BMW Engine Parts for BMW 1 Series

MAHLE PowerPak Piston Kit 84mm with Thermal Barrier Coating (TBC) - N...

T#:2928971

Part#: 197832209T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Phosphate + Grafal + Hard Anodized top ring groove + TBC Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston. MAHLE forged pistons more tolerant to the abuses of extreme heat, detonation and pressure inherent in performance oriented engines.

Show More Show Less

N54/N55 Wireless Ethanol Analyzer Kit - HPFP To Tank Upgraded Fuel Li...

T#:18534631

Part#: SP-U-EA-S-2-L

Special Order: No Guaranteed ETA

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

The Spool wireless Ethanol Analyzer kit is a very cost-effective and robust ethanol content and fuel temperature monitoring solution. With the included smartphone app, the analyzer paired with a GM ethanol sensor can display the in-tank fuel's ethanol concentration percentage and fuel temperatures in Fahrenheit. The Analyzer module incorporates the latest Bluetooth 4.0 low energy protocol which means very little battery usage on your smartphone and also leaves regular Bluetooth functions and connectivity on your smartphone untouched. Why do you need an Ethanol Analyzer solution? According to the latest ASTM guidelines, Ethanol blends rated E85 can have anywhere from 51% to 85% ethanol content. This means the E85 at your pump can in fact at times, be only E55 containing 55% ethanol. This uncertainty is of serious concern to enthusiasts who are running performance E85 tunes for their vehicles. Running a lower ethanol content fuel with a tune rated for a higher content can cause damage to your motor. Knowing the absolute ethanol content in the E85 fuel from your pumps helps you avoid those damages. Ethanol Sensor App Unlike competitors, our Ethanol Analyzer Apps are truly free of cost and features an Ethanol Mix calculator to make sure you get the perfect blend every time. With an ethanol analyzer kit, the App can automatically populate the in-tank fuel's E-content required for the calculations. The app can be downloaded and used even if you do not have our Analyzer kit and will let you estimate your mixes. Upgraded Fuel Lines The Ethanol analyzer kit comes with 6AN upgraded PTFE core Black Nylon Coated Braided stainless steel lines that are fully Ethanol compatible and Burst rated to extreme pressures.

Show More Show Less

Spool Performance N54 Stage 3 Bucketless LPFP

T#:640947

Part#: SP-BM54FP-S3

Special Order: No Guaranteed ETA

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Stage 3 LPFP upgrade kit for your N54 engine

Cat Cams N54 Hot Street Camshaft Set

T#:25805752

Part#: 1305002

Special Order: No Guaranteed ETA

$ 1,950.00 USD

Add to Wish List

Qty

$ 1,950.00 USD

Add to Wish List

Upgrade your N54 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their Hot Street cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! The VANOS (VVT) system on the intake camshaft changes the PD from 125° to 70°. The data are shown for full intake retard (disengaged VVT).The VANOS (VVT) system on the exhaust camshaft changes the PD from 130° to 85°. The data are shown for full exhaust advance (disengaged VVT). Tuning advised!

Show More Show Less

Cat Cams N54 Race Camshaft Set

T#:25805753

Part#: 1305003

Special Order: No Guaranteed ETA

$ 1,950.00 USD

Add to Wish List

Qty

$ 1,950.00 USD

Add to Wish List

Upgrade your N54 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their race cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! The VANOS (VVT) system on the intake camshaft changes the PD from 125° to 70°. The data are shown for full intake retard (disengaged VVT). The VANOS (VVT) system on the exhaust camshaft changes the PD from 130° to 85°. The data are shown for full exhaust advance (disengaged VVT). Tuning Required!

Show More Show Less

Schrick - N52 Performance Camshaft Set - 238/272

T#:26904914

Part#: SCH-N52-238/272

Special Order: No Guaranteed ETA

$ 1,749.99 USD

Add to Wish List

Qty

$ 1,749.99 USD

Add to Wish List

MAHLE Forged Piston Kit 84mm with Thermal Barrier Coating (TBC) - N54...

T#:2928969

Part#: 197841309T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Inline 6 RACE Series Bearing Shells - Set

T#:637190

Part#: 6B1584H-.025

Special Order: No Guaranteed ETA

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

Upgraded Bearing Shells for you N55/N54/S55B30!

