BMW Engine Parts for BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

E46 M3, Z4M ECS Tuning Aluminum Water Pump Pulley
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:367060
Part#: 002778ECS01
Ships on Dec 18, 2026
Sale - Save 10% $ 100.99

This product was last offered at the strikethrough price on
06-13-2026

$ 90.89 USD
Free Shipping
Sale - Save 10%
$ 100.99

This product was last offered at the strikethrough price on
06-13-2026

$ 90.89 USD
Free Shipping
Most of the pulleys on your BMW engine are plastic, which become brittle and frail over time and from engine bay heat. A failed pulley could leave you stranded which is why it is vital to inspect the pulleys during routine maintenance. This is an aluminum version of the stock water pump pulley used on the S54 engine in the E46 M3, MZ3, and Z4M. It's the same size and uses the same hardware and the original belt as the stock plastic pulley. But the aluminum will last much longer.
Show More Show Less
Genuine BMW - Corporate Logo
T#:13104
Part#: 12617607910
In Stock
14% off MSRP $ 298.81

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 257.99 USD
Free Shipping
14% off MSRP
$ 298.81

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 257.99 USD
Free Shipping
This is the oil level sensor / sender for BMW E9X E53 E65 E70 E71 E82 E83 When this part fails it will illuminate a check light on the dash which indicates it needs to be replaced. Includes o-ring.
Race German - Corporate Logo
T#:6843919
Part#: RGDVNSSRK
In Stock
$ 101.99 USD
Free Shipping
$ 101.99 USD
Free Shipping
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 2 Large PTFE Teflon Ring Seal 2 Small PTFE Teflon Ring Seal 2 Large FKM (Viton) O Ring Seal 2 Small FKM (Viton) O Ring Seal 2 Small FKM (Viton) O Rings for Blind Plugs 2 Copper Oil Pipe Washers 2 Anti Rattle Bushing Set (2 Bushing + 4 Bearings)
Show More Show Less

Genuine BMW - Corporate Logo
T#:32279
Part#: 11157559528
Ships in 1 day
5% off MSRP $ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping
5% off MSRP
$ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping
This valve cover vent hose helps to vent the crankcase fumes on BMW's with the N51 / N52 6 cylinder engines. If replacing the the valve cover we recommend purchasing this item as well as it often will break while removing it from the valve cover.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ E89 BMW Z4 sDrive30i
Show More Show Less

Genuine BMW - Corporate Logo
T#:12480
Part#: 12147539165
In Stock
9% off MSRP $ 228.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 208.24 USD
Free Shipping
9% off MSRP
$ 228.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 208.24 USD
Free Shipping

Located on the intake side of the cylinder head, this sensor relays the position of the camshaft to the computer in order to determine proper ignition timing. When this sensor fails the engine will generally log a fault code and may place the vehicle into "limp" mode. When this happens it is advised to stop driving the vehicle and address the issue immediately as premature wear or long term damage to the engine is possible.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

OE BMW reference number: 12147539165
 

We also carry a this sensor with the required o ring Here

This part fits the following BMWs:
1998 - 2004 E39 Touring 525i 528i 
1996 - 2004 E39 Sedan 525i 528i 530i  
1999 - 2006 E46  323i 323ci 325i 325ci 325xi 328i 328ci 328xi 330i 330ci 330xi 

 

 

Show More Show Less
034Motorsport Density Line Solid Rubber Motor Mount Set - E8X/E9X ...
2X Entries Into Our F80 M3 Sweepstakes
[Z4] - For Roadster Models Only
034Motorsport - Corporate Logo
T#:388772
Part#: 034-509-005X
In Stock
$ 264.00 USD
Free Shipping
$ 264.00 USD
Free Shipping

Collapsing and worn engine mounts can mean big trouble for N52/N54/N55 cars. The stock mounts are filled with fluid that can leak or evaporate over time. That leaves the mount unstable and too flexible to properly support the engine. The side effects of a worn engine mount are: shaking and vibrating engine, driveline twist from engine torque that can break or snap bushings, and broken motor mount arms and bolts. If you're tired of replacing engine mounts you'll be very pleased wtih these solid rubber versions.

