BMW Engine Parts for BMW Z Series E85/6 (2003-2008)

The 12 Piece 3/8" Drive Magnetic Spark Plug Socket Set from VIM Tools is expertly designed for effortless spark plug removal and installation. Each of the 12 magnetic sockets in this set features a satin finish and is equipped with magnetic rings to securely hold the spark plug in place during use.

The sockets are neatly organized in a black and green EVA foam tray with clearly labeled sizes for quick identification.

The set includes a variety of socket types—metric, SAE, 6-point, 12-point, standard length, extra deep, thin wall, universal joint, and dual drive—making it versatile enough for use in a wide range of domestic and imported vehicles.

The spring-loaded universal joint design allows for easy access to spark plugs in tight or confined spaces, while the knurling on the socket body provides extra grip for hand turning. The 12-point 14mm sockets are easily distinguishable by their double knurling, saving you time on the job. Additionally, the dual drive feature lets you use either a 3/8" drive ratchet or a wrench for added flexibility.

Key Features:

• Magnetic Ring Inserts: Securely hold spark plugs in place for easy removal and installation.
• Versatile Socket Set: Includes metric, SAE, 6-point, 12-point, standard length, extra deep, thin wall, universal joint, and dual drive sockets.
• Spring-Loaded Universal Joint: Provides easy access to spark plugs in confined spaces and prevents loosening.
• Knurled Grip: Single and double knurling on socket bodies for better hand-turning control.
• Convenient Organization: Sockets are laid in a black and green EVA foam tray with labeled sizes for quick identification.
• Dual Drive Capability: Allows use with both a 3/8" drive ratchet and a wrench.

Includes:

**Note: All sockets are magnetic and 3/8" Drive**

• 9/16"
• 5/8"
• 14mm
• 13/16"
• 16mm Thin Wall 6 Point
• 14mm Thin Wall 12 Point
• 9/16" Spring-Loaded UJ
• 5/8" Spring-Loaded UJ
• 14mm Spring-Loaded UJ
• 9/16" Extra Deep 6" OAL
• 14mm Extra Deep 6" OAL 12 Point

The NOCO GBC010 12V Accessory Kit is designed to connect directly to the XGC IN and OUT ports of NOCO Boost jump starters. This kit allows you to effortlessly power your preferred 12-volt devices directly from a GB70, GB150, GB250+, GB251+, or GB500+, such as a tire inflator, vacuum, coffee maker, fan, cooler, and more. Constructed from high-conductivity 16AWG 100% copper wire, it boasts a rated capacity of 15 amperes.

Features: 

• Recharge NOCO Boost UltraSafe Lithium Jump Starters from a vehicles 12-volt power source.
• Compatible with NOCO Boost UltraSafe Lithium Jump Starter models GB70, GB150 GB250+, GB251+ and GB500+.
• Power 12-volt device like a tire inflator, vacuum and more.
• High-conductivity 16 AWG copper wire and rated capacity of 15-amperes.
• Molded strain reliefs prevent unwanted strain on the XGC wire connections.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The GENPRO10X2 is an upgraded version of our GEN2 with enhanced features. This model is 19% smaller yet delivers 33% more power, making it one of the most high-performing onboard marine battery chargers NOCO has ever produced. It's a two-bank onboard battery charger with a 20-amp rating (10 amps per bank) designed for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. You can independently charge and control each battery bank using selectable charging modes such as 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, suitable for all types of lead-acid and lithium-ion batteries.

Features: 

• A two-bank on-board battery charger rated at 20-amps for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
• Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid batteries.
• An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
• Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
• Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
• It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.
• A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise.
• A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.