BMW Performance Chips & Software for BMW 1 Series

BMS Pedal Tuner - N52, N54, N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55 (Manual Transmission)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20155613

Part#: BMSPBT-M

Ships on Jul 21, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Burger Motorsports JB4 Tuner - N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
NOT FOR SALE OR USE IN CALIFORNIA!

T#:402621

Part#: JB4N54

In Stock

$ 479.00

This product was last offered at the strikethrough price on
05-19-2026

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA!

Show More Show Less

Burger Motorsports JB4 Tuner - Type B Harness - E82 E88 E90 E92 E93 N...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:402616

Part#: JB4-N55-B

Ships in 1 Business Day

$ 559.00 USD

Add to Wish List

Qty

$ 559.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! Fits the Following BMWs: E82 E88 E90 E92 E93 - N55 3.0 liter - With harness type B, Mid-2012+

Show More Show Less

Cobb Tuning AccessPort V3 - 135i 1M 335i 535i Z4 35i/is (N54 Engine 2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:183977

Part#: AP3-BMW-001

In Stock

$ 715.00 USD

Add to Wish List

Qty

$ 715.00 USD

Add to Wish List

THE EASIEST WAY TO 85+ HP ON THE N54 TWIN-TURBO!
HP gain = 85+ hp
Trq gain = 100+ ft-lbs
Plug-In Power! Easy to use and completely reversible!
Expect higher gains with additional modifications

New Features
Larger, full color, higher resolution screen
We super sized the screen for ease of use and better monitoring. Full text help menus, multi-gauge layouts, full map descriptions and more. This screen has room to spare - so no need to run back to your laptop.

Customizable multi-gauge display
Want gauges? No problem. The V3 now supports up to 6 fully customizable gauges with 1/1000 resolution. Monitor all the parameters you want to see and customize each layout for street, strip or track.

In vehicle mount, with on/off switch
There is nothing we like more to see than an AP peeking over the dash. With the on/off button and using the included universal mount or vehicle specific options, there is no reason not to run your AP in-vehicle.

Faster and easier to use with a familiar face
We listened to what you wanted. Use your same maps, monitor your same parameters, and troubleshoot your same codes, but now with more. More speed, more memory, more map storage, more live gauges, and more troubleshooting help.

Interchangeable faceplates
Is it your Accessport or our Accessport? It's yours. Customize it as you see fit. The new V3 comes with 2 interchangeable bezels, blue and grey, or put your own touches on one.

The Cobb Tuning AccessPort is a flashing tool that installs performance software through the OBD port on your car. No other software is as easy to use and install! If you can program a TV remote, you're over-qualified to install this software. Just plug the AccessPort into the OBDII port under the dash, bring up the AccessPort onscreen menu, select from a variety of engine maps for your desired performance and install. It's that easy. The software is from COBB Tuning - one of the most accomplished software tuners in the business. The Cobb software replaces the conservative factory settings with different maps to make more power.

The AccessPort maintains the sophisticated control logic, refined engine response and excellent driveability of the stock BMW computer while providing impressive power gains and improved performance. Pre-loaded on the AccessPort are engine maps for 91 or 93 octane fuel, and a valet mode, with the capacity to hold up to 100 other tuning files! The AccessPort also saves your stock tune for you to revert back to factory settings at any time. It also has the the ability to download additional maps so that you can run various upgrades with the correct software tune. Additional tunes are available direct from Cobb through their AccessPort manager program (available for PC or OSX). Cobb also provides tech support.

In addition to the performance improvements, the AccessPort includes a variety of other useful tools -
+ performance measurements
+ data logging - up to 10 hours
+ fault code/DTC reading and clearing
+ check/verify performance modifications - measures 0-60 and � mile times and can measure approximate HP

The AccessPort can display boost pressure, oil temperature, pedal position, load, individual cylinder timing, and other engine data channels with the Live Data feature.