Not only are these more reliable than stock fluid-filled mounts, they are slightly stiffer than new stock mounts thanks to a solid rubber construction (no voids in the rubber) but designed for street use so they remain quiet and comfortable. The solid rubber has less deflection than a stock mount, so no wasted enginemotion. Less wasted motion gives you more torque to the wheels (it's not spent twisting the engine) and better engine response.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Bav Auto Variable Engine Timing Solenoid Switch - BMW E39 E46 E53 E83...
10X Entries Into Our F80 M3 Sweepstakes
Requires use of open-ended wrench for installation - does not fit BMW specific socket tool
Bavarian Autosport - Corporate Logo
T#:599824
Part#: 11361432532
In Stock
Sale - Save 20% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.19 USD
Free Shipping
Sale - Save 20%
$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.19 USD
Free Shipping
This solenoid works with the VANOS engine timing system to improve horsepower and torque throughout the RPM range. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
Bremmen Parts - Corporate Logo
T#:640488
Part#: 24117571217
In Stock
Sale - Save 13% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
Sale - Save 13%
$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
GA6HP19Z Automatic Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:582210
Part#: S54WVALVESHIMKT
In Stock
Sale - Save 3% $ 227.31

This product was last offered at the strikethrough price on
08-24-2026

$ 221.45 USD
Free Shipping
Sale - Save 3%
$ 227.31

This product was last offered at the strikethrough price on
08-24-2026

$ 221.45 USD
Free Shipping

Bosch - Corporate Logo
T#:384364
Part#: 12412354693
In Stock
$ 269.99 USD
Free Shipping
$ 269.99 USD
Free Shipping

If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. OEM replacement for BMW part # 12412354693, 12412344242, 12412167996.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

For BMW's with the M54 engine with a production date from 09/2002.

Show More Show Less
Glyco - Corporate Logo
T#:375823
Part#: 11211706847
Ships in 2 Business Days
$ 136.06

This product was last offered at the strikethrough price on
07-15-2026

$ 125.04 USD
Free Shipping
$ 125.04 USD
Free Shipping
Standard bore
Genuine BMW - Corporate Logo
T#:348491
Part#: 12138616153
In Stock
14% off MSRP $ 100.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.14 USD
Free Shipping
14% off MSRP
$ 100.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.14 USD
Free Shipping
Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors).
Show More Show Less


ACL - Corporate Logo
T#:584470
Part#: 7M1532H-STD
In Stock
$ 282.99 USD
Free Shipping
$ 282.99 USD
Free Shipping

Introducing the ACL Race Series High-Performance Main Bearing Set, meticulously crafted for BMW enthusiasts running M20, M50, M52, M54, S50, S52, and S54 engines. Take your BMW’s engine durability and performance to the next level with these race-proven main bearings, designed to handle the demands of aggressive driving and high-RPM scenarios.

Built with ACL’s Duraglide tri-metal technology, this main bearing set ensures exceptional oil flow and resistance to wear, even in extreme conditions. Engineered for performance, this upgrade is a direct replacement for stock BMW main bearings, providing enhanced strength and longevity without compromising factory tolerances.

Key Features:

Race-proven design: Ideal for performance builds, this complete set delivers superior oiling and heat resistance, making it perfect for high-RPM use. Precision fitment: Engineered specifically for BMW’s M and S series engines, offering a reliable solution for common crankshaft bearing wear issues. Duraglide technology: Featuring tri-metal construction, including a copper-lead base and high-strength overlay, for improved oil retention and reduced friction. High-load capacity: Designed to withstand the rigors of spirited driving and competition, preventing distortion and wear during peak performance. Optimized for high performance: Eliminates tin flash plating, allowing for better bearing-to-housing contact and improved durability under extreme pressure. Whether you're rebuilding your BMW for the track or simply want to ensure reliable performance under demanding conditions, the ACL Race Series Main Bearing Set offers the perfect upgrade solution. Boost your engine’s reliability and extend its lifespan with this high-performance bearing set.

