12x1.5 Conical Seat Wheel Nuts with 17mm Hex Head

ECS Tuning introduces 12x1.5 conical seat wheel nuts featuring a 17mm hex head, tailored for vehicles that have transitioned to a stud-style mounting system. These open-ended wheel nuts are the perfect solution for accommodating longer studs without any fitment concerns.

Product Details:

• Thread Size: 12x1.5
• Hex Head Size: 17mm
• Designed for vehicles with stud-style mounting
• Open-ended design to accommodate longer studs

ECS Tuning proudly presents extended wheel bolts, available individually or matched with our spacers to ensure precise fitment. These bolts adhere to the stringent ISO 898 class 10.9 standards, guaranteeing exceptional mechanical and physical properties. Lab-tested to confirm class 10.9 compliance, they meet rigorous requirements for material properties, hardening, and proof load strength.

Bolt Specifications:

• Diameter: 12mm
• Thread Pitch: 1.5mm
• Length: 32mm

Note: For wheel spacer installation, add the spacer size to the OE wheel bolt's length for accurate fitment (e.g., 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Require a 42mm Length Bolt)

• 55MM, 75MM, 90MM LENGTHS
• Black phosphorous corrosion resistant coating
• "OEM" appearance
• Full-length threads for more nut engagement in tight spaces
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

These wheel studs are the same as our hugely popular Bullet Nose studs but with threads along the full length of the stud. This gives you more threaded area for tightening wheel nuts or allows the use of a closed-end wheel nut. These also have a more OEM appearance. Although these are a lower cost version of our Bullet Nose studs, they are every bit as strong, durable, and safe. The Bullet Nose is an upgrade because it's easier to install and almost impossible to cross-thread a nut.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

Sold per stud.

ECS Tuning Extended Wheel Bolts for Precise Fitment

Enhance your vehicle's wheel fitment precision with ECS Tuning's extended wheel bolts, designed individually or paired with spacers to ensure accurate compatibility. These bolts are engineered to meet the rigorous ISO 898 class 10.9 standards, ensuring exceptional mechanical and physical properties, including stringent material, hardening, tempering, and proof load strength criteria. Our fasteners undergo lab testing to guarantee compliance with class 10.9 requirements.

Bolt Specifications:

• Diameter: 12mm
• Thread Pitch: 1.5mm
• Length: 45mm

*For proper fitment when using wheel spacers, add the spacer size to the length of the OE wheel bolt (e.g., 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Requires a 42mm Length Bolt)

Upgrade your BMW's wheels with the BMW Conical Seat Wheel Bolt - 12x1.5x45mm. These high-quality wheel bolts are specifically designed to ensure a secure fit and optimal performance for your BMW. Engineered with precision and durability in mind, these wheel bolts offer peace of mind and reliability on the road. Experience improved handling and safety with this essential upgrade for your BMW.

• Secure fit for BMW wheels
• Engineered for optimal performance
• Precision design for reliability
• Enhances handling and safety

The E-Z Chamfer deburring tool, constructed from High Speed Steel (HSS), is designed to eliminate burrs and ridges from threaded rods, bolts, pipes, and bar stock. Its size range of 0.7” – 1.5” (18-38mm) allows efficient removal of threads and burrs, creating a smooth chamfer for effortless nut and die insertion. Compatible with mild, hard, very hard, stainless, and super hard steels, it delivers optimal results when used with slow drill speeds and moderate pressure on most materials. To extend the tool's lifespan, it's advisable to operate at speeds below 800RPM and refrain from using impact drivers. Typically, only 1-3 threads need chamfering for a clean start.

Additionally, E-Z Chamfer sizes between 18-24mm require a speed of 600RPM, those ranging from 23-29mm perform optimally at 400RPM, and sizes from 30-38mm are best suited for a speed of 300RPM.

Conical Seat Wheel Bolt - 12x1.5x30mm

Elevate your vehicle's performance and style with the Conical Seat Wheel Bolt - 12x1.5x30mm. Engineered for precision and durability, this wheel bolt ensures a secure fit for your wheels. Its conical seat design enhances wheel alignment and stability, providing optimal driving experience. Install these bolts effortlessly and enjoy a smoother, safer ride.

• Precision-engineered for optimal performance
• Durable construction for long-lasting reliability
• Conical seat design enhances wheel alignment and stability
• Easy installation process for convenience