A sloppy shifter is one of the common complaints of older BMWs. In addition to the shifter linkage the transmission mounts contribute to rough and clunky shifting. BMW transmission mounts are rubber and get softer over time. This allows the transmission to dance around which changes the geometry of the shift linkage and could make it harder to shift. These urethane transmission bushings are stiffer than the stock rubber mounts and won't let the transmission shift around as much. The round design also has more surface area than the stock mounts which helps spread the load. Because the urethane is stiffer, expect more vibration to make its way into the shift lever area. Engine motor mounts should also be considered as a cause for driveline vibration, transmission movement, and poor shifting. Consider replacing your motor mounts at the same time as your tranny mounts.

Price is for the pair of transmission mounts with hardware.

This item fits the following BMWs: 
1989-1995  E34 BMW  525i 530i 535i 540i M5 
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1997-2003  E39 BMW  525i 528i 530i 540i M5 
1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 
2008-2012  E82 BMW  128i 135i 1M Coupe 
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan 
2006-2012  E91 BMW  328i - Wagon 
2007-2013  E92 BMW  328i 335i 335is - Coupe 
2007-2013  E93 BMW  328i 335i - Convertible 
1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

The perfect upgrade for your connection between your thermostat and cylinder head. Designed using durable silicone and billet aluminum to greatly outlast the OE rubber and plastic combination.

Some of the weakest point of the cooling systems in BMW's can come down to the OE plastic fittings breaking down from the constant changes in temperature softening these plastic components. When this happens even simply moving the hose slightly could cause the fitting to crack causing the coolant to leak all over. The ECS design silicone hose with billet aluminum adapter retains OE fitment with superior strength to not only handle the performance, but stand up to the wear and tear of a daily driver.

Features: 

• Manufactured from billet 6061-T6 with type III anodize for exceptional durability and corrosion resistance.

  • Much stronger part than OEM plastic

  • Will not become brittle and fatigue over time due thermal cycling.  This will prevent the part from breaking during removal and re-installation.

• Constructed of 4-Ply reinforced silicone for improved durability over the failure prone OE rubber hose.
• Flourosilicone lined internal layer for exceptional chemical resistance.
• Silicone offers reduced thermal conductivity as well as improved resistance to ozone and UV degradation for improved performance and durability.
• Follows OEM form for perfect fitment.
• Utilizes OEM O-ring 11537545278 to ensure a proper seal.

Upgrade your N54/N55 performance effortlessly with this "OEM+" Intercooler from ECS Tuning! This premium intercooler is engineered to deliver superior cooling efficiency and increased horsepower without the hassle of extensive bumper/core support modifications.

Key Features:

Enhanced Core Depth: Featuring a robust aluminum bar and plate core, this intercooler ensures optimal heat dissipation for peak performance. Durable Construction: TIG-welded cast aluminum end tanks provide unmatched durability, replacing the factory's plastic components. Perfect Fitment: Designed to fit just like the OEM unit, it requires no additional brackets or modifications to the bumper or core support. Compatibility: Works seamlessly with OE charge pipes and pipe connectors for easy installation. Benefits:

Improved Cooling Efficiency: Significantly lowers intercooler outlet temperatures, ensuring your engine runs cooler and more efficiently. Increased Durability: Aluminum end tanks offer enhanced durability and longevity compared to factory plastic construction. Hassle-Free Installation: No need for trimming the front bumper or modifying the radiator support, making installation straightforward. Whether you're after increased performance or an OEM purist, the ECS Tuning OEM+ Intercooler is the perfect upgrade for your BMW. Enjoy the benefits of increased horsepower and lower temperatures with an easy, hassle-free installation.

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips feature a stunning matte titanium finish and a slant-cut, single-wall outlet for a sleek appearance. Engineered for durability, they include chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Elegant matte titanium finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a refined look
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

Modern emission regulations require a closed PCV/Breather system for cleaner operation. However, inefficient oil particle capture can lead to excessive oil vapor ingestion, causing carbon buildup, reduced performance, and fuel economy. ECS Tuning's updated ECS Baffled Oil Catch Can, now with an easy-to-empty 1/4" drain fitting, is engineered to collect toxic blow-by gases, minimize carbon deposits, and reduce oil contamination within engine oil. Recirculating oil vapor ensures emissions compliance without venting to the atmosphere.

• Key Features:
• Highly Efficient Oil Separator: Strategically positioned 4 chamber baffle system maximizes oil/air separation and minimizes oil droplets in the intake tract.
• Integrated Dipstick: Knurled and black anodized oil dipstick simplifies oil volume inspection.
• Reservoir: Available in 6oz or 8oz capacity with a 1/4" NPT drain plug fitting.
• Serviceable: Easily removable baffle plates and drain plug for cleaning.
• Easy/Customizable Installation: Combine with the ECS Universal Bracket Kit for simplified installation and adjustable mounting locations.
• Leak-Free Fittings: Machined -10AN ORB (O-Ring Boss) fittings available for secure connections (fittings sold separately).

