BMW Engine Parts for BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Genuine BMW - Corporate Logo
T#:615
Part#: 11142249533
In Stock
$ 101.95 USD
Free Shipping on orders $49 and up
This Genuine BMW updated rear main seal fits many BMW's. It is less likely to leak under "extreme" conditions. The E30 M3 tends to leak from the rear main seal.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i 323i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 535i M5
1997-2003 E39 BMW 525i 528i 530i
1982-1989 E24 BMW 633csi 635csi M6
1981-1987 E23 BMW 733i 735i
2004-2006 E83 BMW X3 2.5i X3 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
2003-2006 Z4 BMW Z4 2.5i Z4 3.0i
2006-2008 Z4 BMW Z4 M Roadster M Coupe
Show More Show Less
ARP - Corporate Logo
T#:3631
Part#: 201-4303
In Stock
$ 247.99 USD
Free Shipping
$ 247.99 USD
Free Shipping
Virtually every top professional BMW engine builder relies on ARP Pro Series head studs, particularly on the S54 3.2 liter engine. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best S54 head studs we've found for the E46 M3 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.​

These head studs fit the following BMWs/engines
2001-2006 E46 M3 coupe & convertible
2001-2002 MZ3 M Roadster & M Coupe (with S54 engine)
2006-2008 MZ4 Z4 M Roadster & M Coupe
Show More Show Less
CTA Tools - Corporate Logo
T#:640924
Part#: CTA4329
In Stock
$ 24.28 USD
Free Shipping on orders $49 and up
Swivel Spark Plug Socket 16MM

Camshaft Position Sensor - Priced Each
Two required per engine, may be replaced separately as needed.
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:27105154
Part#: 13627525014
In Stock
Sale - Save 17% $ 41.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.84 USD
Free Shipping on orders $49 and up
Sale - Save 17%
$ 41.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.84 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:25772530
Part#: 11142247867KT3
In Stock
$ 143.99 USD
Free Shipping on orders $49 and up
This the the rear crankshaft / main seal kit that includes the rear seal 11142249533, gasket 11141432240, hex bolts 071199905400, hex bolts 07119905530.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2001-2006 E46 BMW M3
1997-1998 E39 BMW 528i
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Bremmen Parts - Corporate Logo
T#:640146
Part#: 12141709616
In Stock
Sale - Save 10% $ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.99 USD
Free Shipping on orders $49 and up
This is the crank shaft position sensor. It provides information for the ECU. A faulty sensor can cause issues with timing adjustment and limit performance and vehicle operation. Replace your sensor with a high-quality Bremmen sensor to restore peak performance.
Show More Show Less

Bremmen Crankcase Vent Hose - E60 E70 E82/88 E9X N52 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:640155
Part#: 11157559528
In Stock
Sale - Save 20% $ 48.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.16 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 48.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.16 USD
Free Shipping on orders $49 and up
This valve cover vent hose helps to vent the crankcase fumes on BMW's with the N51 / N52 6 cylinder engines. If replacing the valve cover, we recommend purchasing this item as well as it often will break while removing it from the valve cover.
Show More Show Less
Genuine BMW - Corporate Logo
T#:21688
Part#: 11411317650
In Stock
$ 21.21 USD
Free Shipping on orders $49 and up
When replacing the oil pump or the oil pump chain we recommend replacing the S54 oil pump chain tensioner.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 E36/7 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

E46 M3 / MZ4 Rod Bearing Overhaul Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:392550
Part#: S54RBPDK
In Stock
Sale - Save 1% $ 455.99

This product was last offered at the strikethrough price on
08-26-2026

Starting at $ 452.97 USD
Free Shipping
Sale - Save 1%
$ 455.99

This product was last offered at the strikethrough price on
08-26-2026

Starting at $ 452.97 USD
Free Shipping
Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).
Show More Show Less

Spark Plugs - Set Of Six (ILZFR6D11) - N52 3.0L
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:370526
Part#: ILZFR6D11KT6
Ships in 5 Business Days
$ 130.99