Tutorial Videos:

Simple Installation
Firmware Update
Change Map
Performance

Live Data
Data Logging
Trouble Codes
Uninstall

Typical Performance Gains:
135i 335i 335xi Z4 35i +30% Peak HP & +38% Peak TQ
535i 535xi - +19.2% Peak HP & +30.5% Peak TQ

This item fits the following BMWs with N54 turbo engines:
2008-2010 E82 BMW 135i
2011+ E82 BMW 1M Coupe
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2012 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 335i 335is Convertible
2007-2010 E60 BMW 535i 535xi 535i xDrive
2009+ Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Cobb Tuning AccessPort V3 - 135i 335i (N55 Engine 2011)

For BMWs with a model year up to 2011 only, will not work with 2012+ models

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
CARB certified for sale in all 50 states

T#:183979

Part#: AP3-BMW-002

EO#: D-660-7

In Stock

$ 715.00 USD

Add to Wish List

Qty

$ 715.00 USD

Add to Wish List

THE EASIEST WAY TO 55+ HP WITH THE N55
HP gain = 55+ hp
Trq gain = 78+ ft-lbs
Plug-In Power! Easy to use and completely reversible!

New Features
Larger, full color, higher resolution screen
We super sized the screen for ease of use and better monitoring. Full text help menus, multi-gauge layouts, full map descriptions and more. This screen has room to spare - so no need to run back to your laptop.

Customizable multi-gauge display
Want gauges? No problem. The V3 now supports up to 6 fully customizable gauges with 1/1000 resolution. Monitor all the parameters you want to see and customize each layout for street, strip or track.

In vehicle mount, with on/off switch
There is nothing we like more to see than an AP peeking over the dash. With the on/off button and using the included universal mount or vehicle specific options, there is no reason not to run your AP in-vehicle.

Faster and easier to use with a familiar face
We listened to what you wanted. Use your same maps, monitor your same parameters, and troubleshoot your same codes, but now with more. More speed, more memory, more map storage, more live gauges, and more troubleshooting help.

Interchangeable faceplates
Is it your Accessport or our Accessport? It's yours. Customize it as you see fit. The new V3 comes with 2 interchangeable bezels, blue and grey, or put your own touches on one.

The Cobb Tuning AccessPort is a flashing tool that installs performance software through the OBD port on your car. No other software is as easy to use and install! If you can program a TV remote, you're over-qualified to install this software. Just plug the AccessPort into the OBDII port under the dash, bring up the AccessPort onscreen menu, select from a variety of engine maps for your desired performance and install. It's that easy. The software is from COBB Tuning - one of the most accomplished software tuners in the business. The Cobb software replaces the conservative factory settings with different maps to make more power. But it's more than just a way of loading performance software... The AccessPort also functions as a data logger and fault code reader . It's a multi-function tool that you will never get tired of picking up and checking out.

Data

Since it plugs into the car's OBD communication port it has unparalleled access to a stream of engine data. It reads and displays throttle position, boost, ignition advance, wastegate duty cycle, mass air flow, intake air temperature, air/fuel ratio, calculated load, and much more. You can also record data for later analysis - up to 10 hours of running data! It also works as a timing meter for 0-60, 1/8 mile, 60' acceleration, 330' acceleration, and 1,000' acceleration time. You can plug the AccessPort into a PC or Mac and view all of this saved data in their program. This information is invaluable for evaluating engine performance and performance modifications.

Diagnostics

With access to the OBD port, the Cobb tuner can also read and reset Diagnostic Trouble Codes (DTCs). This saves you a trip to the dealer or local shop simply to have a fault code interpreted. Now you can pull these codes and get an answer to the problem right away! The code number and a brief description of the code is given so you won't even have to search for it online. Reset the code and you're on your way (unless the code comes back...).