Mahle Valve Cover - BMW N54 3.0L

T#:48298040

Part#: 11127565284

Special Order: No Guaranteed ETA

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Complete valve cover assembly with gasket, bolts, and integral cyclone separator

Alternator Pulley

10X Entries Into Our F80 M3 Sweepstakes

T#:52164889

Part#: 12317560483

In Stock

Sale - Save 15% $ 45.99

This product was last offered at the strikethrough price on
09-16-2026

$ 39.09 USD

Add to Wish List

Qty

Sale - Save 15%

$ 45.99

This product was last offered at the strikethrough price on
09-16-2026

$ 39.09 USD

Add to Wish List

Is your BMW making a chirping or grinding noise at idle? The culprit is frequently a failing alternator decoupler pulley. Unlike a traditional solid pulley, this Overrunning Alternator Pulley (OAP) allows the alternator rotor to "freewheel" when engine speeds drop suddenly. This specialized function protects your BMW drive belt and belt tensioner from excessive snap-back, vibration, and "belt slap."

Prevent Catastrophic Engine Failure

Over time, the internal clutch mechanism can seize or slip, leading to accelerated wear or total serpentine belt failure. On BMW engines, a snapped belt can be ingested through the front main seal, causing catastrophic engine damage. Replacing this pulley is a cost-effective preventative maintenance step that restores smoothness to your accessory drive without the high cost of a complete alternator replacement.

Features & Benefits:

Lowers the load on the drive belt, tensioner, and AC compressor.
Stops "belt slap" and rhythmic chirping noises during deceleration and idle.
Direct Replacement with high-quality construction ensures perfect fitment and long-term durability.
Essential Maintenance for N52 engines

Show More Show Less

IRP Isolated Aluminum Engine Mounts - E9X, E8X (non-M)

T#:2423579

Part#: IRPEM-9XAL

Special Order: No Guaranteed ETA

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Direct replacement performance mounts. Features: CNC machined lightweight high quality anodized aluminum Replaces OE: 22116760330; 22116773744 Includes: 2 pcs. aluminum engine mounts

FTP Thermostat cover kit - N54 3.0L

T#:582056

Part#: SG84006-CT

Special Order: No Guaranteed ETA

$ 50.00 USD

Add to Wish List

Qty

$ 50.00 USD

Add to Wish List

This plate is a simple way to add a bespoke look to your engine bay. If you have replaced your oil thermostat or deleted your cooler, now is the perfect time for this mod. Installs in minutes and ensures a positive seal for the oiling system.

Show More Show Less

FTP Motorsport Boost Fitting - N20/N55

T#:582217

Part#: SG80036

Special Order: No Guaranteed ETA

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

If you are planning on running additional boost, keeping tabs on the level is going to be an important factor. For doing this you have many options...Apps, scanners, coding. But what about a good old mechanical gauge? Now you can add one the easy way with this sandwich plate adapter from FTP. Simply remove the factory boost sensor install the plate, re-bolt the boost sensor and you're done.

Show More Show Less

Bremmen Oil Cooler - BMW N52 N20 N55

10X Entries Into Our F80 M3 Sweepstakes

T#:4455968

Part#: 11427525333

Ships on Apr 12, 2027

Sale - Save 15% $ 39.99

This product was last offered at the strikethrough price on
09-16-2026

$ 33.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 39.99

This product was last offered at the strikethrough price on
09-16-2026

$ 33.99 USD

Add to Wish List

Also referred to as a heat exchanger, this radiator type component keeps your oil temps low.

MMX Oil Thermostat Dress-Up Caps - Black

T#:5269482

Part#: MMR03-0502BL

Special Order: No Guaranteed ETA

$ 136.99 USD

Add to Wish List

Qty

$ 136.99 USD

Add to Wish List

This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

MMX Oil Pressure Gauge Adaptor - Dark Anthracite

T#:4552049

Part#: MMR03-0502-KP

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.

Show More Show Less

Febi Oil Pan Gasket

We Price Match - Give Us A Call or Chat!

T#:16375133

Part#: 11137600482

Ships on Feb 2, 2027

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

Replace your worn out and leaking oil pan gasket and avoid having to top off between oil changes.

N54 Rear Crankshaft Seal Kit W/ Primer And Sealant

T#:24876316

Part#: 11117584398KT

In Stock

$ 126.99

This product was last offered at the strikethrough price on
08-07-2026

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

The rear main seal or crankshaft seal is one of the most difficult to replace. However, they often fail. When your rear main does fail, your car will be marking it's territory with little oil drops wherever you park. Replace yours and keep your oil in your engine with BMW's engine Primer and sealant to complete the job!