This product was last offered at the strikethrough price on
05-07-2026

$ 77.99 USD
Free Shipping
$ 77.99 USD
Free Shipping

Revitalize your BMW's performance by addressing poor idle, fuel inefficiency, and engine misfire issues caused by worn-out spark plugs. NGK offers the ultimate solution with their high-quality aftermarket spark plugs. Over time, electrode wear leads to increased gaps and weakened sparks, while carbon buildup can impair performance. These upgraded plugs are designed to restore power, fuel efficiency, and smooth out an irregular idle, ensuring optimal engine functionality.

  • Solves poor idle, low fuel efficiency, and engine misfire problems
  • Enhances engine power and fuel efficiency
  • Addresses electrode wear and carbon buildup issues
  • Ensures quality NGK replacement for improved performance
Show More Show Less
Genuine BMW - Corporate Logo
T#:12497
Part#: 11367585425
In Stock
$ 264.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 250.33 USD
Free Shipping
$ 250.33 USD
Free Shipping

The VANOS system on your N51, N52, and N54 engine controls the valve timing inside the engine. The system is hydraulically operated based on instructions from the engine computer. It's very complex and BMW has not yet perfected the system. The VAN0S solenoid is the actuator that takes instruction from the ECU and activates the VANOS unit on the front of the engine. When the solenoid is failing (or failed) you can end up with a rough running engine, misfires, bad fuel economy, lack of power, and more. It should trigger multiple fault codes and a check engine light for misfires, camshaft control, VAN0S solenoid, boost pressure control, and maybe others. It's important to thoroughly troubleshoot fault codes but VAN0S solenoids are a known issue with these engines.

The VANOS solenoids are located on the front of the engine and may be replaced without removing many other components. In some cases, you may be able to remove the suspect one, clean it, reinstall, and reset your fault codes. If your fault codes come back it's a strong indication that a replacement is required. Or you can buy the new solenoid and replace instead of doing the work twice.

VANOS solenoid for the intake and exhaust are the same part number. Order 2 if you want to replace them both.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

We recommend replacing the solenoid sealing gaskets as well when replacing the solenoid. You can find these under T#363393

This item fits the following BMWs:
2008-2012 E82 BMW 128i 1M Coupe
2008-2010 E82 BMW 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335is - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335is - Coupe
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E93 BMW 335i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009-2011 Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less
Genuine BMW Oil Filter Kit - M52 M54
Exclusively for the M54 engine, this filter is not for N52 equipped Z4 models.
Genuine BMW - Corporate Logo
T#:360649
Part#: 11427512300
In Stock
16% off MSRP $ 27.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.34 USD
Free Shipping on orders $49 and up
16% off MSRP
$ 27.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.34 USD
Free Shipping on orders $49 and up


Comprehensive Constant Pressure Valve Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:557341
Part#: 11111318185TMSKT
In Stock
Sale - Save 2% $ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping
Sale - Save 2%
$ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

Show More Show Less
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less
Genuine BMW - Corporate Logo
T#:19197
Part#: 11137548031
In Stock
18% off MSRP $ 71.67

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.95 USD
Free Shipping on orders $49 and up
18% off MSRP
$ 71.67

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.95 USD
Free Shipping on orders $49 and up
This is the Genuine BMW engine oil pan gasket for cars with the N52 and N54 6 cylinder engines. This gasket goes between the engine block and the oil pan and requires replacing the aluminum oil pan bolts.

