock

11% off MSRP $ 268.32

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.99 USD

Add to Wish List

Qty

11% off MSRP

$ 268.32

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.99 USD

Add to Wish List

We recommend preventative replacement of the fuel filter at 80-100,000 mile intervals. BMW called them "lifetime" but there's no question that any filter is going to get saturated with debris and dirt and its performance will suffer. The dirty filter can cause E90/E92 running issues like stalling, poor performance, rough running, chugging. We have replaced these filters in cars with 130,000+ miles and found the original filter was long overdue for replacement. These cars had the above driveability problems but had no fault codes or DTCs (which led to other shops making poor service recommendations). So we recommend having this done at the 80-100,000 mile mark as a scheduled maintenance item. There's no harm or downside to replacing it before it's completely clogged and your engine starts to suffer.

The fuel filter is located on the driver's side and includes two new large o-rings for the lock rings. The crossover lines to the fuel pump on the passenger side are included as well. We recommend new steel lock rings for the filter and the pump, especially on cars located in the Rust Belt or in salty climates. On really high mileage cars it would be a good idea to also replace the fuel pump as preventative maintenance since the job is essentially the same. The E9X fuel filter replacement is not complex but access can be difficult and you're dealing with potentially fragile plastic so amateurs may want to leave this to a professional technician.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Not for N51 SULEV engines in 128i/328i/328xi. Check with your BMW dealer on SULEV parts that may be covered under an extended warranty.

This item fits the following BMWs:
2008+ E82 BMW 128i
2010-2011 E82 BMW 135i 135is
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive - Sedan
2006-2013 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2011 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2007-2011 E93 BMW 335i Convertible

Show More Show Less

Genuine BMW High Pressure Fuel Injection Pump - N54 N55 135i, 335i, 5...

T#:360279

Part#: 13517616170

In Stock

$ 1,650.57 USD

Add to Wish List

Qty

$ 1,650.57 USD

Add to Wish List

This is the updated high-pressure fuel pump for BMW's with the N54 or N55 turbo engine. When doing any sort of repair or maintenance, there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence. Includes a $413.00 refundable core charge

Show More Show Less

Genuine BMW High-Pressure Fuel Pump - N20 N26 2.0L

T#:194709

Part#: 13518604229

Ships in 4 Business Days

4% off MSRP $ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,234.99 USD

Add to Wish List

Qty

4% off MSRP

$ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,234.99 USD

Add to Wish List

This is the high-pressure fuel pump for BMW's with the N20 turbo engine. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW High-Pressure Pump -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

High Pressure Pipe

T#:42220

Part#: 13537576772

In Stock

Sale - Save 8% $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.05 USD

Add to Wish List

Qty

Sale - Save 8%

$ 83.99

This product was last offered at the strikethrough price on
08-26-2026

$ 77.05 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 5 Bar

T#:38094305

Part#: 601-0260

Back Ordered

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

AN6 Male Flare/ORB To 5/16" (7.89mm) Female Quick Connect

T#:38094309

Part#: 201-0274

Ships in 6 Business Days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?

Show More Show Less

Replacement Fuel Filter Element - Single Open 10 Micron | Precision R...

T#:38161702

Part#: 101-0256

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
Versatile use – Perfect for daily driving, street, and high-performance applications
Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as necessary
Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...

T#:5215999

Part#: 601-0096

Ships in 9 Business Days

$ 519.99 USD

Add to Wish List

Qty

$ 519.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Black Market Parts Fuel Pump Expansion Modules - Stage 3 - BMW E9X E8...

T#:38195447

Part#: 601-0019

In Stock

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Black Magic Parts' (by Precision Raceworks) bucketless low pressure fuel pumps are designed for customers looking to run all blends of E85. The pump ships assembled with an OEM connector to plug into the factory fuel pump top hat making it quick and easy to install. Our Stage 3 bucketed module will add a 450 pump to your existing PR Stage 2 or 2.5 kit. This will include all necessary hardware and wiring to upgrade your pump to a stage 3 and support up to 1000whp* (Rated for 875whp on 100% E85)

Show More Show Less

PNP Ethanol Sensor Harness For Motiv Re|Flex Plus

T#:38161679

Part#: 201-0410

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.

