Shifter Upgrades and Components for BMW 1 Series

New for your N54-powered 135 or 335 is our Dual Shear Selector Rod (DSSR) to deliver a more controlled and tighter shifting experience over the factory selector rod. Pair our N54 DSSR with our Double Adjustable Short Shifter for the full upgraded shifting experience. This DSSR is designed for BMW N54 models that have the selector rod p# 25117524722.

Upgrade from your single connection selector rod to a dual shear selector rod or DSSR for a stronger connection and an overall better shifting experience. The factory BMW selector rod is made of hollow aluminum tubing and attaches to both the shifter and transmission from one side utilizing a pin-and-clip design. The factory single-side attachment only has a small amount of surface area contacting both the shifter and transmission selector which relies directly on the connecting pin to do all of the shifting and control, this can cause a loose and/or lackluster experience when shifting gears or shaking your shifter in neutral. Your new Turner DSSR features a much larger contacting surface to both the shifter and transmission, not only does the upgraded DSSR have larger faces contacting your shift components but it also features double the amount of mounting surfaces. This dual shear selector rod hugs your shift lever and selector tight from both sides and eliminates deflection and sloppiness for the best shifting experience possible.

Features and benefits:

Provides an increased shift feel by reducing deflection and play in the linkage.
Works with factory and aftermarket Turner shifters
Manufactured from 303 stainless steel for superior corrosion resistance.
Includes zinc-plated hardware.
Design:

2-piece split design with captive pins
Replacement for 25117524722 (E8x/E9x N54 Cars)
Designed precisely to fit around the confines of the restrictive N54 carrier, clearing all critical fitment areas as you shift through the gears.
Installation:

Note the orientation of your factory selector rod upon removal
Once your factory selector rod is removed, attach the two-piece DSSR to the transmission selector joint and the lower shift lever. Once the two pieces are pressed together, move your shifter to either the 3rd or 5th gear position to give yourself maximum room to install and tighten the supplied hardware.
Product development:

Our shifter components are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

A full overhaul of your shift setup. Short shift upgrade featuring an exclusive N54 DSSR, poly carrier bushing and associated components to transform your driving experience.

The double-adjustable short shifter kit features both shift lever height and throw adjustment to dial in the exact shifter feel you are looking for. Paired with the N54 DSSR this kit features upgraded replacements for your entire shift assembly with a whole new shift carrier, bushings, lever, and selector rod. Did we mention this will work with any factory-style press on shift knob?

If you're aiming to install a short throw shifter setup or completely rejuvenate your shifting assembly, this comprehensive kit is your perfect solution. It leaves no aspect untouched, upgrading all components simultaneously, eliminating the need for troubleshooting later to address any play in your shifter. We've all experienced the frustration of piecemealing upgrades, only to find ourselves cobbling together the rest of the kit in a longer, more tedious process. With this kit, you can get it right the first time and avoid any disappointment.

Performance advantages:

Adjustable between a conservative short throw to an ultra-short throw
Ultra crisp shifter feel - quicker, more precise shifts
More engaging driving experience
Design:

CNC machined chromoly steel shift lever assembly with 304ss shifter ball
Nylatron bushings
6061 Bearing cup assembly with type 2 anodizing for an amazing look and corrosion reistance
Shift level is compatible with OE BMW and aftermarket shift knobs
Reduced deflection from the rigid DSSR
Kit Contents:

Shifter arm assembly - 25117545110
Shifter arm bushings - 25117528407
Bearing pins - (25117529078 and 25117529079)
Turner poly rear shifter arm bushing - (25111222015 and 25111222652)
Shift lever assembly - 25117555911
Shifter lever cap assembly
Short shift lever adapter
E8x/E9x DSSR - 25117524722

Upgrade the shifting precision and feel of your BMW with Turner Motorsport Powerflex Shifter Carrier Street Bushings - Oval. Made of 90A urethane, these bushings replace the stock rubber ones to prevent sloppy shifting. The stiff urethane reduces play without adding vibration. Easy to install when the carrier is out of the car, these bushings ensure improved performance. Here are the key benefits:

• Enhances shifting precision and feel
• Prevents sloppy shifting caused by failed rubber bushings
• Made of 90A urethane for durability and stiffness
• Easy installation when carrier is removed

Turner Motorsport BMW Shifter Revitalization Kit

Restore your BMW's shifter to its former precision with Turner Motorsport's top-notch replacement kit. Over time, most BMW shifters lose their original feel due to inferior rubber bushings. These bushings introduce excessive movement in the shift lever, resulting in a shifter that lacks precision.

Introducing Turner Motorsport's solution - a direct-fit, high-strength Teflon bushing. Meticulously crafted from pure Teflon rod, free from any impurities or fillers, these bushings promise extended durability. By eliminating side-to-side play in the shifter rod, they notably enhance the performance of even the stock shifter.