Oil Pan Bolts for E82, E90, E92, E93, E85, E89 models with MANUAL Transmission are Part # 11130396707.
Oil Pan Bolts for E82, E60, E70, E71, E85, E89, E90, E92, E93 models with AUTOMATIC Transmission are Part # 11132210959.
available for purchase below

This item fits the following BMWs:
2008-2010 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335is - Coupe
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335is- Convertible
2007-2010 E93 BMW 335i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2008-2010 E71 BMW X6 xDrive35i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less

ECS - Corporate Logo
T#:20979672
Part#: 6PK1460
Ships on Nov 12, 2026
$ 33.99 USD
Free Shipping on orders $49 and up
Replaces BMW # 11287837898 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.
Show More Show Less

Achilles Motorsports - Corporate Logo
T#:1150766
Part#: 11-AM-OPB-M54
In Stock
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
SpecE46 Legal! The Achilles Motorsports Oil Pan Baffle was designed and manufactured to be used on racing, high-performance track, and street driven cars. Each baffle is precision laser cut from .090" heat-treated aluminum then hand-assembled and test fit to ensure accuracy and ease of installation. Achilles Motorsports' baffle design incorporates dual trap doors and a unique oil deflector that prevents oil from splashing out of the sump under hard braking. Together, these help minimize the sloshing of the oil inside the oil pan and keep oil accumulated around your pickup tube. The factory BMW oil pan doesn't do a very good job of keeping oil accumulated around the oil pick-up tube in high g-force situations. By keeping oil accumulated around the pickup tube you can eliminate the costly loss of oil pressure and potential damage to other vital engine parts commonly caused by high g-forces from hard acceleration and braking and high-speed cornering. Professional welding is required for installation! For use with BMW oil pan: 11131432703 During installation, while the oil pan is removed, we HIGHLY RECOMMEND upgrading your factory oil pump with the Achilles Motorsport Upgraded Oil Pump Shaft Kit (T#1150773). After numerous instances of sheered-off oil pump shafts and oil pump nuts coming loose, resulting in an instant loss of oil pressure, Achilles decided to come up with a solution - Don't let it happen to you!
Show More Show Less
Schwaben Camshaft Timing Tool - M50 M52 S50 S52 M42 M44
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:378974
Part#: 003304SCH01A
In Stock
Sale - Save 10% $ 119.99

This product was last offered at the strikethrough price on
09-23-2026

$ 107.99 USD
Free Shipping
Sale - Save 10%
$ 119.99

This product was last offered at the strikethrough price on
09-23-2026

$ 107.99 USD
Free Shipping

If you have ever attempted to do a valve job or cylinder head gasket project on an M42, M44, M50, or M52 engine you know that the repair manual will refer to the special BMW timing tool kit. This tool kit includes a flywheel locating lock pin, and a special set of camshaft locators that lock the cams in a precise location. The tools are very easy to install. The kit is specifically designed to hold the engine and cams in proper timing during the cylinder head removal and re installation process. This avoids the chance of bending the valves doing the head install process. The precision ground holding blocks lock over the square ends of both intake and exhaust cams. The CNC machined flywheel locating pin passes through a hole in the rear of the engine block and passed through a machined hole in the flywheel.

To avoid improper cam timing on the latest BMW engines, the factory has devised a cam timing system that locks the crankshaft and cams into a specific position prior to cylinder head removal. This method was devised to avoid any misalignment, resulting in piston to valve damage. Unfortunately without these tools re-timing the camshafts after a valve job is almost impossible. The factory specification manual does not supply installation specifications. This cam timing kit includes all the necessary components to do the job.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi


NOTE: Not compatible with S50B30 and S50B32 Euro engines!If you have ever attempted to do a valve job or cylinder head gasket project on an M42, M44, M50, or M52 engine you know that the repair manual will refer to the special BMW timing tool kit. This tool kit includes a flywheel locating lock pin, and a special set of camshaft locators that lock the cams in a precise location. The tools are very easy to install. The kit is specifically designed to hold the engine and cams in proper timing during the cylinder head removal and re installation process. This avoids the chance of bending the valves doing the head install process. The precision ground holding blocks lock over the square ends of both intake and exhaust cams. The CNC machined flywheel locating pin passes through a hole in the rear of the engine block and passed through a machined hole in the flywheel.