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

• Allows for seamless connection between downpipe and cat-back exhaust
• High-quality construction for durability
• Tight seal reduces exhaust leaks
• Enhances overall exhaust flow
• Easy installation and compatibility with various exhaust systems

Meet modern emission regulations while preserving engine performance with the ECS Baffled Oil Catch Can. Designed for BMW and MINI vehicles, this system efficiently captures blow-by gases, preventing excessive oil vapor ingestion into the intake tract. The innovative 4-chamber baffle system maximizes oil/air separation, reducing carbon build-up and pollutants. Featuring a 1/4" drain fitting for easy maintenance, this catch can minimizes oil deposits, ensuring cleaner emissions and enhanced engine performance.

Key Benefits:

• Efficient 4-chamber baffle system for maximum oil/air separation
• Recirculated design reduces oil ingestion, promoting cleaner emissions
• Durable 6061-T6 billet machined body with anodized black finish for longevity
• Integrated dipstick and sealed reservoir for easy oil inspection and maintenance
• Serviceable design with removable baffle plates for cleaning
• Easy installation with customizable mounting options and leak-free fittings
• Engineered and manufactured in the USA for superior performance and durability

Note: Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

BMW E3X Wheel Stud Conversion Kit - Half set

Enhance your BMW E3X's performance and safety with the BMW E3X Wheel Stud Conversion Kit - Half set. This kit allows for easy conversion from lug bolts to wheel studs, providing a more secure wheel mounting solution. Engineered for durability and reliability, it ensures optimal wheel alignment and reduces the risk of stud breakage. Upgrade your BMW E3X with this premium wheel stud conversion kit today.

• Easy conversion from lug bolts to wheel studs
• Provides a more secure wheel mounting solution
• Ensures optimal wheel alignment
• Reduces the risk of stud breakage for improved safety

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:
2006-2011 E90 BMW 330i 330xi 335i 335xi - Sedan
2007-2013 E92 BMW 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 335i 335is M3 - Convertible

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

Elevate your BMW's security with the BMW Conical Seat Locking Wheel Bolt Kit. This comprehensive kit provides peace of mind by securing your wheels against theft. Engineered specifically for BMW vehicles, these locking wheel bolts offer a precise fit and reliable performance. Say goodbye to worries about wheel theft and enjoy enhanced protection for your BMW with this essential locking bolt kit.

• Enhances security for BMW wheels
• Precision engineered for a perfect fit
• Provides peace of mind against wheel theft
• Specifically designed for BMW vehicles

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

BMW E30 Wheel Stud Conversion Kit - Full Set

Transform your BMW E30 with the BMW E30 Wheel Stud Conversion Kit - Full Set. This comprehensive conversion kit is designed to enhance the performance and convenience of your vehicle. With high-quality wheel studs included, it ensures secure wheel mounting for added safety on the road. Upgrade your BMW E30 with this kit and enjoy the following benefits:

• Improved wheel mounting security
• Easier wheel installation and removal
• Prevents stripped lug bolts
• Durable construction for long-lasting performance

Upgrade the wheel setup of your BMW with the BMW Wheel Stud Conversion Kit - Half set. This high-quality conversion kit allows you to replace your existing wheel bolts with wheel studs, providing easier wheel installation and improved stability. Engineered specifically for BMW models, this kit includes everything you need for a half-set conversion. Enhance the performance and convenience of your BMW with this premium wheel stud conversion kit.

• Easier wheel installation compared to traditional bolts
• Improved stability and safety with wheel studs
• Engineered specifically for BMW models
• Includes everything needed for a half-set conversion

Wheel Stud Conversion Kit - Half Set: Enhance Your BMW's Performance

• Allows for easier and quicker wheel changes
• Provides a more secure and reliable wheel mounting solution
• Reduces the risk of stripped lug bolts
• Compatible with various BMW models

Upgrade the performance of your BMW with the Wheel Stud Conversion Kit - Half Set. This kit allows for easier and quicker wheel changes, providing a more secure and reliable wheel mounting solution compared to traditional lug bolts. With reduced risk of stripped lug bolts, you can enjoy peace of mind while driving your BMW. Plus, the kit is compatible with various BMW models, ensuring versatility and ease of installation.

BMW E90 E91 M3 Style Front Bumper Conversion

The BMW E90 E91 M3 Style Front Bumper Conversion offers an affordable way to achieve the iconic M3 look without the high OEM costs. Turner Motorsport presents this high-quality M3 replica front bumper, crafted to exact specifications from flexible ABS plastic, ensuring a factory-like appearance and perfect fit.

Benefits:

• Authentic M3 Style: Replicates the distinct M3 look for a sleek and aggressive appearance.
• High-Quality Construction: Made from flexible ABS plastic for durability and a precise fit.
• Complete Kit: Includes all necessary components for a seamless installation, with no need to source additional parts.
• Affordable Alternative: Provides a cost-effective solution to achieve the M3 aesthetic without compromising on quality.
• Turner Motorsport Assurance: Manufactured to the highest standards and rigorously tested for performance and fitment.

Includes:

• M3 Bumper Cover
• Lower Grille
• Fog Lights and Trim

Enhance Your BMW's Appearance with M Styling

Transform your BMW's appearance with this replacement rear bumper, adding aggressive M styling to your vehicle. Available in primer, this bumper is ready for painting, allowing you to customize the look of your BMW effortlessly. Specifically designed for compatibility with quad-tip (Dual-exit) exhaust systems, it ensures a seamless integration with your vehicle's existing setup.

• Adds aggressive M styling to your BMW
• Primer finish ready for painting
• Compatible with quad-tip (Dual-exit) exhaust systems
• Easy to install and customize