Power

The AccessPort comes pre-loaded with 4 tuning files - Stage 0 (stock), Stage 1 Sport (91 octane), Stage 1 Aggressive (93 octane), and a Valet file. Additional files are available from the Cobb website for things such as an intake and larger intercooler. It can hold up to 100 different tuning files! It also saves your stock original file so you can revert back to stock at any time. The AccessPort maintains the sophisticated control logic, refined engine response and excellent driveability of the stock BMW computer while providing impressive power gains and improved performance. Cobb engineers are constantly revising and tuning their files to extract the most horsepower with the least effect on reliability and drivability. Updated files and new maps for additional modifications are available direct from Cobb.

Typical Power Gains:

Car	Peak Power Gain 91 octane	Peak Power Gain 93 octane
135i/335i/335xi N55	+32hp (+10%) +42ft-lbs (+14%)	+56hp (+18%) +78ft-lbs (+26%)

Additional Resources

Tutorial Videos:

Simple Installation
Firmware Update
Change Map
Performance

Live Data
Data Logging
Trouble Codes
Uninstall

This item fits the following BMWs with the N55 single-turbo engine:
2011 E82 BMW 135i 135is
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011 E92 BMW 335i 335xi 335i xDrive - Coupe
2011 E93 BMW 335i - Convertible

Show More Show Less

Burger Motorsports JB4 Tuner - Type A Harness - E82 E88 E90 E92 E93 N...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:402617

Part#: JB4-N55-A

In Stock

$ 559.00 USD

Add to Wish List

Qty

$ 559.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! Fits the Following BMWs: E82 E88 E90 E92 E93 - N55 3.0 liter - With harness type A, 2011 - early 2012 build dates

Show More Show Less

BMW N54 JB4 2 Step / NLS Relay

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1762259

Part#: JB4N542STEP

Ships in 1 Business Day

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMW N54 JB4 2 Step / NLS Relay is a powerful add-on for BMW N54 engines that enables your JB4 to “2-step” by cycling power to the ignition coils, allowing for quick boost build-up even when the engine is not under load. Ideal for both manual and automatic transmissions, this relay is perfect for creating dramatic sound effects and for launching with manual transmissions. Additionally, it provides No Lift Shifting (NLS) capability for manual cars, enhancing performance and shifting speed.

Enables 2-step functionality for boost control, enhancing launch performance
No Lift Shifting (NLS) for seamless gear changes in manual transmissions
Compatible with both manual and automatic BMW N54 models
Easy installation with updated JB4 firmware (v32_15 for twin turbo or v13_7 for single turbo) - clutch wire no longer required
Requires JB4, back-end flash map, and either a BMS data cable or JB4 mobile connect kit

Show More Show Less

JB4 Anti Lag Full Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:553176

Part#: JB4ANTILAG

Ships in 2 Business Days

$ 50.00 USD

Add to Wish List

Qty

$ 50.00 USD

Add to Wish List

Includes a programmed chip and wiring harness to allow on-the-fly anti-lag. Select a gear, hold down the volume button, floor the car, and once boost has built up release the volume button to instantly take off under full boost. Absolute must-have for rolling races of any transmission type and works well for automatics off the line too. Requires a BMS back end flash map and ethanol fuel is strongly suggested.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Chips & Software for BMW 1 Series

Sub-Categories

BMS Pedal Tuner - N52, N54, N55

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

BMS Pedal Tuner - N52, N54, N55 (Manual Transmission)

Burger Motorsports JB4 Tuner - N54

Burger Motorsports JB4 Tuner - Type B Harness - E82 E88 E90 E92 E93 N...

Cobb Tuning AccessPort V3 - 135i 1M 335i 535i Z4 35i/is (N54 Engine 2...

Cobb Tuning AccessPort V3 - 135i 335i (N55 Engine 2011)

Burger Motorsports JB4 Tuner - Type A Harness - E82 E88 E90 E92 E93 N...

BMW N54 JB4 2 Step / NLS Relay

JB4 Anti Lag Full Kit

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results