 

Show More Show Less

Rogue Engineering - Corporate Logo
T#:567568
Part#: S54VAN
Back Ordered
$ 59.00 USD
Free Shipping
$ 59.00 USD
Free Shipping
Now that BMWs popular S54 engine (found in the 2001-06 BMW M3, 2001-02 MZ3 and 2007-08 MZ4) are getting older, it's important to keep an eye on particular items. One such point is the S54 Vanos oil line. Normally thought of as a worry-free item, it has proven to put the damper on many track days. Rogue's stainless steel braided VANOS line replaces the factory BMW part number 11367837614 (current MSRP from BMW is $128.08!) The high pressure (1200psi) control system of the S54 vanos system is used to ensure responsive and accurate camshaft adjustments. The added complexity of the high oil pressure used on the S54 vanos means more opportunities for failures. Some customers have encountered the high pressure hardline fail at the track, spraying oil all over their engine compartment, ending their day. Rogue Engineering's S54 Vanos Oil Line is built in their Upper Saddle River, NJ facility, and tested to over 3000psi. Using their stainless steel braided hose with the proper banjo fittings, this a direct replacement for the factory line. Like the factory line, the lower portion of the line uses a heat sleeve from additional heat from the VANOS pump itself. Fits the following BMWs: 2001-06 BMW E46 M3 2001-02 BMW MZ3, including coupe and convertible 2007-08 BMW MZ4, including coupe and convertible
Show More Show Less
Genuine BMW Front Crankshaft Seal
For vehicles with a production date from 02/2011
Genuine BMW - Corporate Logo
T#:187246
Part#: 11118618864
In Stock
28% off MSRP $ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.79 USD
Free Shipping on orders $49 and up
28% off MSRP
$ 55.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.79 USD
Free Shipping on orders $49 and up
Genuine BMW Shaft Seal

Bosch - Corporate Logo
T#:394329
Part#: SR0492N
In Stock
$ 249.17

This product was last offered at the strikethrough price on
08-14-2026

$ 237.99 USD
Free Shipping
$ 237.99 USD
Free Shipping

If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. OEM replacement for the original BMW part # 12411312104 and 12411312130. This is a NEW, not used, component with no included core charge!

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

We recommend replacing hardware when doing your starter, since the bolts are aluminum and threads become stretched: Genuine BMW aluminum starter hardware set 12410392577 

 

Used on a wide variety of models with the BMW N52, N54, and N55 engines, including: E9X, F01/02, F07/10, E8X, E70, E60/61, F25, F30, and Z4.

Show More Show Less

Bimmerworld - Corporate Logo
T#:1120864
Part#: 100.11.530.0003
In Stock
$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping

Upgrade your BMW's oil pressure sensor setup with the Oil Distribution/Sending Block. This versatile block is designed to mount in the stock oil pressure sensor location on the oil filter housing or in the original location on the engine block. It allows the use of up to two aftermarket sending units (not included) along with the factory sensor, providing accurate pressure and temperature measurements. Engineered for reliability and cleanliness, it ensures a reliable setup for your BMW's oil pressure monitoring needs.

  • Mounts in stock oil pressure sensor location for easy installation
  • Allows use of up to two aftermarket sending units in addition to the factory sensor
  • Incorporates factory sending unit for utilizing the factory oil pressure light
  • Threaded for one M12x1.5 port and two 1/8th NPT ports for versatility
  • Includes banjo bolt and crush washers for secure installation
  • Compatible with various BMW engines including M20, M42, M50, M52, M54, N52, N54, S50, S52, S54, S65, M10, S14, and M30
Show More Show Less
Genuine BMW - Corporate Logo
T#:360581
Part#: 11127509328
In Stock
9% off MSRP $ 39.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 35.47 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 39.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 35.47 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:32404
Part#: 11211439395
In Stock
4% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD
Free Shipping on orders $49 and up


Genuine BMW Hex Bolt
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N,N54,N54T

Show More Show Less


Oil Pan Gasket - With Bolts - N52 & N54 3.0L
For automatic transmissions Only!
Genuine BMW - Corporate Logo
T#:24677028
Part#: 11132210959KT2
In Stock
$ 127.99 USD
Free Shipping on orders $49 and up
$ 127.99 USD
Free Shipping on orders $49 and up

Enhance Your BMW's Engine Performance with Genuine Oil Pan Gasket - With Bolts Kit

Upgrade your BMW's oil pan gasket with the Genuine part number 11132210959 kit. This essential component is prone to leakage over time, affecting engine performance.

