Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

• Designed for N55 engines
• Optimizes airflow for increased power
• Improves throttle response and fuel efficiency
• Protects engine from contaminants

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

Upgrade your BMW's air intake system with Turner Motorsport's Exact-Fit High Flow Dry Air Filter! This direct replacement for the factory air filter improves engine breathing, resulting in increased power throughout the power band and enhanced fuel economy. Key benefits include:

• Higher flow than stock paper filters
• Immediate increase in performance
• Reusable design saves money on filter replacements
• Dry filter design requires less maintenance
• Easy to clean with warm soapy water
• Only needs cleaning every 50,000 miles under normal highway driving conditions

Be sure to check out the full line of filter cleaning supplies Turner Motorsport has to offer!

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

• Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
• 2.3mm Inner Diameter: Designed to meet specific engine requirements.
• Black Color: Blends seamlessly with the engine components.
• 8-Foot Section: Provides flexibility to cut the hose to the required length.
• Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.

• High-quality silicone couplers and elbows for BMW projects
• Precision-engineered for reliability and performance
• Versatile solution for intercooler installations, custom intake systems, and more
• Ensures durability and longevity for your automotive projects

Upgrade your BMW N55 engine with our Silicone Crank Case Vent Hose, a premium replacement for the fragile, failure-prone factory hose. Over time, the stock plastic hose deteriorates due to constant exposure to heat and oil, leading to cracks and leaks. Our solution? A high-quality silicone hose engineered for superior durability and long-term reliability.

To further enhance performance, we’ve lined the hose with fluorosilicone, providing exceptional resistance to oil and chemical degradation. Designed in-house using advanced CAD modeling and 3D scanning, this hose offers a precise OEM fit while eliminating the common weaknesses of plastic construction.

Each kit includes stainless steel hose clamps for a secure, hassle-free installation. Whether you’re replacing a worn-out CCV hose or upgrading for added peace of mind, this premium solution ensures your BMW N55 runs smoothly and efficiently for years to come.

Features:

Direct OEM Fit – Retains factory hose dimensions while eliminating reliability issues.
High-Performance Silicone – Resists heat-related wear for long-lasting durability.
4-Ply Fluorosilicone Lining – Superior protection against oil and chemical exposure.
Stainless Steel Clamps Included – Secure installation and extended service life.
Give your BMW N55 the reliability it deserves—upgrade to the ECS Silicone CCV Hose today!

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

• Durable silicone construction
• Smooth interior surface for efficient airflow
• Flexible and reinforced design prevents leaks
• Secure fit for reliable performance
• Hassle-free installation

All of the tuning in the world is only as good as the weakest link. More boost in your 135/335 is great! But you will soon learn that some of the factory hardware is not up to the task of handling that extra pressure. One of the first things to fail and cause a boost leak are the factory boost diverter valves. This allows boost to "leak" out of the intake stream and a loss of power from the engine. This ECS Tuning chargepipe upgrade includes a blow-off valve in place of the factory diverter valves. The BOV is higher quality than the diverter valves and will exit intake air to the outside instead of putting it back through the turbo system (which will reduce strain on the turbos). This aluminum chargepipe is also much more robust than the stock plastic factory pipe and the connection to the throttle body is stronger, eliminating another failure point of the stock pipe.

Built-in 1/8" NPT ports allow you to run an additional methanol injection kit (bungs included if you don't want use the ports).

This is a complete kit that includes everything you need to replace the factory chargepipe and diverter valves -

powedercoat chargepipe ECS Tuning blow-off valve Includes three interchangeable BOV springs, allowing you to tailor venting function to your existing modifications. 1.9 (For use with factory software) 2.0 (Pre-installed in the SQV BOV - suitable for stock or "Stage One" software) 2.2 (Suitable for "Stage Two" software) vacuum plugs for the stock diverter valve hoses silicone hose connection to intercooler piping all hardware and hose clamps with instructions

Upgrade your N54/N55 performance effortlessly with this "OEM+" Intercooler from ECS Tuning! This premium intercooler is engineered to deliver superior cooling efficiency and increased horsepower without the hassle of extensive bumper/core support modifications.