Show More Show Less

Valve Cover Gasket - Set

10X Entries Into Our F80 M3 Sweepstakes

T#:54068660

Part#: 11127587804

In Stock

Sale - Save 15% $ 26.99

This product was last offered at the strikethrough price on
09-16-2026

$ 22.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 26.99

This product was last offered at the strikethrough price on
09-16-2026

$ 22.94 USD

Add to Wish List

Crankshaft

10X Entries Into Our F80 M3 Sweepstakes

T#:38924612

Part#: 11217580483

Special Order: No Guaranteed ETA

$ 1,591.76 USD

Add to Wish List

Qty

$ 1,591.76 USD

Add to Wish List

Direct replacement N55 crankshaft for a fraction of the cost of Genuine

Rear Bank 2 Post-Cat Oxygen Sensor - 490mm - E70 E83 E82/88 E9X (N5X ...

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:4934915

Part#: 3148030031

Ships on Nov 25, 2026

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. This oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 490mm bank 2 oxygen sensor is mounted after the catalytic converter.

Show More Show Less

Meyle - Oxygen Sensor - Bank 2, Pre-Cat - E82, E88, E9x, Z4 ...

5X Entries Into Our F80 M3 Sweepstakes

T#:40512028

Part#: 11787558087

Ships on Nov 25, 2026

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

Backed by Meyle’s high manufacturing standards for durability and reliability

OEM Pierburg Valvetronic Camshaft Adjusting Unit - BMW N52 3.0L ...

T#:26538310

Part#: 11377548388

Special Order: No Guaranteed ETA

$ 333.99 USD

Add to Wish List

Qty

$ 333.99 USD

Add to Wish List

This Valvetronic variable valve timing actuator works by adjusting the eccentric shaft, increasing or decreasing valve lift and duration for optimal performance. If your actuator has failed, you will notice a significant power and performance decrease and an engine service light illuminated on the dash. Replace your with this OEM Pierburg replacement to restore performance and get your BMW back on the road! Features: Guaranteed fitment High-strength materials withstand engine heat and vibration Manufactured to OE dimensions for proper clearances and alignment Matches OE specifications for proper timing at all engine speeds

Show More Show Less

OEM Kolbenschmidt Adjustment Unit - Inlet Camshaft - BMW N52 N55 S55 ...

T#:31092509

Part#: 11367583207

Special Order: No Guaranteed ETA

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

This timing chain camshaft gear is the thicker gear located toward the front of the engine on the end of the intake camshaft. This is sometimes changed when replacing the timing chain. BMW # 11367578877 may also be required when servicing this part.

Show More Show Less

OEM Kolbenschmidt Adjustment Unit - Exhaust Camshaft - BMW N52 N55 S5...

T#:31092510

Part#: 11367583208

Special Order: No Guaranteed ETA

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

This timing chain camshaft gear is the thicker gear located toward the front of the engine on the end of the exhaust camshaft. This is sometimes changed when replacing the timing chain. BMW # 11367578877 may also be required when servicing this part.

Show More Show Less

BMW N54 N55 Heat Exchanger - 17217536929

For vehicles with automatic transmission

10X Entries Into Our F80 M3 Sweepstakes

T#:8677204

Part#: 17217536929

Special Order: No Guaranteed ETA

$ 109.28 USD

Add to Wish List

Qty

$ 109.28 USD

Add to Wish List

BMW N54 N55 Heat Exchanger - 17217536929 is designed to maintain optimal transmission oil temperatures, ensuring reliable performance and longevity for your BMW. This high-quality heat exchanger effectively manages heat, preventing overheating and potential damage to the transmission system.

Optimal Temperature Control: Keeps transmission oil at a safe temperature, enhancing overall performance.
Durable Construction: Built to withstand high temperatures and demanding driving conditions.
Improved Reliability: Helps prevent transmission overheating, which can lead to costly repairs.
Direct Replacement: Engineered to fit seamlessly with BMW N54 and N55 engines.

Turner Motorsport's BMW N54 N55 Heat Exchanger - 17217536929 is an essential component for maintaining the efficiency and durability of your transmission system.