Addressing this issue offers several benefits:

  • Genuine part ensures quality and compatibility.
  • Prevents oil leaks for improved engine performance.
  • Comprehensive kit includes necessary bolts for installation.
  • Long-lasting solution for maintaining optimal engine functionality.

Maintain your BMW's engine health by replacing the oil pan gasket with this Genuine kit.

Show More Show Less
N52 Valvetronic Camshaft Adjuster Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5416764
Part#: 11377548388TMSKT
In Stock
Sale - Save 19% $ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD
Free Shipping
Sale - Save 19%
$ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD
Free Shipping
Includes new Valvetronic motor, gasket, and hardware. The Valv-tronic adjuster unit changes the the timing shaft to adjust the valve timing.
URO - Corporate Logo
T#:578702
Part#: 22116760330
In Stock
$ 52.99 USD
Free Shipping on orders $49 and up
Don't neglect your motor mounts! Most stock BMW motor mounts are fluid-filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is significantly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine moves around, it can contact other parts in the engine bay - usually cooling-related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).
Show More Show Less

Elring - Valve Cover- BMW N52 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2438600
Part#: 11127552281
In Stock
$ 325.99

This product was last offered at the strikethrough price on
06-05-2026

$ 274.99 USD
Free Shipping
$ 274.99 USD
Free Shipping
A complete valve cover assembly with bolts and gaskets

Braille - Corporate Logo
T#:558037
Part#: B14115
Ships in 5 Business Days
$ 204.99 USD
Free Shipping on orders $49 and up
When building a car for the track, one of the most important factors to consider is weight. Stock batteries can weigh up to almost 50 pounds and are unnecessarily large, designed to power a host of systems not normally used in a track car (radios, lighting, etc.). What can you do to cut weight the weight without affecting your cars operation? This is where Braille Battery comes in with their long line of performance lightweight battery options! Designed to provide the highest cranking power possible while being up to 75% lighter, Braille Battery is one of the foremost leaders in automotive racing batteries with nothing but high quality, high output batteries in mind!
Show More Show Less
King - Corporate Logo
T#:3929159
Part#: CR222SV0.5
In Stock at Vendor
18% off MSRP $ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD
Free Shipping on orders $49 and up
18% off MSRP
$ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD
Free Shipping on orders $49 and up

BMW N20 N52 N54 N55 S55 Connecting Rod Bearing Set of 2 Pairs - 0.50mm Oversized is designed to elevate your engine’s performance and reliability. Developed with high-performance driving in mind, this connecting rod bearing set from Turner Motorsport offers superior durability and support. Each set includes 2 upper and 2 lower bearing shells, crafted from a lead-free, silver-based tri-metal material that is specifically engineered for extreme load applications. These bearings are meticulously designed to meet exact standards, ensuring optimal fitment and compatibility with your BMW engine, resulting in smoother and more reliable operation.