Genuine BMW Fuel hose

T#:42244

Part#: 13537594825

Ships in 4 Business Days

5% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.00 USD

Add to Wish List

Qty

5% off MSRP

$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.00 USD

Add to Wish List

Genuine BMW Fuel Hose
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F25 X3

Fits BMW Engines including:
N54,N54T,N55

Genuine BMW Fuel Tank Ventilation Valve - 13907636141

T#:43821

Part#: 13907636141

Ships in 6 Business Days

4% off MSRP $ 150.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD

Add to Wish List

Qty

4% off MSRP

$ 150.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD

Add to Wish List

Genuine BMW Fuel Tank Ventilation Valve With Pipe -
This item fits the following BMW Chassis:
E89 Z4,F22,F30,F31,F32,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 950cc - BMW N54/N55 3.0...

T#:38262759

Part#: 601-0188

In Stock

$ 959.99 USD

Add to Wish List

Qty

$ 959.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 950cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi). This means Precision's BMP Port Injection Kit is capable of supporting builds from 500whp up to 1,000+whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Genuine BMW Fuel Injector - N55 N20

For vehicles with production date up to 07/2012

T#:42780

Part#: 13647597870

In Stock

Sale - Save 8% $ 372.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 341.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 8%

$ 372.99

This product was last offered at the strikethrough price on
08-03-2026

$ 341.99 USD

Limited Qty Sale

Add to Wish List

Replace your clogged or malfunctioning fuel injector with this Genuine BMW injector to restore proper engine idling and running conditions.

Genuine BMW Injector -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F36

Fits BMW Engines including:
N20,N26,N55

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - ...

T#:1165729

Part#: 601-0017

In Stock

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 600whp on 93 octane pump gas or 550whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Genuine BMW Fuel Injection Fuel Feed Pipe - F10 F30 E84 Z4 F32 F31 F2...

T#:42238

Part#: 13537585426

In Stock

4% off MSRP $ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

4% off MSRP

$ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 6 Bar

T#:38094308

Part#: 601-0261

Ships in 10 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...

T#:1331984

Part#: 601-0062

In Stock

$ 424.99 USD

Add to Wish List

Qty

$ 424.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Black Market Parts (by Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2+ bucketless fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 575whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Genuine BMW Fuel Pressure Sensor - Multiple BMWs

T#:42257

Part#: 13537622231

Ships in 4 Business Days

8% off MSRP $ 146.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 134.99 USD

Add to Wish List

Qty

8% off MSRP

$ 146.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 134.99 USD

Add to Wish List

Located on the fuel supply line, this sensor monitors the fuel pressure coming from the fuel pump to regulate how much fuel your engine is getting. It monitors for low fuel pressure to let you know if there are issues with your low-pressure fuel pump.

Show More Show Less

MTX-D: Ethanol Content % And Fuel Temperature Gauge

T#:22558994

Part#: INN3904

In Stock at Vendor

14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Qty

14% off MSRP

$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

Ethanol Content %: 0-100%
Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

Ethanol Content
Error reporting for ethanol content sensor (Digital Display)
Fuel Temperature
Customizable exterior LED display
Programmable exterior LED color options
Selectable unit of measure in °F or °C
Programmable fuel temperature warning (outer LED)
2-Configurable analog outputs
Ethanol Content: 0v = 0%, 5v = 100%
Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less

Walbro High Flow Fuel Pump - 255 LPH

T#:371990

Part#: PMPWINLINE

In Stock

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

The Walbro 255 is often a choice for N54 and N55 owners when the factory high flow fuel pump is not satisfactory.

Note that this fuel pump will require some additional wiring to work in your particular vehicle.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts for BMW X Series E84 (2013-2015)

Sub-Categories

Fuel Filter Replacement Guidelines:

Genuine BMW N20 2.0L High-pressure Rail

New DCSS 39/50 High-Performance Pump – F90000295

Fuel Filter Replacement Guidelines:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results