Show More Show Less
ATI Performance Products - Corporate Logo
T#:639878
Part#: VAC-HPCDK-S54-ST
Ships in 10 Business Days
$ 1,049.99 USD
Free Shipping
$ 1,049.99 USD
Free Shipping
If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Made in the USA.
Show More Show Less
Genuine BMW - Corporate Logo
T#:34073
Part#: 11317585020
In Stock
12% off MSRP $ 101.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.12 USD
Free Shipping
12% off MSRP
$ 101.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.12 USD
Free Shipping


Genuine BMW Chain Tensioner And Guide Rail -
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N55,S55

Show More Show Less

Elring - Corporate Logo
T#:375058
Part#: 11127831920
In Stock
$ 419.99

This product was last offered at the strikethrough price on
07-19-2026

$ 349.99 USD
Free Shipping
$ 349.99 USD
Free Shipping

Includes the head gasket.

Sometimes you have to take the cylinder head off of your vehicle to diagnose problems, have it rebuilt, or replace a faulty head gasket. It tends to be a fairly labor intensive job, so anytime you can make it easier is definitely helpful.

When it comes time for reassembly, one of the biggest problems is finding quality gaskets and seals. Turner has your solution with this cylinder head gasket kit. With so many gaskets that are one use only to replace, getting them all done at the same time can be made harder by not having everything you need. With the proper, high quality gaskets, your reassembly will go much easier with no need for trip after trip to the local auto parts stores. Intake, exhaust, downpipe, valve cover, and in some applications valve seals will all help to get your engine into top condition.

When it's time to put everything back together, there are some things that should not be overlooked. Most cylinder head fasteners found on European automobiles are a one time use or stretch bolt. To be sure that everything is tightened down properly, it is important to replace them to get the proper torque reading and ensure the longevity of your repair.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Show More Show Less

Achilles Motorsports - Corporate Logo
T#:1150771
Part#: 11-AM-VEK-M54
In Stock
$ 144.99 USD
Free Shipping
$ 144.99 USD
Free Shipping
Achilles Motorsports' Vanos Elimination kit includes the parts necessary to lock or eliminate your Dual Vanos system and give the engine builder the ability to take full advantage of the fine-tuning/degreeing associated with race specification camshafts. This helps ensure you get the maximum power, reliability, and horsepower from your engine. This kit is for Dual Vanos M54 & M52TU Engines
Show More Show Less
Mishimoto - Corporate Logo
T#:380389
Part#: MMOCF-BMW
In Stock
$ 88.99 USD
Free Shipping
$ 88.99 USD
Free Shipping
Install a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Features: Allows for use of -10AN fittings for custom oil cooler setup 100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate Includes durable stock BMW O-rings for leak-free installation Provides additional engine bay space for applications with an oil accumulator or supercharger setup Included as part of the Mishimoto BMW E46 M3 Oil Cooler Kit Mishimoto Lifetime Warranty Included: (1) Stainless Steel Fitting Clamp (2) -10AN Fittings (2) BMW Oil O-rings (1) M8 x 1.25 x 25mm Button-Head Bolt Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov. ​
Show More Show Less

Genuine BMW - Corporate Logo
T#:348065
Part#: 11120030496KT2
In Stock
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. BMW straight six engines are notorious for leaky valve cover gaskets. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

This valve cover gasket set fits the folowwing BMWs with the M54 engine:

E39 525i 530i For vehicles with production date from 09/2002 
E46 325Ci 325i 325Xi 330i 330Ci 330Xi For vehicles with production date from 09/2002 
E53 X5 For vehicles with production date from 09/2002 
E60 525i 530i 
E83 X3
Z4 2.5i 3.0i

Show More Show Less
Bremmen Oil Separator Kit - Level 1 - E39 E46 E83 Z3 Z4
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:641646
Part#: 11617501566S1
Ships in 10 Business Days
Sale - Save 15% $ 95.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.59 USD
Free Shipping
Sale - Save 15%
$ 95.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.59 USD
Free Shipping
BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace all the components of the oil separator system together to prevent damage to all the aspects of your engine. Level 1 kit includes the following; Oil separator Hose from oil separator to dipstick tube Hose from oil separator to valve cover Hose from intake manifold back to the connector hose Hose from oil separator up to the intake manifold
Show More Show Less

