BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use
Shark Injector - Corporate Logo
T#:387575
Part#: N745Z430
Ships on Aug 11, 2026
Sale - Save 10% $ 349.00

This product was last offered at the strikethrough price on
05-03-2026

$ 314.10 USD
Free Shipping
Sale - Save 10%
$ 349.00

This product was last offered at the strikethrough price on
05-03-2026

$ 314.10 USD
Free Shipping

Revitalize your BMW's performance effortlessly with the Shark Injector, the easiest solution to add power and torque. Dyno-tuned by BMW legend Jim Conforti, this software optimizes high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is raised, and fuel and spark maps are fine-tuned for improved performance without compromising driveability. A true plug-and-play solution, each unit is shipped with detailed instructions, ensuring a swift installation in just an hour.

  • Dyno-tuned by BMW legend Jim Conforti for optimal performance
  • Designed for high-octane (91+) pump gas
  • Boosts mid-range torque and high-RPM horsepower
  • Fine-tuned fuel and spark maps for enhanced power
  • Maintains driveability and improves responsiveness
  • Easy plug-and-play installation with detailed instructions
  • Rev limit raised to 7,000 RPM for an exhilarating driving experience
  • Compatible with NORTH AMERICAN SPEC BMWs
  • +4 HP at 6,100 RPM, +7 torque @ 3,400 RPM

Unleash the full potential of your BMW's M54 engine with the Shark Injector, designed for a superior driving experience.

Show More Show Less
Shark Injector - Corporate Logo
T#:387566
Part#: N745Z425
Ships on Aug 11, 2026
Sale - Save 10% $ 349.00

This product was last offered at the strikethrough price on
05-03-2026

$ 314.10 USD
Free Shipping
Sale - Save 10%
$ 349.00

This product was last offered at the strikethrough price on
05-03-2026

$ 314.10 USD
Free Shipping

Unlock the full potential of your BMW effortlessly with the Shark Injector, offering the easiest way to enhance power and torque. Tuned by BMW legend Jim Conforti, this software optimizes high-octane pump gas for mid-range torque and high-RPM horsepower. The Shark Injector is designed for seamless installation, providing a true plug-and-play performance solution that takes only an hour. Enjoy improved performance without compromising driveability.

  • Easy Installation: Simply connect the Shark Injector using a battery charger, push a button, and witness a quick, hassle-free installation process.
  • Performance Boost: Gain an impressive 7 HP at 5,800 RPM, 7 lb/ft of torque at 4,700 RPM, and experience a raised rev limit to 7,000 RPM.
  • Enhanced Driving Experience: Jim Conforti's tuning improves engine response, removes the speed limiter, and elevates the driving experience under various throttle conditions.
  • North American Compatibility: Exclusively designed for North American SPEC BMWs; not suitable for Euro-SPEC BMWs.
Show More Show Less

Shark Injector - Corporate Logo
T#:386540
Part#: SHARK-UPGRADE
In Stock
Sale - Save 10% $ 150.00

This product was last offered at the strikethrough price on
05-03-2026

$ 135.00 USD
Free Shipping
Sale - Save 10%
$ 150.00

This product was last offered at the strikethrough price on
05-03-2026

$ 135.00 USD
Free Shipping

You may be able to upgrade the Shark Injector file to another version to better meet your tuning needs. Depending on the model we may have better tunes for things such as intakes, larger air sensors, camshafts, headers, and others. For a small fee the current Shark Injector tune can be removed and a new file added instead (the original Shark file you were using would no longer be available). To do this, we need the car restored to stock settings with the current Shark Injector and then returned to us (updating via USB is not yet available). Sharks that were not Restored to stock cannot be upgraded and the unit will be returned to you (at your expense). We also perform other work on the Shark Injector while it is here, including diagnostic tests and re-packaging with the most current instructions. The Shark that you get back is virtually new and ready to be reinstalled!

To get started, review the catalog of current Shark Injector files for one that better matches your tuning spec.
1. Enter the new tuning file in the form below. Include any other relevant information.
2. Click the Update Price or Add To Cart button.
3. Complete the online transaction with your address and payment information.
4. A Turner Motorsport sales rep will contact you after your order has been submitted. Do not send in your Shark Injector until someone has contacted you with a reference number and return shipping address.

Turn-around time for upgrades is typically the same day we receive it. UPS Ground is the normal return shipping method unless you specify faster shipping on your order. 

Helpful Links:

  • Shark Injector File List - listing of all Shark Injector files by vehicle model. Select a file from this list to upgrade to.
  • Shipping Instructions - specific instructions for packaging and shipping. Also includes a contact form to include when you send back your Shark.
  • Emissions Waiver - some tunes require this emissions/smog waiver before we can program the new file to your Shark. These are noted in the catalog listing in the links above. Print and include this Waiver when you send in your Shark.