  • Enhanced Engine Performance: Provides superior support and stability for high-performance driving.
  • Durable Construction: Lead-free, silver-based tri-metal material designed for extreme loads.
  • Precise Fitment: Engineered to exact standards for compatibility with BMW N20, N52, N54, N55, and S55 engines.
  • Improved Reliability: Ensures smoother engine operation and reduced wear over time.
  • Complete Set: Includes 2 upper and 2 lower bearing shells for 2 connecting rods.
Show More Show Less

Genuine BMW - Corporate Logo
T#:34525
Part#: 11347830888
Ships in 1-2 days
16% off MSRP $ 88.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.80 USD
Free Shipping
16% off MSRP
$ 88.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.80 USD
Free Shipping


Genuine BMW Exhaust Valve - 30,5/5,95mm
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Show More Show Less
Oil Pan Gasket
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:26305093
Part#: 11137548031
In Stock
Sale - Save 19% $ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.99 USD
Free Shipping on orders $49 and up


Oil Level Indicator - 12617607910
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:36913378
Part#: 12617607910
In Stock
Sale - Save 15% $ 153.99

This product was last offered at the strikethrough price on
05-03-2026

$ 130.89 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 153.99

This product was last offered at the strikethrough price on
05-03-2026

$ 130.89 USD
Free Shipping on orders $49 and up
The engine oil level sensor tracks the oil level in the engine's oil pan, sending real-time data to the ECU (Engine Control Unit). This vital information ensures the engine has the right amount of oil for proper lubrication. Commonly featured in modern vehicles, the oil level sensor acts as an essential safeguard against low oil levels, helping prevent potential engine damage.
Show More Show Less
Genuine BMW - Corporate Logo
T#:11936
Part#: 11367831906
In Stock
7% off MSRP $ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.95 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.95 USD
Free Shipping on orders $49 and up
This sealing flange is located between the VAN0S adjusting unit and the VAN0S solenoid on the S54 engine. It can be the source of oil leaks and should be replaced when the the VANOS solenoid is.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe (S54)
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Bavarian Autosport - Corporate Logo
T#:17871153
Part#: 11211719984
In Stock
Sale - Save 20% $ 63.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.19 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 63.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.19 USD
Free Shipping on orders $49 and up
This lower timing chain sprocket is located behind the crank pulley, directly on the crankshaft.


Genuine BMW - Corporate Logo
T#:21328
Part#: 61366915327
In Stock
$ 27.99 USD
Free Shipping on orders $49 and up
Commonly used in multiple BMWs, usually controlling fuel pump operation.
Genuine BMW - Corporate Logo
T#:183226
Part#: 12618611273
In Stock
19% off MSRP $ 34.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.87 USD
Free Shipping on orders $49 and up
19% off MSRP
$ 34.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.87 USD
Free Shipping on orders $49 and up


Genuine BMW Oil Pressure Switch - M12X1,5
This item fits the following BMW Chassis:
E39 M5,E46 M3,E82 1M Coupe,E85 Z4M,E53 48IS,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F30,F31,i3

Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:7244442
Part#: FXXOFH-R
In Stock
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping
OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Performance RED Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.
Show More Show Less

Genuine BMW - Corporate Logo
T#:406035
Part#: 11141432240
In Stock
2% off MSRP $ 25.70

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.29 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 25.70

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.29 USD
Free Shipping on orders $49 and up

DeatschWerks 340 LPH In-Tank Fuel Pump with a Universal Set Up Kit ...
This is Universal and Not a direct replacement for the Genuine Pump!
DeatschWerks - Corporate Logo
T#:6091453
Part#: 9-301-1000
In Stock
$ 169.00 USD
Free Shipping
$ 169.00 USD
Free Shipping
DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. The DW300 is DeatschWerks' flagship standard fitment in-tank pump. The DW300 flows 340lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. All DW fuel pumps are backed by a 3-yr no fault warranty. Features: Weight 12.6 oz (360grams) 7.7mm ID/11mm OD inlet fitting Outlet 5/16" Hose Clamp Single Scroll Composite Turbine All instructions are also provided on DeatschWerks' website.
Show More Show Less
Glyco - Corporate Logo
T#:375825
Part#: 11241284849
Ships in 1 Business Day
$ 92.02

This product was last offered at the strikethrough price on
07-15-2026

$ 85.59 USD
Free Shipping on orders $49 and up
$ 85.59 USD
Free Shipping on orders $49 and up
Standard bore - 45mm

Crankshaft Socket - S54 / B46 / B48 / B58
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:2181320
Part#: LCB226SCH
In Stock
Sale - Save 25% $ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 44.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 44.99 USD
Free Shipping on orders $49 and up

Enhance BMW engine maintenance with the Crankshaft Socket - B46 / B48 / B58, an essential tool for effortless engine rotation during timing jobs or valve timing adjustments.