Genuine BMW - Corporate Logo
T#:14624
Part#: 11617831930
In Stock
2% off MSRP $ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 124.99 USD
Free Shipping
2% off MSRP
$ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 124.99 USD
Free Shipping

Vents gases from the crankcase back into the intake.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Vent Hose
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54
 

 

Show More Show Less

034Motorsport - Corporate Logo
T#:568476
Part#: 034-509-3646
In Stock
$ 276.00 USD
Free Shipping
$ 276.00 USD
Free Shipping
Collapsing and worn engine mounts can mean big trouble for BMWs. The stock mounts are filled with fluid that can leak or evaporate over time. That leaves the mount unstable and too flexible to properly support the engine. The side effects of a worn engine mount are: shaking and vibrating engine, driveline twist from engine torque that can break or snap bushings, and broken motor mount arms and bolts. If you're tired of replacing engine mounts you'll be very pleased wtih these solid rubber versions. Not only are these more reliable than stock fluid-filled mounts, they are slightly stiffer than new stock mounts thanks to a solid rubber construction (no voids in the rubber) but designed for street use so they remain quiet and comfortable. The solid rubber has less deflection than a stock mount, so no wasted engine and transmission motion. Less wasted motion gives you more torque to the wheels (it's not spent twisting the engine) and better shifts.
Show More Show Less
Genuine BMW - Corporate Logo
T#:367850
Part#: 13627525015
In Stock
16% off MSRP $ 175.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 146.99 USD
Free Shipping
16% off MSRP
$ 175.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 146.99 USD
Free Shipping
This crankshaft position sensor (CPS) provides the engine computer with engine speed data via the harmonic balancer. It mounts off the engine block and reads the front crank pulley to tell the engine what position the engine internals are in. This sensor is crucial for starting the car as the ECU will not allow the engine to start without this signal.
Show More Show Less
Bosch - Corporate Logo
T#:14677
Part#: 11787558073
In Stock
$ 250.99

This product was last offered at the strikethrough price on
04-22-2026

$ 167.75 USD
Free Shipping
$ 167.75 USD
Free Shipping

Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high quality Bosch sensor to turn off your check engine light and restore fuel mileage.

This is the OEM Bosch oxygen sensor for BMW's with the N52 engine. This sensor is mounted in the rear downpipe before the catalytic converter. Bosch part number 17099. OEM replacement for BMW # 11787558073 and 11787537984.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ E89 BMW Z4 sDrive30i

Show More Show Less


VAC Motorsports - Corporate Logo
T#:7244417
Part#: VAC-OPUK-S54
In Stock
$ 274.99 USD
Free Shipping
$ 274.99 USD
Free Shipping
King - Corporate Logo
T#:4840520
Part#: CR6640XP
In Stock at Vendor
17% off MSRP $ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 148.99 USD
Free Shipping
17% off MSRP
$ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 148.99 USD
Free Shipping
These King Performance Series bearings are recommended for performance applications. These bearings are designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE or upgraded crankshafts. These King Performance Series bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. The bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow.
Show More Show Less
K&P Engineering - Corporate Logo
T#:402535
Part#: S38
Ships in 7 Business Days
$ 129.00 USD
Free Shipping
$ 129.00 USD
Free Shipping

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • Easy inspection of engine contamination
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX 
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX 
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 
2007 - 2010 E60 528i 528xi 535i 535ix 
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i 
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si 

Show More Show Less

ECS S54 VANOS Rebuild Kit - E46 M3, Z3, Z4
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:394204
Part#: 012018ECS
Ships on Nov 12, 2026
Sale - Save 9% $ 277.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 253.18 USD
Free Shipping
Sale - Save 9%
$ 277.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 253.18 USD
Free Shipping

The main reason all of the VANOS units will eventually fail is because the material used for the sealing rings from the factory is not designed for that type of environment. When this happens the only option that BMW leaves you with is buying a new and expensive VANOS unit with the same sealing rings that failed in your original unit.