Shark Injector installation instructions

Show More Show Less

QuickJack - Corporate Logo
T#:3643614
Part#: 6000ELX
Ships in 4 Business Days
Starting at $ 2,694.00 USD
Free Shipping
Starting at $ 2,694.00 USD
Free Shipping
The frames of the 6000ELX are super-long, surpassing even the extended-length TLX series. This elongated frame design is particularly suited for vehicles with extremely long wheelbases, making it compatible with virtually all contemporary electric vehicles (EVs) as well as other models boasting extended wheelbases, including high-end luxury vehicles with lift points extending to the far edges of the vehicle frame.
Show More Show Less
Shark Injector - Corporate Logo
T#:339102
Part#: TMS1875
Ships on Aug 11, 2026
Sale - Save 10% $ 349.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 314.10 USD
Free Shipping
Sale - Save 10%
$ 349.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 314.10 USD
Free Shipping
  • Unlock torque and horsepower
  • Smoother engine with less hesitation
  • Improved throttle response
  • Rev limit increased to 7000
  • Top speed limiter removed
  • Installs in minutes!
  • Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

    The Shark Injector plugs into the diagnostic port inside the Z4 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

    Z4 2.5 (M54 engine) Performance Software Peak Gains

    HP Gain Up To + 7 @ 5800 RPM

    Torque Gain Up To + 7 @ 4700 RPM

    New Rev Limit7000 RPM


    M54 engine dyno chart

    Z4 3.0i (M54 engine) Performance Software Peak Gains

    HP Gain+ 4 @ 6100 RPM

    Torque Gain+ 7 @ 3400 RPM

    New Rev Limit7000 RPM


    M54 engine dyno chart
    Shark Injector Installation Instructions

    (click to expand)

    Shark Injector installation instructions
    A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
    The minimum octane fuel for this software is 91.Shark Injector FAQ

    (click to expand)

    Shark Injector FAQ
    This item fits the following BMWs:
    2003-2005 E85 BMW Z4 2.5i Z4 3.0i

  • Show More Show Less

    Ammex - Corporate Logo
    T#:580896
    Part#: GPNB46100
    In Stock
    Sale - Save 13% $ 22.99

    This product was last offered at the strikethrough price on
    03-01-2026

    $ 19.95 USD
    Free Shipping on orders $49 and up
    Sale - Save 13%
    $ 22.99

    This product was last offered at the strikethrough price on
    03-01-2026

    $ 19.95 USD
    Free Shipping on orders $49 and up
    Keeps hands free of dirt and oil, large
    Ammex - Corporate Logo
    T#:580894
    Part#: GPNB42100
    In Stock
    Sale - Save 26% $ 22.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 17.06 USD
    Free Shipping on orders $49 and up
    Sale - Save 26%
    $ 22.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 17.06 USD
    Free Shipping on orders $49 and up
    GlovePlus Black Nitrile Gloves are the pinnacle of premium, industrial-grade hand protection. Designed to endure, each pair is 30% thicker than standard nitrile gloves, guaranteeing exceptional durability throughout your tasks. Experience unbeatable longevity while you work, thanks to their robust construction. These gloves provide outstanding defense against common chemicals such as carburetor cleaner, as well as specialized chemicals like iodine and butane that you may encounter on the job. They even stand up to brake fluid and maintain their integrity even after being immersed in gasoline. Your work environment can be unpredictable, whether it's wet or dry. For both scenarios, you require a secure grip. That's why GlovePlus Black Nitrile gloves are meticulously micro-roughened on the palm and textured on the fingertips, ensuring you maintain control and confidence in your tasks. Each box contains 100 gloves. Available in a range of sizes including Small, Medium, Large, Extra-Large, and XX-Large (sold separately).
    Show More Show Less

    SACHS Performance - Corporate Logo
    T#:393829
    Part#: 881864999517
    In Stock
    Sale - Save 63% $ 499.00

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 182.97 USD
    Free Shipping
    Sale - Save 63%
    $ 499.00

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 182.97 USD
    Free Shipping

    Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for aggressive track applications such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

    Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

    Show More Show Less

    Beru - Corporate Logo
    T#:338884
    Part#: FGR-6DDU
    Back Ordered
    Sale - Save 17% $ 23.99

    This product was last offered at the strikethrough price on
    05-14-2026

    Starting at $ 20.00 USD
    Free Shipping on orders $49 and up
    Sale - Save 17%
    $ 23.99

    This product was last offered at the strikethrough price on
    05-14-2026

    Starting at $ 20.00 USD
    Free Shipping on orders $49 and up
    RACING SPARK PLUG FOR M50/M52/M54 ENGINES
    These spark plugs are recommended by BMW Motorsport for use in their DTC racing engines. We find a slight horsepower increase and greatly increased durability over the OEM road car spark plugs in competition use. We attribute the improvements to the fact that these spark plugs are designed for the high temperatures and cylinder pressures encountered in a racing engine. These spark plugs are a direct replacement and come pre-gapped just like the factory road car plugs.
    Please note: these plugs are not for the S54 engine in the E46 M3, MZ3, or Z4 M
    Show More Show Less
    Genuine BMW Motorsport - Corporate Logo
    T#:338369
    Part#: 33327749778
    Ships on Aug 24, 2026
    Starting at $ 198.94 USD
    Free Shipping
    Starting at $ 198.94 USD
    Free Shipping
    Designed and built in-house at BMW Motorsport, these are stock rear camber arms from the E36 M3 that have been strengthened by welding a reinforment in between the wishbones. Stiffer than the stock units and still adjustable for camber. This arm is legal in many racing classes where an aftermarket arm is not permitted. Sold individually, two required per car.

    For maximum adjustment solid aluminum camber arms, you may also want to check out our TMS E36/E46 Adjustable Rear Camber Arms .

    This arm does not include a bushing, but you may choose add a bushing using the drop down below. For an additional charge, you can get the bushing pre-pressed into the arm, so it is ready to install on the car (no added shop time or hydraulic press required).

    Sold Individually.
    Show More Show Less