BMW Internal Engine Parts for BMW 3 Series E93 (2007-2013)

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Performance S65 BE Bearings Rod Bearing & Rod Bolt Lvl2 Kit- E9X M3 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:13463763

Part#: 11247838088DBEKT

Ships on Nov 2, 2026

$ 981.99 USD

Add to Wish List

Qty

$ 981.99 USD

Add to Wish List

BE Bearings, in collaboration with Clevite, a leading OE bearing manufacturer, has revolutionized rod bearings for your peace of mind. Our redesigned bearings offer enhanced clearance and feature a shift from the original tin-aluminum composition to lead-copper. This upgrade incorporates the cutting-edge Clevite Tri-Metal design and boasts a Tri-Armor™ coating, ensuring superior lubrication for wear prevention. Moreover, these softer bearings are gentler on your engine and more tolerant of foreign particles suspended in your oil. Additionally, this upgrade enables precise wear assessment through oil testing. Our comprehensive kit includes: Upper and lower BE Bearings upgraded rod bearings Essential hardware Oil filter Oil pan gasket RedLine assembly lube Secure your BMW E9X M3's engine with our rod bearing kit and enjoy peace of mind on the road.

Show More Show Less

Performance S65 BE Bearings Rod Bearing & Rod Bolt Lvl3 Kit- E9X M3 (...

10X Entries Into Our F80 M3 Sweepstakes

T#:5403237

Part#: 11247838088TMSKT

Ships on Nov 2, 2026

$ 1,118.99

This product was last offered at the strikethrough price on
09-01-2026

$ 1,117.99 USD

Add to Wish List

Qty

$ 1,117.99 USD

Add to Wish List

Includes BE Bearings Rod Bearings, BE Bearings Connecting Rod Bolts, 9 Qts Liqui Moly GT1 10w-60 oil, Genuine BMW Hardware and Liqui Moly LM 48 Assembly Lube - 50g

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

Ships in 1-2 days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

N52 Valvetronic Camshaft Adjuster Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:5416764

Part#: 11377548388TMSKT

In Stock

Sale - Save 19% $ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD

Add to Wish List

Qty

Sale - Save 19%

$ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD

Add to Wish List

Includes new Valvetronic motor, gasket, and hardware. The Valv-tronic adjuster unit changes the the timing shaft to adjust the valve timing.

Rod Bearing Overhaul Kit - E9X M3 S65

10X Entries Into Our F80 M3 Sweepstakes

T#:340426

Part#: TMS222795

In Stock

Sale - Save 5% $ 1,529.99

This product was last offered at the strikethrough price on
10-06-2026

Starting at $ 1,449.40 USD

Add to Wish List

Sale - Save 5%

$ 1,529.99

This product was last offered at the strikethrough price on
10-06-2026

Starting at $ 1,449.40 USD

Add to Wish List

Rod bearings should be replaced as a preventative measure before 80,000 miles. This package is the most complete rod bearing overhaul kit available and includes not just the latest BMW rod bearings and connecting rod bolts, but also everything else that should be replaced with the oil pan and front subframe off the car.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

BMW N52 Valve Cover & PCV Valve Refresh Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:21735875

Part#: VALVECVRN52KT

In Stock

Sale - Save 11% $ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD

Add to Wish List

Qty

Sale - Save 11%

$ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD

Add to Wish List

Maintaining the peak performance and reliability of your BMW N52 engine is essential for a smooth and enjoyable driving experience. One of the most effective ways to achieve this is by replacing critical components like the valve cover, crankcase vent hose, angle connector with heating element, and cylinder sleeve. In this article, we'll delve into the numerous benefits of upgrading these vital parts, ensuring your BMW N52 operates at its best. Optimized Engine Performance: Replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve enhances your BMW N52's engine performance. The valve cover plays a crucial role in sealing the engine, preventing oil leaks and ensuring optimal valve operation. When you upgrade these components, you reduce the risk of performance-robbing oil leaks and maintain precise valve timing, resulting in improved horsepower and torque. Enhanced Reliability: Reliability is paramount for any BMW owner. These components, when aged or damaged, can lead to severe engine issues. By replacing them, you significantly reduce the likelihood of unexpected breakdowns or costly repairs, ensuring your BMW N52 engine runs smoothly and reliably for years to come. Improved Fuel Efficiency: An efficiently operating engine not only performs better but also consumes less fuel. The replacement of these components leads to better combustion, reduced emissions, and ultimately improved fuel efficiency. This means fewer trips to the gas station and a lighter environmental footprint. Reduced Maintenance Costs: Regular maintenance and repairs can add up over time. By proactively replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve, you mitigate the risk of more extensive engine damage that could lead to expensive repairs down the road. In the long term, this can translate into significant cost savings. Extended Engine Lifespan: The longevity of your BMW N52 engine is directly tied to the quality and condition of its components. When you invest in high-quality replacements, you're effectively extending the lifespan of your engine. This not only preserves the value of your BMW but also allows you to enjoy its performance for years to come. Precise Temperature Control: The angle connector with heating element is vital for maintaining optimal engine temperature, especially in cold weather. A malfunctioning or worn-out connector can disrupt temperature control, affecting engine performance. Replacing this component ensures consistent and precise temperature management. Customized Upgrades: When replacing these components, you have the opportunity to choose high-performance or specialized alternatives, allowing you to customize your BMW N52 to your preferences. Whether you prioritize power, efficiency, or specific driving conditions, there are options available to tailor your engine's performance accordingly. Included in the BMW N52 Valve Cover & PCV Valve Refresh Kit: 6 Cylinder Sleeves 1 Alternator Mounting Screw Set 1 Angle Connector with Heating Element 1 Valve Cover - Gasket Included 1 Crankcase Vent Hose

