BMW Intake Parts for BMW 1 Series

This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.

In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.

Features:
Powdercoated heat shield
Polished short ram tubing
+11hp/10ftlbs.

Kit Includes:
Short ram intake piping
Heat shield 
SuperNano Dry Web Dry Filters
Mounting hardware
Instructions

This part fits the following BMWs:
2007-2011 BMW 328I (E90/92/93) 
2008-2013 BMW 128I (E82/88) 
2006 BMW 325I AND 330I (E90) 

In addition to the weak stock chargepipe, the factory N54 diverter valves can also be a source for boost leaks. The diverter valve takes overboost and re-directs it back through the intake and turbos instead of allowing it to pass into the intake manifold. It's the same as a blow off valve (BOV) but instead of releasing into the engine bay, it stays contained to the engine. The stock diverter valves (DV) are plastic and connect with more plastic into the chargepipe and turbo inlet pipes. The plastic can become brittle and crack even on stock engines and leak boost, which leads to a loss in power and performance.

Turbosmart has developed two kits to replace and upgrade the stock diverter valves - a direct replacement kit (shown) and a combination DV/BOV "Dual Port" kit. This direct replacement kit includes new high-performance DV and stronger silicone hose to connect them to the turbo inlet pipes (Vargas silicone inlets are recommended). The Turbosmart Kompact DV will give you all of the strength and reliability you need to take your turbo build to the next level.

You will also need T#553932 

• Seamless plug-and-play installation
• Minimizes leakage for enhanced turbocharger performance
• Retains OE control for optimal operation
• Superior thermal performance to maximize boost without stressing the turbocharger

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Fits the Following BMWs:

E82 E88 135i N55
E90 E92 E93 335i 335xi N55

Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.

Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified. 

The Full Kit consists of everything included in the Standard Kit but adds the Turbo to Intercooler Pipe Kit (TIC Pipe). Increase throttle response, as well as decrease turbo lag, are the benefits of the new TIC Pipe Kit.  With the Full Kit, ALL the factory rubber and plastic intercooler pipes will be replaced.  You will have full hard piping throughout your system.

Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.

Features:

• Designed specifically to fit (and look good) on the 228i, 328i, and 428i.
• Large 20"x11"x3" (26"x11"x3" with end tanks) High Density Bar & Plate Construction Intercooler Core
• Cast end tanks for improved durability and internal flow characteristics.
• Brush finish standard
• Optional Polished finish available.
• Optional Type III Hard Black Anodizing (for stealth) finish on the intercooler, end tanks, and all piping.  Hard anodizing helps improve the durability of intercooler fins against damage from road debris (rocks).
• Features the factory style connectors.  Fully compatible with factory piping or aftermarket piping utilizing factory style connectors.  Compatible with our charge pipe upgrade kit.
• Maintains ALL factory components.  No modifications required.  100% bolt on.
• Includes all hardware needed to install.
• Developed and tested for over a year under the harsh conditions of racing.
• Limited Lifetime Warranty.

Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded turbo intercooler piping with silicone couplers
Upgraded charge pipes with silicone couplers
Installation Hardware

Improve the performance of your BMW's N54 3.0L engine with the HKS BOV in a striking silver finish. Blow off valves play a crucial role in turbocharger systems, and selecting the right one is essential when enhancing the performance of a turbocharged vehicle. The aftermarket HKS BOV, tailored for larger quantities of air and higher pressures, ensures optimal handling of additional airflow.

• Enhanced Turbocharger Performance: The HKS BOV is designed to complement turbocharger systems, optimizing overall performance.
• Increased Airflow Handling: Aftermarket blowoff valves handle larger quantities of air, accommodating the demands of performance accessories.
• Silver Finish: The distinctive silver finish adds a touch of style to your BMW's engine bay.
• Tailored for Higher Pressures: Specifically designed to cope with increased pressures associated with performance upgrades.

Upgrade your BMW's N54 3.0L engine with the HKS BOV in silver, ensuring a reliable and stylish addition to your turbocharger system.