The VANOS system found in BMW engines is a great feature (when it’s working properly), keeping your power curve smooth and responsive especially in lower to mid RPM range. What usually goes unnoticed is the gradual loss of power within this range as the vehicle's age due to slowly failing seals within the VANOS unit. The way the VANOS system works is based off of oil pressure triggered by a solenoid that allows for a small range of timing degree adjustment, this is where the power curve is affected. When the seals begin to fail (all of them do) there is less pressure to advance the timing reducing the power in that low to mid range. Because this happens slowly it's very hard to notice a difference until you refresh your VANOS unit, then you easily realize the response you've been missing.

There are a number of symptoms that will plague your car as a result of these failing seals such as erratic idle, engine hesitation, stalling, and increased fuel consumption to name a few. If you've been chasing down any of these symptoms with no fix then this could be your issue.

While you're replacing the seals in your VANOS unit it a good time to install anti-rattle spacers to tighten up the gaps in your stock assembly and get rid of that noisy VANOS clatter.

Seals & O-rings:

The seals  were the main focus of this project since the OE units are built with Buna-N rubber o-rings instead of the ECS supplied Viton rubber o-rings. The Buna-N material quickly hardens from the heat and chemical exposure within the engine, where the Viton is significantly more resistant to these chemicals. This knowledge was also used when it came to the commonly failed o-rings found on the VANOS seal plate, replaced at the solenoid.

Rattle Repair:

When it comes to the VANOS rattle this is commonly described as "marbles in a can", and can be heard throughout the different RPM ranges depending on the engine. These upgraded rings and washers are precision ground from hardened steel to resist wear and deformation keeping your VANOS rattle free. The rattle repair tools are designed specifically for this VANOS anti-rattle repair, design from hardened steel to stand up to the job. Designed to perfectly follow the splines of the shaft for a tight grip when applying the necessary torque to disassemble & reassemble the VANOS transfer gear. The keyed socket was designed with the intent to use a "common" wrench so this can be completed at home in your garage.    

When Servicing your VANOS unit we recommend getting everything you need to replace on the way to service which includes an oil change and valve cover gasket set. Fresh oil and gaskets is the best way to start off a fresh rebuild of any kind giving you the maximum performance of your freshly serviced components.

Don't forget to check out our rebuild PDF to make sure you have everything to get the job done and eliminate the rebuild guess work.

 

This item fits the following BMWs: 
2000-2001 E46 3 Series M3 M3 Convertible 2000-2006 
2001-2002 Z3 Roadster / Coupe Z3 M Roadster Z3 M Coupe w S54 Engine 
2006-2008 E86 E86 Z4 Z4 M Roadster Z4 M Coupe

 

Show More Show Less

Mishimoto - Corporate Logo
T#:597051
Part#: MMOCCLA
In Stock
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
OEM Bosch Ignition Coil - Set of 6 - M54 S54 BMW
For vehicles with production date up to 06/2009
Bosch - Corporate Logo
T#:340693
Part#: 12131712219
In Stock
$ 185.99 USD
Free Shipping
$ 185.99 USD
Free Shipping
Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their exacting assembly process and high level of durability you can expect a long service life from all Bosch products.
Show More Show Less

Bav Auto Tools - Corporate Logo
T#:580412
Part#: B8800104
In Stock
Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
Sale - Save 5%
$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.
Vargas Ignition Coil Kit (Red) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309610
Part#: VTT-COIL-N5X-RED
Ships on Oct 14, 2026
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

Genuine BMW - Corporate Logo
T#:7560
Part#: 22116779970
Ships in 1 day
6% off MSRP $ 160.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 151.99 USD
Free Shipping
6% off MSRP
$ 160.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 151.99 USD
Free Shipping

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E46 
Non-M
E85 Z4 2.5i/3.0i/3.0si
E89 Z4 3.0si

Show More Show Less

Genuine BMW - Corporate Logo
T#:556034
Part#: 11137548031KT1
In Stock
$ 273.85 USD
Free Shipping
$ 273.85 USD
Free Shipping

The oil pan gasket is often a failure point in N52 and N54 engines around the 80k mile mark. We recommend replacing your oil pan gasket with a Genuine BMW gasket, so you don't have to drop your subframe more than once.

