BMW Intake Parts for BMW 3 Series E90 (2006-2011)

The CTS Turbo 7.5' Race FMIC upgrade for the BMW E82 135i and BMW E90/E92/E93 335i is an excellent upgrade for those pushing past 800hp.

This kit provides significant cooling improvement compared to the competition, and substantial cooling benefits over the factory setup.  Improvements can be attributed to the high-density bar-and-plate intercooler core and high-flow cast aluminum end tanks.

End tanks are flared to ensure you don’t have to worry about your boost tubes blowing off or leaking.  If that wasn’t enough for you, this kit also uses 4-ply silicone couplers and stainless steel T-Bolt clamps.

Note: On some models, a small amount of trimming may be required to the plastic intercooler shroud; no trimming of the bumper is necessary. This will not affect the integrity or aesthetics of the bumper.

Features:

• Huge 11' tall x 7.5' thick high-density bar-and-plate core
• Cast aluminum end tanks, CAD designed for maximum efficiency
• Easy install with only minimum trimming required
• Intercooler pipe, silicone coupler, and t-bolts clamps included

It fits all E82, E90, E92, and E93 vehicles, LHD and RHD models; RWD and X-drive models.

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

In addition to the weak stock chargepipe, the factory N54 diverter valves can also be a source for boost leaks. The diverter valve takes overboost and re-directs it back through the intake and turbos instead of allowing it to pass into the intake manifold. It's the same as a blow off valve (BOV) but instead of releasing into the engine bay, it stays contained to the engine. The stock diverter valves (DV) are plastic and connect with more plastic into the chargepipe and turbo inlet pipes. The plastic can become brittle and crack even on stock engines and leak boost, which leads to a loss in power and performance.

Turbosmart has developed two kits to replace and upgrade the stock diverter valves - a direct replacement kit and a combination DV/BOV "Dual Port" kit (shown). This Dual Port Kit is a DV and a BOV together in one unit. An internal valve directs some of the charged air into the turbo inlets and the rest is dumped into the engine bay like a traditional BOV. The amount of boost released into the air is determined by an internal spring in the Dual Port unit (additional springs are also available). This allows you to custom tailor how much boost and BOV "whoosh" you hear. In addition to the DV/BOV combo, stronger silicone hose is included to connect them to the turbo inlet pipes (Vargas silicone inlets are recommended). The Turbosmart Kompact Dual Port will give you all of the strength and reliability you need to take your turbo build to the next level.

You will also need T#553932 

This alloy hard pipe fits to the throttle body and incorporates our high flow Blow off valve. This new valve fresh from our R&D department is the largest displacement valve that Forge have ever made ! Featuring a 50mm (2”) aluminium piston so that there are no issues with split diaphragms, we have not found the power handling limits of this valve yet ! The piston uses heat stabilised viton o-rings and high temperature Mobil 1 grease to ensure a long life with minimal wear and very long service intervals.

All parts are included in the kit, for your installation, along with comprehensive instructions.

This product fits the following BMWs:
2008 - 2013 E82 135i 
2007 - 2013 E9x 335i

Upgrade Your BMW with Wagner Tuning Intercoolers

Experience the pinnacle of performance with Wagner Tuning's precision-engineered intercoolers and down-pipes, proudly designed and engineered in Germany. These intercoolers are expertly crafted to eliminate pressure drop, enhance airflow efficiency, and maintain low intake temperatures, resulting in maximum power gains for your BMW. Constructed from premium materials, they offer significant weight savings over stock intercoolers and are specially coated for long-lasting durability and reliability.

• Designed and engineered in Germany
• Eliminates pressure drop for improved performance
• Enhances airflow efficiency
• Maintains low intake temperatures
• Premium materials for weight savings
• Specially coated for durability

Replacement stock air filter element for the stock BMW air box of the 2006+ E90/E91/E92/E93 3 Series 325i, 330i, 328i & 328xi.

This air filter fits the following BMWs:
2006 E90 3 Series Sedan - 325i, 325xi, 330i & 330xi
2007+ E90 3 Series Sedan - 328i & 328xi
2007+ E92 3 Series Coupe - 328i & 328xi