Show More Show Less

Bav Auto Crankshaft Position Sensor - Multiple BMWs

10X Entries Into Our F80 M3 Sweepstakes

T#:639826

Part#: 13627525015

Special Order: No Guaranteed ETA

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

This crankshaft position sensor provides the ECU with the engine speed signal. It is mounted in either the engine block or the bell housing of the transmission on most cars. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Valve Cover Gasket Set

T#:15478721

Part#: 11127587804

In Stock

$ 28.99

This product was last offered at the strikethrough price on
10-13-2026

$ 25.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 28.99

This product was last offered at the strikethrough price on
10-13-2026

$ 25.99 USD

Limited Qty Sale

Add to Wish List

A leaky valve cover gasket makes a mess of your engine, your garage, and allows the life-blood of your engine to escape. Replace leaky valve cover gaskets and always start with a fresh gasket after valve cover removal. Trouble trying to track down your leak? The easiest way to do so is by cleaning your engine, then examining for leaks.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series ...

T#:403273

Part#: FILPFPK2

Back Ordered

Starting at $ 684.84 USD

Add to Wish List

Starting at $ 684.84 USD

Add to Wish List

*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping

Show More Show Less

HARD Motorsport BMW Oil Cooler Fitting Adapter Plate - E36 E46 E82 E9...

T#:593621

Part#: OILADPTR

Special Order: No Guaranteed ETA

$ 62.00 USD

Add to Wish List

Qty

$ 62.00 USD

Add to Wish List

The HARD Motorsport Oil Cooler Fitting Adaptor Plate allows you to upgrade your oil cooler lines to a flexible braided hose that can be routed in any direction, giving the ability to upgrade or relocate your oil cooler. This kit replaces the oil cooler hard lines with two -10 AN fittings, mounting bracket, O-rings, and adaptor bracket, which is CNC machined stainless steel.

Show More Show Less

Hitachi Fuel Pump Camshaft Follower - BMW N20 N55 S55 N63 S63 B48/46 ...

T#:589968

Part#: 11327601233

Back Ordered

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

A faulty camshaft follower can damage the engine and cause incorrect valve timing.

N54 High Pressure Fuel Pump Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:401622

Part#: 13517616446RKT1

In Stock

$ 1,808.99

This product was last offered at the strikethrough price on
06-19-2026

$ 1,807.99 USD

Add to Wish List

Qty

$ 1,807.99 USD

Add to Wish List

N54 HPFP failure is common with BMWs that use this powerplant. Our Packaged by Turner N54 High Pressure Fuel Pump Replacement Kit includes everything you need to replace your N54 HPFP.

Kit includes:

Genuine BMW Re-manufactured High pressure fuel pump
Intake manifold gasket sets
Throttle body gasket
Low pressure fuel sensor
High pressure fuel sensor

Show More Show Less

Timing Chain Kit - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:640375

Part#: 113175840841KT1

In Stock

Sale - Save 2% $ 716.10

This product was last offered at the strikethrough price on
10-19-2026

$ 698.90 USD

Add to Wish List

Qty

Sale - Save 2%

$ 716.10

This product was last offered at the strikethrough price on
10-19-2026

$ 698.90 USD

Add to Wish List

The N55 in your BMW is an interference engine, meaning that if the timing chain were to fail your engine would suffer catastrophic damage due to valvetrain components colliding with each other. Over time the timing chain will start to wear and stretch, potentially causing it to skip timing or just completely fail. Also, the timing tensioners themselves could fail! Early symptoms of timing chain wear include front end noise not associated with VANOS, or slapping noises coming from the timing cover. Turner Motorsport has assembled a complete kit that includes everything necessary, as well as small hardware, to completely service the timing on your N55. Tools needed to do the job can be found on our site as well.

Show More Show Less

PFS N54 Dual Bucketless Fuel Pump Upgrade - External Series - PFS-E9X...

T#:590122

Part#: PFS-E9X-BCKTLSSE

Back Ordered

$ 609.99 USD

Add to Wish List

Qty

$ 609.99 USD

Add to Wish List

Looking to make 700WHP+ on your N54 powered vehicle, need the fuel to do to so, and don’t want to spend a ton of money? Look no further than the PFS bucketless fuel “External Series” pump upgrade! The external series takes our already best on the market bucketless design and adds a 3/8 Quick Disconnect bulkhead fitting to the top hat which allows you to run the secondary pump independent of the factory lines. This allows FULL FLOW from the second pump unhindered by the factory jet pump, siphon, fuel filter, or Fuel pressure regulator. All PFS “External Series” Bucketless pumps include the following: A complete plug and play solution by simply getting rid of your factory bucket Two New E85 compatible Walbro 450 F9000274 pumps Two new Walbro filters (Hydra-Mat available in options) Wiring Harness for the secondary pump with Fused power Hobbs Switch Fuel pump relay 3/8 QD fitting on the Passenger side top hat -6 Fuel line from Passenger side tank to the front of the vehicle -6 Fuel line from Driver side tank to the front of the vehicle PFS 10 micron filter with choice of outlet fittings Flow testing on the PFS test bench prior to shipping