Turner Motorsport's Oil Pan Gasket Replacement Kit includes everything you need to repair your leaky oil pan:

  • 7L Genuine BMW 5w-30 Oil (83212365946)
  • Genuine BMW Oil Filter Kit (11427953129)
  • Genuine BMW Replacement 1-time use bolt set (11132210959)
  • Genuine BMW Oil Pan Gasket (11137548031)
Show More Show Less
BMW N52 3.0L Ultimate Valve Cover Gasket Set
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:384225
Part#: 11127582245KT
In Stock
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

BMW N52 3.0L Ultimate Valve Cover Gasket Set is designed to provide a comprehensive solution for sealing and protecting the critical components of your engine. This complete gasket set includes the valve cover gasket, eccentric shaft sensor gasket, and VANOS solenoid gaskets, ensuring a proper seal to prevent oil leaks and maintain optimal engine performance. Perfect for BMW N52 3.0L engines, this kit from Turner Motorsport offers reliable protection against wear and tear, helping to keep your engine running smoothly and efficiently.

  • Complete gasket set for BMW N52 3.0L engines
  • Includes valve cover gasket, eccentric shaft sensor gasket, and VANOS solenoid gaskets
  • Prevents oil leaks and maintains engine performance
  • Ensures a tight seal for critical engine components
  • Helps prolong engine life and reduce maintenance issues
  • Quality parts from Turner Motorsport for dependable results

Upgrade to the BMW N52 3.0L Ultimate Valve Cover Gasket Set from Turner Motorsport for comprehensive sealing and enhanced engine protection.

Show More Show Less
ECS - Corporate Logo
T#:395066
Part#: 11241284849WPC
In Stock
Sale - Save 25% $ 188.99

This product was last offered at the strikethrough price on
06-13-2026

$ 141.74 USD
Free Shipping
Sale - Save 25%
$ 188.99

This product was last offered at the strikethrough price on
06-13-2026

$ 141.74 USD
Free Shipping

These WPC-treated bearings are the best we have seen! WPC is a shot-peening treatment at a microscopic level. It's perfect for sensitive surfaces like bearings. The WPC treatment removes imperfections and high spots, while creating a surface that retains oil better than the original surface. This greatly reduces friction. The bearings in this kit are original equipment KS bearings that are sent to WPC for treatment. The treated bearings are stronger with less metal fatigue and less friction than buying off-the-shelf bearings from the dealer.

This item fits the following BMWs: 
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix 
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1982-1988 E28 BMW 528e
1989-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i 
2004-2006 E83 BMW X3 2.5i X3 3.0i 
2000-2006 E53 BMW X5 3.0i 
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i 

Show More Show Less


Elring - OEM Cylinder Head Gasket - S54, E46M3, Z3M, Z4M
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:31632
Part#: 11127835918
In Stock
$ 98.99

This product was last offered at the strikethrough price on
08-23-2026

$ 90.99 USD
Free Shipping
$ 90.99 USD
Free Shipping
Factory Reliability for High-Revving S54 Engines - (11127835918)
Bosch - Corporate Logo
T#:348133
Part#: 12137594937T6KT
In Stock
$ 185.99 USD
Free Shipping
$ 185.99 USD
Free Shipping

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Genuine BMW - Corporate Logo
T#:33521
Part#: 11257559434
In Stock
5% off MSRP $ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 121.99 USD
Free Shipping
5% off MSRP
$ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 121.99 USD
Free Shipping


Genuine BMW Repair Kit Piston Rings - (0)
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

CTA Tools - Corporate Logo
T#:584140
Part#: CTA2112
In Stock
$ 115.45 USD
Free Shipping
$ 115.45 USD
Free Shipping
Replaces valve springs and valve stem oil seals without the need to remove the cylinder head

Genuine BMW - Corporate Logo
T#:367827
Part#: 13537546244
Ships in 1-2 days
6% off MSRP $ 264.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD
Free Shipping
6% off MSRP
$ 264.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:19361
Part#: 11121735180
Ships in 1 day
4% off MSRP $ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD
Free Shipping
4% off MSRP
$ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD
Free Shipping