Show More Show Less

Performance Rod Bearing Replacement Kit - N55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:36032373

Part#: N55-WPC-RBKT2

In Stock

Sale - Save 5% $ 844.90

This product was last offered at the strikethrough price on
05-03-2026

$ 806.07 USD

Add to Wish List

Qty

Sale - Save 5%

$ 844.90

This product was last offered at the strikethrough price on
05-03-2026

$ 806.07 USD

Add to Wish List

This kit includes every thing needed to replace your rod bearings.

Kit includes

Upper and lower WPC-treated rod bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less

Performance+ S65 BE Bearings Rod Bearing & ARP Rod Bolt Lvl3 Kit- E9X...

10X Entries Into Our F80 M3 Sweepstakes

T#:21702997

Part#: BEPE9XRODKT

In Stock

$ 1,341.99

This product was last offered at the strikethrough price on
10-07-2026

$ 1,272.99 USD

Add to Wish List

Qty

$ 1,272.99 USD

Add to Wish List

BE Bearings, in collaboration with Clevite, a renowned OE bearing manufacturer, has engineered a cutting-edge solution. Our redesigned bearings offer enhanced clearance and feature a transition from the original tin-aluminum composition to lead copper. This upgrade incorporates the state-of-the-art Clevite Tri-Metal design, complete with a Tri-Armor™ coating. The result? Improved lubrication for wear prevention, along with softer, more engine-friendly bearings that tolerate foreign particles suspended in your oil. Additionally, this enhancement enables precise wear assessment through oil testing. Our comprehensive kit includes: Upper and lower BE Bearings upgraded rod bearings Necessary hardware Oil filter Liquid Moly 10W 60, ensuring optimal engine lubrication Oil pan gasket RedLine assembly lube for smooth installation Protect your S65 engine from potential disasters with BE Bearings' Rod Bearing Upgrade Kit. Ensure your engine's longevity and performance with this expertly designed-solution.

Show More Show Less

Rod Bearing Replacement Kit - E9X E82/88 N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:24145933

Part#: E9XN54RBRLMKT

In Stock

Sale - Save 1% $ 467.99

This product was last offered at the strikethrough price on
08-31-2026

$ 464.41 USD

Add to Wish List

Qty

Sale - Save 1%

$ 467.99

This product was last offered at the strikethrough price on
08-31-2026

$ 464.41 USD

Add to Wish List

This kit includes everything needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter Molygen New Generation Engine Oil (5w-40) - 7 Liters Oil pan gasket RedLine assembly lube

Show More Show Less

Dry N55 Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:40782380

Part#: N55RODBRGDRYKT

In Stock

Sale - Save 2% $ 399.64

This product was last offered at the strikethrough price on
05-03-2026

$ 393.07 USD

Add to Wish List

Qty

Sale - Save 2%

$ 399.64

This product was last offered at the strikethrough price on
05-03-2026

$ 393.07 USD

Add to Wish List

This kit includes everything needed to replace the rod bearings in your N55 engine other than the engine oil and assembly lube. Kit includes Upper and lower rod bearings Hardware Oil filter Oil pan gasket

Show More Show Less

N55 Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:23913954

Part#: N55RODBRGKT

In Stock

$ 527.50 USD

Add to Wish List

Qty

$ 527.50 USD

Add to Wish List

This kit includes everything needed to replace the rod bearings in your N55 engine. Kit includes Upper and lower rod bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less

Performance S65 BE Bearings Rod Bearing & Rod Bolt Lvl3 Kit- E9X M3 (...