Show More Show Less

N55 N54 Low Oil Temp Thermostat Parts - Type 07

T#:594822

Part#: SG84006-07

Special Order: No Guaranteed ETA

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

Genuine BMW Charcoal Canister Hose - E82 1 M Coupe

T#:178256

Part#: 16137845193

Back Ordered

6% off MSRP $ 204.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.99 USD

Add to Wish List

Qty

6% off MSRP

$ 204.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.99 USD

Add to Wish List

Genuine BMW Vent Pipe
This item fits the following BMW Chassis:
E82 1M Coupe,E82

Fits BMW Engines including:
N54T

Rein N54 Upgraded Aluminum Power Steering Pump Pulley - PKP0246 - E9x...

2X Entries Into Our F80 M3 Sweepstakes

T#:45997481

Part#: PKP0246

Ships in 3 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Plastic power steering pump pulleys can wear over time or even crack. If you are replacing your pump or if your pulley has worn or failed, upgrade to this aluminum pulley from OEM Rein.

Pneumatic Boost Solenoid - N20 N55 N63 S63 Engines

2X Entries Into Our F80 M3 Sweepstakes

T#:6166479

Part#: 11747626351

Ships in 1 Business Day

$ 99.99

This product was last offered at the strikethrough price on
06-30-2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Optimize the performance of your BMW's N20, N55, N63, or S63 engine with the Pneumatic Boost Solenoid. This essential actuator plays a crucial role in regulating vacuum, influencing the overall performance of your vehicle. Ensure your BMW operates at its best by addressing faulty boost solenoids promptly.

Engine Performance Optimization: The boost solenoid enhances the overall performance of N20, N55, N63, and S63 engines.
Vacuum Regulation: Precisely regulates vacuum levels, contributing to efficient engine operation.
Compatibility: Designed for BMW vehicles with N20, N55, N63, and S63 engines for a perfect fit.
Fault Resolution: Promptly addressing faulty boost solenoids ensures consistent and reliable vehicle performance.

Upgrade your BMW's engine performance with the Pneumatic Boost Solenoid, designed to deliver optimal functionality for N20, N55, N63, and S63 engines.

Show More Show Less

ECS Tuning N54 PCV Valve Upgraded - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:4154602

Part#: 090745ECS09

Special Order: No Guaranteed ETA

Sale - Save 25% $ 105.99

This product was last offered at the strikethrough price on
06-14-2026

$ 79.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 105.99

This product was last offered at the strikethrough price on
06-14-2026

$ 79.49 USD

Add to Wish List

The OEM plastic Positive Crankcase Ventilation (PCV) valve does not hold pressure well, even when brand new. This means that when you are in boost conditions, the highly pressurized PCV valve leaks charged air back into the crankcase. Depending on the condition of your PCV valve, this can range from irritating to dangerous. Additionally, if your valve cover is cracked, loose, or has a bad gasket, you are likely experiencing a pressure leak either internally or externally, as well as potential oil loss issues. ECS Tuning now offers a solid aluminum PCV valve upgrade designed to address these issues by preventing leaks and outlasting the standard BMW-designed PCV! The internal components of this aluminum PCV valve fit tighter than the OE design and can withstand significantly more abuse, perfect for high mileage N54s, N54s that have been tuned, or N54s with upgraded turbos (larger twin or big single turbo builds). This may not be your last PCV Valve, but it will certainly outlast both the Genuine BMW and other common aftermarket alternatives!

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

For use with converted single turbo N54 engines

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Precision Raceworks High Performance Ignition Kit - Blue Coils - Stoc...

T#:1165722

Part#: 601-0020

Back Ordered

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Rid your BMW's N54 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N54 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power output. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored and lost power regained, often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies!