Genuine BMW Non-Return Valve
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

Genuine BMW - Corporate Logo
T#:12510
Part#: 13537546245
Ships in 1-2 days
6% off MSRP $ 264.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD
Free Shipping
6% off MSRP
$ 264.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD
Free Shipping


Genuine BMW Injection Valve -
This item fits the following BMW Chassis:
E39,E46,E53 X5,E83 X3,E85

Fits BMW Engines including:
M54

Genuine BMW - Corporate Logo
T#:348666
Part#: 11812283798
Ships in 1 day
9% off MSRP $ 209.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 189.99 USD
Free Shipping
9% off MSRP
$ 209.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 189.99 USD
Free Shipping
With exposure to heat and elements, your motor mounts will break down with increasing age. A secure mount is vital to reduce drivetrain vibration and transfer as much horsepower to the wheels as possible. These mounts are an upgrade for non-M E36/E46 owners seeking a stiffer mount without sacrificing comfort and ride quality.
Show More Show Less

Bav Auto Timing Tool Kit
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580365
Part#: B8800041
In Stock
Sale - Save 5% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.44 USD
Free Shipping
Sale - Save 5%
$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.44 USD
Free Shipping
Lock your camshafts in place when servicing your timing system to prevent future timing issues.

BE Bearings - Corporate Logo
T#:403644
Part#: SP1534HKSTDS54
Ships on Oct 27, 2026
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
NOTE: These bearings are now sold as SP1534F which features a new and improved silver oxide coating that is stronger and more durable! Designed and manufactured by Clevite to BE Bearing specifications. These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure. Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil. These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating. Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended). Designed with extra clearance to "fix" the BMW rod bearing design flaw. Designed for use with factory 10W60 weight oils. Tri-Armor coated for low conditions during cold start Ideal for start-stop vehicles Applicable for BMW engines S54 Standard size Sold as complete set (6-cylinders) Fits the following BMWs: 2002-2006 E46 BMW M3 S54 2002-2003 Z3 BMW M Coupe, M Roadster S54 2006-2008 Z4 BMW M Coupe, M Roadster S54
Show More Show Less
Genuine BMW - Corporate Logo
T#:34697
Part#: 11367836050
In Stock
$ 399.99 USD
Free Shipping
$ 399.99 USD
Free Shipping


Genuine BMW Pressure Accumulator
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Genuine BMW - Corporate Logo
T#:213898
Part#: 11318648732
In Stock
7% off MSRP $ 128.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
7% off MSRP
$ 128.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
Genuine BMW Timing Chain - 11318648732


Continental - Corporate Logo
T#:21686
Part#: 11377524879
Back Ordered
$ 279.99 USD
Free Shipping
$ 279.99 USD
Free Shipping

This sensor monitors the position of the Valvetronic eccentric shaft and feeds data back to the ECU. The common issue with this sensor is that it gets contaminated with oil and fails. It doesn't give a fault code or check engine light, however. What you would notice is sluggish driving, hesitation, poor performance, jerky shifts from an automatic, and other drivability issues. These types of issues are typically diagnosed as ignition coils (which are their own issue altogether) but this sensor may also be faulty.

The eccentric shaft sensor is located at the front of the cylinder head and is only accessible with the valve cover off. It's easy to check for oil by removing the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside, or even on the valve cover itself, the sensor is likely contaminated or ready to fail. You can wipe or clean the oil from sitting inside the sensor but it will come back.

If you're planning this job make sure you have our Valve Cover Overhaul Kit, which includes a new seal for the eccentric sensor as well as the rest of the valve cover and Valvetronic gaskets. You can add the valve cover set from the options below.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2011 F25 BMW X3 xDrive28i
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less
Genuine BMW - Corporate Logo
T#:12448
Part#: 11127832034
In Stock
2% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
2% off MSRP
$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
GENUINE BMW PROFILE-GASKET:118522 - We recommend getting the full S54 valve cover gasket kit that includes spark gaskets and additional parts.
Show More Show Less