  • Specifically designed for BMW B46, B48, and B58 engines
  • Facilitates easy and precise engine rotation
  • Ideal for timing jobs and valve timing adjustments
  • Ensures proper alignment and maintenance accuracy

Upgrade your BMW maintenance toolkit with the Crankshaft Socket, providing the necessary precision for timing tasks and valve adjustments on B46, B48, and B58 engines.

Show More Show Less
BMW E8X E9X Billet Aluminum Radiator Drain Plug
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:367075
Part#: 013197ECS01A
In Stock
Sale - Save 25% $ 47.99

This product was last offered at the strikethrough price on
06-13-2026

$ 35.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 47.99

This product was last offered at the strikethrough price on
06-13-2026

$ 35.99 USD
Free Shipping on orders $49 and up

Ensure your BMW's cooling system stays in top shape with ECS Tuning's Billet Aluminum Radiator Drain Plug. Designed specifically for late-model 1-Series and 3-Series BMWs, this replacement plug addresses the common issue of weak plastic drain plugs. Constant exposure to engine heat and road debris makes the plastic plugs brittle, leading to frustration with broken plugs. ECS Tuning's billet aluminum alternative puts an end to these problems.

  • Durable Replacement: Say goodbye to weak plastic drain plugs.
  • Enhanced Material: Billet aluminum provides superior strength and longevity.
  • Deeper Screw Head: Accommodates Phillips head or flat head screwdrivers for better engagement.
  • Reduced Stripping Risk: Minimize the chance of stripping out the screw head.

Don't let cooling system maintenance be a hassle. Order ECS Tuning's Billet Aluminum Radiator Drain Plug now and experience worry-free service.

Show More Show Less

ECS - Corporate Logo
T#:383333
Part#: 003779ECS06KT
In Stock
Sale - Save 25% $ 95.99

This product was last offered at the strikethrough price on
06-13-2026

$ 71.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 95.99

This product was last offered at the strikethrough price on
06-13-2026

$ 71.99 USD
Free Shipping on orders $49 and up
If you don't wish to fabricate intricate brackets to mount your ECS Baffled Oil Catch Can we have the solution. ECS's three-piece bracket kit includes two options for securing the catch can. Choose from either a flat parallel mounting plate or a bent 90° mounting plate to give you 360° rotation for an infinitely adjustable mounting location.
Show More Show Less

King - Corporate Logo
T#:25706115
Part#: MB7039AM
In Stock
13% off MSRP $ 207.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 179.99 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 207.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 179.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:12620
Part#: 11127832157
In Stock
6% off MSRP $ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 46.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 46.99 USD
Free Shipping on orders $49 and up
This is a Genuine BMW replacement oil cap.
Genuine BMW - Corporate Logo
T#:14837
Part#: 12410392577
In Stock
2% off MSRP $ 24.30

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.89 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 24.30

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.89 USD
Free Shipping on orders $49 and up

Turner recommends replacing these bolts when replacing your starter as these bolts are aluminum and torque to yield - making them one time use bolts.

We recommend the Bosch replacement starter to get your vehicle back on the road.

Show More Show Less


Elring Valve Cover Gasket Set - M54 2.5L 3.0L (09/2002+)
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362106
Part#: 11120030496
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

  • Valve cover gasket
  • Spark plug seals

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M54 2.5L 3.0L (09/2002+)

Show More Show Less
Genuine BMW - Corporate Logo
T#:21680
Part#: 11317830159
In Stock
$ 41.78 USD
Free Shipping on orders $49 and up


Genuine BMW Chain Tensioner
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54