Show More Show Less

FTP Motorsport PCV Valve Upgraded Replacement - N54

T#:583063

Part#: SG84036

Special Order: No Guaranteed ETA

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

The OEM plastic PCV valve does not hold pressure well even when brand new. What this means is that when the turbochargers are making boost, pressurized air can become forced backwards through the valve and back into the crankcase. Depending on the condition of your PCV valve this can range from irritating to dangerous as a pressurized case can cause all sorts of issues. Additionally, if your valve cover is cracked due to age or has a bad gasket you are more than likely experiencing a pressure leak either internally or externally. These two features can cause even a low-mileage N54 to run like a tired elephant, sometimes even unlocking a special bonus function known as "Limp Mode". The solution is to replace any failed components and upgrade the PCV valve to something more capable withstanding the abuse of a turbocharged environment. FTP Motorsport has you covered with this solid aluminum valve assembly. It is essentially the same thing that came in your car from the factory, made out of aluminum. The internal components have also been made to fit tighter and outlast the life of an off the shelf replacement. No, this won't be the very last PCV valve you buy, but it will most certainly alleviate a lot of headaches common to N54 owners. And if you're tuned, big twin or single swapped you need one of these yesterday.

Show More Show Less

BMW N54 3.0L MAHLE Forged Piston Kit 84mm

T#:2928968

Part#: 197841309

Ships in 2 Business Days

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84mm delivers superior performance and reliability for your BMW engine build. This high-quality piston kit replaces the factory cast aluminum pistons with robust forged pistons, offering enhanced durability and heat resistance. Designed to withstand the stresses of extreme temperatures, detonation, and high pressure, these pistons are ideal for high-performance applications. MAHLE Motorsport’s PowerPak Piston Kit ensures a significant upgrade in strength and reliability, making it perfect for both motorsport enthusiasts and those seeking to enhance their daily driving experience.

Enhanced Durability: Forged pistons provide superior strength and are more resistant to extreme heat, detonation, and high pressure compared to cast aluminum.
Precision Engineering: Made from high-quality 2618 alloy, ensuring reliability under demanding conditions.
Complete Kit: Includes pistons, pins, clips, and rings for a comprehensive upgrade.
Optimized Performance: Designed for high-performance applications, improving engine efficiency and power output.
Advanced Coatings: Features phosphate, Grafal, and hard anodized top ring groove coatings for extended longevity and performance.

Specifications:

Compression Ratio: 9.5:1
Bore: 84.00mm
Stroke: 89.6mm
Rod: 145.05mm
CH: 31.7mm
Piston Style: Dish, with 4 valve reliefs
Crown Volume: 17.2cc
Piston Mass: 314g
Piston Material: Forged, 2618
Pin Diameter: 22mm
Pin Style: Floating
Pins Included: Yes
Clip Style: Round Wire
Clips Included: Yes
Piston Ring Thickness: 1.0mm, 1.2mm, 2.8mm
Rings Included: Yes
Sold As: Set of 6
Coatings: Phosphate, Grafal, Hard Anodized top ring groove

Show More Show Less

Febi N54 Fuel Supply Unit With Fuel Level Sender Unit - 16147163296 -...

T#:56580208

Part#: 16147163296

Back Ordered

$ 105.99 USD

Add to Wish List

Qty

$ 105.99 USD

Add to Wish List

The Febi Bilstein fuel sender unit provides a reliable & affordable solution for your BMW's fuel system.

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

2X Entries Into Our F80 M3 Sweepstakes

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Vacuum Control Valve - E36 E39 E46 E53 E65 E66 E70 E83 E90

2X Entries Into Our F80 M3 Sweepstakes

T#:24179138

Part#: 11747810831

Ships in 1 Business Day

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Vacuum control valve used in emissions control systems.

Nissens Oil Cooler - Multiple BMWs

T#:380463

Part#: 11427525333

Ships in 6 Business Days

$ 118.99 USD

Add to Wish List

Qty

$ 118.99 USD

Add to Wish List

Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55

Show More Show Less

N55 Cometic Head Gasket - 0.052"

T#:31522946

Part#: C15476-052

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

MAHLE Forged Piston Kit 84.50mm - N54 - 3.0L

T#:2928976

Part#: 197841325

Ships in 2 Business Days

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Vulcan Cut-Ring Head gasket - N52 N54

T#:5216035

Part#: CR330074

Back Ordered

$ 285.99 USD

Add to Wish List

Qty

$ 285.99 USD

Add to Wish List

The Vulcan Cut-Ring head gasket is designed for use with high static compression or forced-induction engines which are prone to combustion pressure leaks when using typical composite or MLS head gaskets. The hybrid design offers the best properties of composite and steel head gaskets all with out needing added sealant or machining.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 1 Series

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results