Kit Includes:

• 4 Teflon Bushing Inserts
• 2 Carrier Pins

Elevate your BMW's shifting experience with Turner Motorsport's precision-designed replacement kit.

BMW E36 E46 Powerflex Clutch Fork Pivot Pin - Street offers enhanced performance and reliability for BMW enthusiasts. Engineered by Powerflex, this clutch fork pivot pin is designed to improve the feel and response of the clutch system, providing a more direct and consistent engagement.

• Improved Performance: Upgrades the factory clutch fork pivot pin to deliver a more precise and responsive clutch operation.
• Enhanced Reliability: Built to withstand the demands of both daily driving and spirited driving, offering greater durability over OEM components.
• Quality Construction: Made from high-quality materials to ensure long-lasting performance and resistance to wear and tear.
• Direct Fit: Designed specifically for BMW E36 and E46 models, ensuring a perfect fit with no modifications required.
• Enhanced Driving Experience: Reduces clutch play and enhances engagement feel, contributing to a more engaging driving experience.

Installation Note: Designed for street use and compatible with standard clutch systems.

• 30% shorter shifts
• Counterbalanced for great shift feel
• Stainless steel & aluminum construction
• Rubber isolated for reduced NVH
• Maintains stock shift feel with uprated stock-type bushings

The Dinan short shifter provides shorter shift throws with a crisper and more precise feel than a stock shifter. Instead of retrofitting a stock BMW lever, with all of its deficiencies, Dinan has engineered this billet aluminum shifting system. Special features engineered into this unit include a two piece fully isolated stick assembly, exclusive integrated and dampened pivot cup with self lubricating pivot ball, counter balanced to reduce effort and exclusive polymer "Iglide" T-500 lower pivot bushings that are impervious to contamination. Featuring an adjustable pivot, which allows this shifter to fit both standard and M Series applications. All of this combined with a simple straightforward installation provides a professional level shifter. Provides a 30% throw reduction in E82 128i/135i, E9X 325i/328i/330i/335i, and E60 530i/545i/550i.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty.

The Powerflex BMW Shifter Carrier Arm Bushings - Oval (Pack of 2) are a premium upgrade for BMW enthusiasts seeking enhanced precision and reliability in their gear shifts. These bushings replace the OEM rubber bushings, which can degrade over time, leading to loose or vague shifting.

Product Highlights:

• Shape: Oval design, tailored for specific BMW models.
• Material: Crafted from durable polyurethane, offering superior performance over standard rubber bushings.
• Enhanced Shift Feel: Significantly reduces flex and movement in the shifter carrier arm, providing tighter and more responsive gear shifts.
• Longevity: Resistant to wear, oil, and extreme temperatures, ensuring long-lasting performance under all driving conditions.
• Direct Replacement: Simple installation as a direct fit for the factory bushings.
• Performance Benefits: Ideal for daily driving or track use, offering improved shift accuracy and reduced sloppiness.

This set of two bushings is a perfect upgrade for drivers looking for crisper, more controlled shifting in their BMW, making it an essential component for both performance and c

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

A sloppy shifter can make your driving experience miserable. Luckily these Genuine BMW shifter rebuild kits are available to restore the crisp feel of a brand new shifter. This kit includes all of the Genuine BMW components that normally wear down and cause issues such as the bushings, clips, and dowel pin.

See all of the included components below!

Revamp your BMW's shifting experience with the Turner Motorsport Double Adjustable Short Shift Kit, a solution to the historically long throw shifters. Turner's short shifters offer height and throw adjustability, allowing drivers to discover their ideal driving sweet spot.

Curious about the long shifter? Turner's rally lever extension, available separately, provides a Quick Change option, simplifying the transition between long and short levers. Whether for track, weekend adventures, or daily commuting, Turner's short shifter kit caters to diverse driving needs.

Installing this kit is a breeze compared to competitors, thanks to the custom bearing cup that enables easy installation from inside the car. Enjoy the benefits of adjustable throw, ultra-crisp shifter feel, and an engaging driving experience.

Key Features:

• Adjustable throw from conservative to ultra-short
• Ultra-crisp shifter feel for quicker, precise shifts
• Easy installation with custom bearing cup
• Quick Change option for rally lever extension
• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• CNC machined for durability and corrosion resistance

Upgrade further with the Turner Weighted Shift Knob - a 6-speed coin-designed knob that enhances the shifting experience with added weight, resulting in faster engagement and overall improved shifting.

Turner Weighted Shift Knob Features:

• Anodized billet aluminum core
• Durable Delrin outer construction
• Weighs 340g (11.99oz) for enhanced shift feel
• Anodized billet shift boot collar with Turner logo

For a comprehensive shifter makeover, pair the knob with Turner's short shift kits. The knob, carefully crafted from billet 6061-T6 aluminum, is CNC machined for precision fit and finish, anodized for durability, and designed for seamless compatibility with OE BMW shift knobs.