Turner Motorsport for BMW 3 Series E90 (2006-2011)

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with the carbon fiber splitter upgrade. 

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

There are a few reason having a catch can is an upgrade for a vehicle, from a separator system that no longer works to one that was never there. Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits and carbon buildup in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence oil mist can in the intake charge even increase the risk of engine damaging detonation. 

With direct injected engines this problem becomes more prevalent, and the N54 in your 135i or 335i is no exception.  We're seeing a lot of N54 powered cars with drivability and performance issues due to significant carbon buildup in the intake ports and backs of intake valves.  The “factory fix” is a walnut blasting service that commonly needs performed every 30,000 to 70,000 miles.  Don't be part of this statistic!  Our shop recommends an oil catch can be installed in-line in the PCV system to help reduce the build-up of performance robbing deposits and greatly reduce the need for costly walnut blasting service and related repairs in the future.

​ The catch can utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The Turner Motorsport Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation. Another feature the Turner catch can has is the ability to add on a drain kit so you no longer have to fumble around getting the fill can out of a tight space. The drain can be run down to the belly pan of your car so draining can be done at the same time you change your oil or anytime in between.

*Click here for catch can instructions *

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• 8oz reservoir
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Driver side mounting kit - Designed specifically for your N54!

New to our line of exceptional performance upgrades for your BMW, the Turner Motorsport E9X M3 (S65) Titanium Valved Axle-back exhaust system is here to improve your driving experience with hearty exhaust notes and a noticeable bump in performance. With the muffler valves closed, this exhaust is both tame and fine tuned. Nobody will suspect your car even has an aftermarket exhaust system, it will sound similar to the factory system but with the perfect hint of exotic character. When you open up the valves, using the supplied valve controller, this exhaust transforms your car into the exotic beast that it is!

Now, we get it, not everyone can, or wants to delete their factory cats. Whether it be emissions testing or a check engine light, the smell of unfiltered exhaust, the very aggressive sound, or warranty reasons. Whatever the reason, We've got you covered! This exhaust setup leaves all 4 factory cats in place, making it 100% emissions legal for everyone.

This exhaust sports Mandrel bent dual 2.5” Ti22 pipes, with exhaust gases flowing through efficient piping to High flow, valved, Ti22 mufflers. Designed to mount with the factory exhaust hangers, this exhaust is a bolt-on replacement for the OE version. To help reduce the time you spend under the car installing the system, Accuseal slip-fit joints are included to make fitment as easy as possible. The Turner Motorsport full exhaust system includes a High flow, valved,Ti22 muffler and is available as an Axle Back, Cat-back system, as well as a full Turbo back system.

Give your M3 the dual-purpose exhaust system that satisfies your need for sound while having the ability to drive through the neighborhood at night with the Turner Motorsport E9X M3 full exhaust system!

Kit Includes:

Turner Axle back Exhaust with X pipe
Turner Adapter pipes for Factory Mid Pipes
Turner Muffler Valve Controller Kit
Turner Engraved Exhaust Tips
Features:

Mandrel bent dual 2.5” Ti22 pipe with brushed finish
Turner Engraved Brushed exhaust tips
High flow, valved, stainless steel mufflers
Accuseal slip fit joints for easy fitment
Utilizes factory exhaust hangers

Oftentimes, the first thing you will notice about your manual BMW is that the stock shifter throws are miles and miles long. We developed our short shifter kit as a solve for this common complaint about manual transmission BMWs. Our new short shifter kits are the culmination of years of research and development - we went back to the drawing board several times throughout the design process, in efforts to release a product that really stood out from the rest of the short shifters on the BMW market. We set out to design the perfect shift kit for your BMW. Now we realize perfect is a subjective term, so we gave our short shifter a wide range of height and throw adjustability. This wide range of adjustability allows you to easily make adjustments from the cabin of your BMW by just removing your shifter boot and using small hex head keys.

We made our short shifter for all of you. The weekend warriors, the trackday monsters, and even the daily drivers. We wanted to make something that made sense for any BMW enthusiast. For those who want to drive your car to the track, drive some hotlaps, and then drive back home, we developed a rally lever extension. Our rally lever extension allows you to keep your hands close to the steering wheel through shifts, in efforts to quicken shifts and reaction times on the track. The rally lever comes off and on in seconds with the unique locking design we engineered. After your track day win, you can easily swap back to the short lever for more comfortable daily driving.

Installation of this kit is one of the easiest to take on compared to the competition - our custom bearing cup allows for easy installation from inside of the car (on applications that use the stock shifter arm). 

*Click HERE for the instillation PDF!

Performance features

• Ultra crisp shifter feel
• Adjustable between a conservative short throw to ultra short throw
• Quick, precise shifting
• More engaging driving experience

Easy installation and swap out​

• Bearing cup allows for easy installation from inside of the car (on applications that use the stock shifter arm).
• “Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.

