BMW Suspension Parts for BMW 3 Series E90 (2006-2011)

The Bilstein B8 Performance Plus Kit includes two front struts and two rear shocks. These shocks are for use with lowered springs such as from H&R or Eibach. We do not recommend that you use them with any factory spring, including factory sport package springs. With the increased damping rates from stock you will have much more control over body motions. These will give a much more buttoned down and taut feeling with lowering springs compared to stock shocks.

These shocks fit the following BMWs:

2006-2011 E90 Sedan 325i, 328i, 330i, 335d, 335i
2006-2013 E92 Coupe 325i, 328i, 330i, 335i
2007-2013 E93 BMW 328i 335i - Convertible

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Suspension Bushings
Control Arm Bushings
Hardware
Rear Shock Mounts
Control Arms & Trailing Arms

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs. 

This item fits the following BMWs: 
2006-2012 E9X BMW All xi models - 325xi 328xi 330xi 335xi

Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. These poly inserts provide the inherent benefit of stiffness, which translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. The Bilstein B6 Performance Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.


This Bilstein B6 Performance shock package fits the following BMWs:

2006+ E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
2006+ E91 BMW 325xi 328xi 328i xDrive - Wagon
2007+ E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe

Elevate your BMW's suspension performance with the BILSTEIN B6 Performance series shock absorbers and struts. Engineered for precision handling and exceptional ride quality, these components offer an unmatched driving experience.

• Monotube gas pressure construction ensures superior performance
• Enhanced safety and sportiness on the road
• Improved stability and increased traction
• Maintains ride comfort while enhancing durability and performance
• Road-tested and fine-tuned by BILSTEIN for specific vehicle applications
• Limited lifetime warranty ensures quality and reliability*

For lowered springs or factory sport suspension, Bilstein recommends their B8 Performance Plus shocks and struts for an optimized experience.

*Bilstein offers a limited lifetime warranty to the original retail purchaser, ensuring freedom from defects in material and workmanship. Proof of purchase is necessary for warranty processing. Contact Turner Motorsport for additional warranty details.

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Sway Bar End Links
Rear Trailing Arm Bushings
Rear Strut Mounts
New Hardware

Enhance your BMW's suspension performance with the BILSTEIN B6 Performance series shock absorbers and struts. These components offer unparalleled control, precise handling, ultimate performance, and remarkable comfort, elevating your car's ride quality to new heights.

Features and Benefits:

• Monotube gas pressure construction ensures superior performance.
• Improved safety and sportiness for an enhanced driving experience.
• Added traction and stability for better handling on various road conditions.
• Increased durability without compromising ride comfort.
• Road-tested and fine-tuned by BILSTEIN for each specific vehicle application.
• Limited lifetime warranty* ensures product durability and quality assurance.

If you're considering adding lowering springs or already have factory sport suspension, BILSTEIN recommends the B8 Performance Plus shocks and struts for optimal performance.

*Bilstein offers a limited lifetime warranty, ensuring that each Gas Pressure Shock is free from defects in material and workmanship. Proof of purchase is required for warranty processing. Contact ECS Tuning for further warranty details.