Key Features:

Enhanced Core Depth: Featuring a robust aluminum bar and plate core, this intercooler ensures optimal heat dissipation for peak performance. Durable Construction: TIG-welded cast aluminum end tanks provide unmatched durability, replacing the factory's plastic components. Perfect Fitment: Designed to fit just like the OEM unit, it requires no additional brackets or modifications to the bumper or core support. Compatibility: Works seamlessly with OE charge pipes and pipe connectors for easy installation. Benefits:

Improved Cooling Efficiency: Significantly lowers intercooler outlet temperatures, ensuring your engine runs cooler and more efficiently. Increased Durability: Aluminum end tanks offer enhanced durability and longevity compared to factory plastic construction. Hassle-Free Installation: No need for trimming the front bumper or modifying the radiator support, making installation straightforward. Whether you're after increased performance or an OEM purist, the ECS Tuning OEM+ Intercooler is the perfect upgrade for your BMW. Enjoy the benefits of increased horsepower and lower temperatures with an easy, hassle-free installation.

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

• Provides a secure and leak-free connection
• Engineered for durability and flexibility
• Straight design for easy installation
• Perfect fit for BMW and MINI vehicles

The ECS Kohlefaser Luft-Technik (Carbon Fiber Air Technology) intake for the 135/335/535 is a beautifully crafted dual-cone intake with a glossy carbon fiber enclosure. Developed in-house using ECS's chassis dyno and state of the art laser scanning and 3D CAD technology, the N54 carbon airbox is a direct replacement for the stock system. Laser scanning allows ECS to produce a finished product that is a perfect fit to the engine bay. All tubing is also made from carbon fiber with each piece designed for optimal flow. The carbon fiber sandwiches a special heat-blocking fiberglass core, insulating the air box from engine bay heat. All of this combines to produce more power and torque over a wider RPM range - up to 13ft-lbs and 18hp when combined with a Cobb software tune, FMIC, and exhaust. And it looks amazing every time you open the hood.

135/335/535 ECS Carbon intake features -

• Designed and engineered using CAD technology for optimal flow and fitment
• Dyno proven power and torque gains backed with real-world testing
• Washable/reusable high flow cotton filters (pre-oiled)
• Stainless steel hardware
• Direct replacement for stock air box; integrates seamlessly with stock intake piping
• Beautiful and functional carbon fiber/e-fiberglass construction

Looking to improve your intake without having to tear apart your engine bay? Then this drop-in performance air filter may be the perfect option for you! Allowing for much higher and easier air flow than the stock BMW filter, this filter allows your engine to breathe much easier at any RPM, freeing up horsepower and torque that normally would have been locked away.

Thanks to the direct replacement style of this filter, no modifications need to be made to the intake components. Just pull out your old filter, place this filter in the stock location, and enjoy!

If you already have the ECS open cone filter for you N54 car then this is the perfect add-on upgrade for your system to really clean up the engine bay and keep your cone filters much cleaner. When you upgrade to the enlcosed filter kit your filters will be surrounded more more consistent cold air and by protecting the filter from engine bay dirt you are reducing the risk of air flow problems from build up.

The ECS Kohlefaser Luft-Technik (Carbon Fiber Air Technology) intake for the 135/335/535 is a beautifully crafted dual-cone intake with a glossy carbon fiber enclosure. Developed in-house using ECS's chassis dyno and state of the art laser scanning and 3D CAD technology, the N54 carbon airbox is a direct replacement for the stock system. Laser scanning allows ECS to produce a finished product that is a perfect fit to the engine bay. All tubing is also made from carbon fiber with each piece designed for optimal flow. The carbon fiber sandwiches a special heat-blocking fiberglass core, insulating the air box from engine bay heat. All of this combines to produce more power and torque over a wider RPM range - up to 13ft-lbs and 18hp when combined with a Cobb software tune, FMIC, and exhaust. And it looks amazing every time you open the hood.

Features:

• Designed and engineered using CAD technology for optimal flow and fitment
• Stainless steel hardware
• Direct replacement for stock air box; integrates seamlessly with stock intake piping
• Beautiful and functional carbon fiber/e-fiberglass construction