Adjustments

• Independently adjustable knob height
  • 22mm adjustment range to fine tune shifter throw and feel.
  • Note: knob height also affects throw reduction to some degree
• Independently adjustable shifter throw
  • Adjustable by raising and lowering the lower lever position relative to the pivot ball.
  • Note: ball position also affects knob height by ~10mm range.
• Combined total throw adjustment range
  • ​24 to 45% reduction in throw over stock E90 M3 shifter.
• Throw adjustment can be done in the car without removing the shifter
  • Throw adjustment is accomplished by loosening set screw in shifter ball and rotating the ball within the cap using a couple of simple tools. 

Design Features

• Lower Shifter Assembly
  • CNC machined from 4140 chromoly steel and melonite coated for superior strength and exceptional durability and corrosion resistance.
  • Shifter ball CNC machined from 304 stainless steel, finely polished for smooth operation and bushing wear resistance.
  • Ball socket shifter bushings are precision machined from Nylatron® NSM.
    • self-lubricating and offers better wear resistance and impact resistance than other “premium” bearing grade plastics.  
    • Provides a positive shifter feel that never fades because of worn out bearings or bushings.
    • Precision tolerance fitment in the bearing cup eliminates unwanted ball socket movement.
  • Lower selector rod bushings precision machined from Nylatron® NSM
    • Precision fit tolerance on the selector rod to eliminate shifter linkage play.
    • Provides the ultimate in low friction, self-lubrication, wear resistance and impact resistance compared to other “premium” bearing grade plastics.
  • Lower shift arm has an adjustment range of 10mm to dial in the throw and feel of your shifter.
    • Lower shift lever is locked in place by tightening provided set screw in the stainless steel ball.

• Rally Upper Shift Lever
  • Compatible with stock shift boot fits nicely into the machined groove at the bottom of the lever to maintain a clean look in the interior.
  • Machined from 6061-T6 aluminum and type II anodized for exceptional durability and corrosion resistance.
    • Available in either black or clear anodize to match your vehicle’s interior.
  • Rally shift knob is machined from black delrin.
    • Unlike aluminum, delrin will not hold heat so on those hot days you won’t have to worry about burning your hand on a knob that’s been baking in the sun.  
    • Shift knob is threaded onto the end of the shift lever utilizing a standard ⅜-16 thread to allow for easy removal and attachment of your favorite beer tap or other accessory.
  • “Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.
    • 22mm adjustment range to fine tune shifter throw and feel.

• Standard Shift Lever
  • Compatible with OE BMW shift knobs or aftermarket shift knobs.
  • CNC machined from billet 6061-T6 aluminum and type II black anodized for exceptional durability and corrosion resistance.
  • “Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.
    • 22mm adjustment range to fine tune shifter throw and feel.

• Shifter Bearing Cup Assembly
  • CNC machined from billet 6061-T6 aluminum and type II blue anodized for exceptional durability and corrosion resistance.
  • Shifter cup encapsulates shifter components allowing for easy installation from inside of the car.
    • Bushings, lower shifter assembly, spring, retaining washer and snap ring can be easily installed inside the cup before installing in vehicle.
    • Cup installs into OE shifter arm with supplied clamp and socket head cap screws.
      • Installation can be done from inside the car without having to remove the OE shifter arm to install screws from the side.
  • Shifter bushings and cup are machined to tight tolerances to eliminate slop or play in the shifter assembly for a positive shifter feel.

This item fits the following BMWs:
2006 E90 BMW 330i - Sedan

Upgrade your stock front bumper with this M Sport front bumper cover. Aggressively designed by BMW to set your E90 apart from the rest.

Includes the following

• Front bumper cover
• Fog lamp grilles
• Lower grilles
• Tow hook cover

Does not include fender liners or air ducts. For vehicles without PDC control or auto cruise control with headlight washers

This M Sport style front bumper / front spoiler fits the following BMWs: 
E90 BMW  325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan 
E91 BMW  325xi 328i 328xi 328i xDrive - Wagon 

• 55MM, 75MM, 90MM LENGTHS
• Black phosphorous corrosion resistant coating
• "OEM" appearance
• Full-length threads for more nut engagement in tight spaces
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

These wheel studs are the same as our hugely popular Bullet Nose studs but with threads along the full length of the stud. This gives you more threaded area for tightening wheel nuts or allows the use of a closed-end wheel nut. These also have a more OEM appearance. Although these are a lower cost version of our Bullet Nose studs, they are every bit as strong, durable, and safe. The Bullet Nose is an upgrade because it's easier to install and almost impossible to cross-thread a nut.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

Sold per stud.