BMW Tools & Specialty Equipment for BMW 1 Series

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

WHEEL STORAGE RACK:

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

TIRE STACK COVER:

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

• Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
• Durable 150D coated material is rated for outdoor use.
• Cover is a large 32" wide X 46" tall.
• Fitted with a long 29" zipper up the side for easy installation and removal.
• Nylon draw string at the bottom allows for a good snug fit.
• Includes a handy storage pouch if not in use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

• Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
• Prevents damage to rocker panels or vehicle undercarriage
• Made from solid billet aluminum for durability
• Engraved Burger Motorsports logo for authenticity
• Honeycomb grip pattern for stability during use

If you are doing a clutch install, you will need an alignment tool. This alignment tool is a genuine BMW tool, and will help you get the job done.

Genuine BMW BUSH

• Fits all N54 

The Universal 40 Piece Metric Socket Set includes all of the necessary tools to create a socket set by purchasing only one ratchet. The included 3/8-inch drive flex head ratchet and two female 3/8-inch drive adapters will allow you to use 3 different drive sizes of sockets: 1/4", 3/8", and 1/2"! Use this kit to help complete your tool kit until you decide to purchase more ratchet sizes, and when you do, you don't have to get rid of any of these tools to do so, which is possible with the adapters.

And of course, this kit is included in our LIFETIME REPLACEMENT program!

Includes:

• 4 mm (1/4" Drive)
• 4.5 mm (1/4" Drive)
• 5 mm (1/4" Drive)
• 5.5 mm (1/4" Drive)
• 6 mm (1/4" Drive)
• 7 mm (1/4" Drive)
• 8 mm (1/4" Drive and 3/8" Drive)
• 9 mm (1/4" Drive and 3/8" Drive)
• 10 mm (1/4" Drive, 3/8" Drive, and 1/2" Drive)
• 11 mm (1/4" Drive and 3/8" Drive)
• 12 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 13 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 14 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 15mm (3/8" Drive and 1/2" Drive)
• 16mm (3/8" Drive and 1/2" Drive)
• 17mm (3/8" Drive and 1/2" Drive)
• 18mm (3/8" Drive and 1/2" Drive)
• 19mm (3/8" Drive and 1/2" Drive)
• 21mm (1/2" Drive)
• 22mm (1/2" Drive)
• 24mm (1/2" Drive)

3/8" DRIVE LONG FLEX HEAD RATCHET:

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

• Special designed 72T gear mechanism
• 5 degree of handle movement between gears 
• Flex head has 7 detent positions in a 180 degree swing
• Push button release holds socket tight until you are ready to release
• Ratchet is a full 290mm ( 11") long for extra leverage.

3/8" DRIVE 6 POINT SOCKET SET:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm

LIFETIME REPLACEMENT on all items in this kit!

LOW PROFILE JACK:

Meet the Schwaben Long Low Profile - High Lift Floor Jack: A Must-Have for BMW and MINI Enthusiasts.

Experience unmatched lifting efficiency with the Schwaben Long Low Profile - High Lift Floor Jack. Engineered with BMW and MINI enthusiasts in mind, this jack boasts a unique blend of features tailored to your beloved vehicles.

Key Features:

• Swift Reach: Innovative One Pump feature ensures quick contact with most cars.
• Versatile Reach: Ultra-long arm accommodates lowered cars and high vehicles like trucks and SUVs.
• Safety Assured: Overload system prevents usage beyond its rated capacity, enhancing security.
• Precision Control: Universal joint on the handle offers precise load management.
• Seamless Positioning: Swivel saddle and rear casters enable easy jack placement.
• Vehicle Care: Soft foam sleeve on the handle safeguards your vehicle's finish.
• Protective Padding: Rubber saddle pad shields your car during lifting.
• Added Convenience: Equipped with a tool tray on the jack for lug nuts and tools.
• LIFETIME REPLACEMENT: If this jack is injured in the line of duty, it will be backed by our lifetime replacement policy!

Specifications:

• Minimum Height: 2-3/4"
• Maximum Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Distance to Jack Pad Center from Pivot Point: 22"
• Front Caster Dimensions: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Max Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

DRAIN PAN:

Features:

• Use it for oils or coolant
• Only 125mm high!
• Rolls on 4 casters for ease of use

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

PADDED CREEPER:

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 Features:

• Thick fully padded leatherette cover.
• 40" long with heavy-duty metal support frame.
• 1"" steel tube frame.
• Four position adjustable headrest.
•  Six 2 1/2"oil-resistant rollers.
• Powder coated frame to resist rusting.
• Overall dimensions: 17" x 40" X 4"
• Ground clearance: 1-1/2"
• Ball bearing swivels on wheels.
• 250lb capacity.

PADDED CREEPER SEAT:

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

3/8-INCH DRIVE LONG FLEX HEAD RATCHET:

This professional quality flex ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 7 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. Ratchet is a full 290mm ( 11") long for extra leverage.

Part of our LIFETIME REPLACEMENT PROGRAM

1/2-INCH DRIVE LONG FLEX HEAD RATCHET:

This 1/2" drive flex head ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 9 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. 

Part of our LIFETIME REPLACEMENT program