10X Entries Into Our F80 M3 Sweepstakes

T#:15644283

Part#: 11427837997KT

Ships on Nov 2, 2026

$ 1,165.99 USD

Add to Wish List

Qty

$ 1,165.99 USD

Add to Wish List

BE Bearings, in conjunction with Clevite, an OE bearing manufacturer, have redesigned and manufactured the bearings for greater clearance and have changed the original material composition from tin-aluminum to lead-copper. This upgrade incorporated the state-of-the-art Clevite Tri-Metal design and featured a Tri-Armor™ coating. This allows for the additional lubrication for wear prevention, plus, the softer bearings are better for your engine and are more tolerant of foreign particles suspended in your oil. Another benefit from this is that the oil can now be sent for testing to accurately gauge the amount of wear occurring in the engine. Kit includes Upper and lower BE Bearings upgraded rod bearings Hardware Oil filter Castrol TWS Edge Professional 10W 60 Oil pan gasket RedLine assembly lube

Show More Show Less

N54 Spline Lock Crank Hub Solution With Complete Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733525

Part#: VTT-CRANKHUB-3

Ships in 3 Business Days

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Cam Bearing Ledge Replacement Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:23748158

Part#: 11127531224TKT

In Stock

$ 1,663.66 USD

Add to Wish List

Qty

$ 1,663.66 USD

Add to Wish List

Have your camshaft bearing ledges seen better days? This kit includes everything needed to replace your cam bearing ledges with Genuine BMW and high-quality OEM components. Included in this kit: Intake Cam Bearing Ledge Exhaust Cam Bearing Ledge Valve Cover Gasket Timing Chain Tensioner Cylinder Head Hardware Assembly Lubricant BMW Engine Oil Hengst Oil Filter

Show More Show Less

Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:41695012

Part#: 6B1584H-STDLMTKT

In Stock

Sale - Save 1% $ 466.99

This product was last offered at the strikethrough price on
08-31-2026

$ 463.49 USD

Add to Wish List

Qty

Sale - Save 1%

$ 466.99

This product was last offered at the strikethrough price on
08-31-2026

$ 463.49 USD

Add to Wish List

Rod bearings are a known issue for your N54, replace them to prolong life of your Engine!

Cam Bearing Ledge Replacement Kit - N54

10X Entries Into Our F80 M3 Sweepstakes

T#:640352

Part#: 11127531224KT2

In Stock

$ 1,663.66 USD

Add to Wish List

Qty

$ 1,663.66 USD

Add to Wish List

Over time the bearing ledges in your N54 can be damaged by contaminated oil or a malfunctioning VANOS which can cause grooves to form in the bearing ledges. This kit contains everything necessary to replace these as well as important hardware.

Show More Show Less

N55 Turbo Install Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:401612

Part#: 18407502196KT2

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

BMW E6X / E8X / E9X / Z4 Cam Bearing Ledge Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:21703017

Part#: N54CAMBRINGKT

In Stock

$ 1,663.66 USD

Add to Wish List

Qty

$ 1,663.66 USD

Add to Wish List

Maintaining your BMW E6X, E8X, E9X, or Z4 engine health is paramount to ensure optimal performance and longevity. Two crucial components that require periodic attention are the cam bearing ledge and valve cover gasket. Regular servicing of these components, along with other critical elements such as the camshaft O-ring, chain tensioner (with gasket), and oil filter, is imperative to keep your BMW running smoothly. Included in Kit: 1 - Cam Bearing Ledge - Exhaust 29 - Torx Bolt 1 - Genuine Cam Bearing Ledge - Intake 1 - Genuine Cam Bearing Ledge - Exhaust 1 - Valve Cover Gasket 4 - Genuine Camshaft O-rings 7 - Genuine BMW TwinPower Turbo 5W-30 Engine Oil 1 - Assembly Lube 1 - Chain Tensioner - With Gasket Ring 1 - Hengst Oil Filter 2 - Collar Screws Cam Bearing Ledge: The cam bearing ledge is vital for proper camshaft support and lubrication. Over time, wear and tear can compromise its effectiveness, potentially leading to camshaft damage. Servicing this component ensures that your camshaft operates optimally, preventing costly repairs. Valve Cover Gasket: A well-maintained valve cover gasket is essential to prevent oil leaks and maintain proper sealing in the engine. Ignoring gasket issues can lead to oil contamination, loss of engine performance, and even engine damage. Camshaft O-Ring: The camshaft O-ring helps maintain proper oil pressure and prevents oil leakage. A deteriorated O-ring can result in oil seepage, leading to lubrication issues that affect engine performance and longevity. Chain Tensioner (with Gasket Ring): Proper timing chain tension is crucial for engine synchronization. Servicing the chain tensioner and its gasket ensures correct timing, preventing potential engine misfires and damage. Oil Filter: Regularly replacing the oil filter is fundamental to maintaining clean engine oil. Clean oil is essential for lubrication and heat dissipation, safeguarding the engine against wear and tear. Kit is for these BMW models: E60 / E61 - N54 3.0L E82 / E88 - N54 3.0L E90 / E92 / E93 - N54 3.0L Z4 - N54 3.0L

Show More Show Less

ACL Rod Bearing Set - With Genuine BMW Bolts

10X Entries Into Our F80 M3 Sweepstakes

T#:15710769

Part#: 8B1580HSTDKT-KT

In Stock

$ 540.99 USD

Add to Wish List

Qty

$ 540.99 USD

Add to Wish List

Includes upper and lower bearing shells for a complete rod bearing replacement.

OEM S65 WPC Bearing with Genuine BMW Rod Bolt Lvl2 Kit- E9X M3 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:7260312

Part#: S65WPCDKT

In Stock

$ 1,445.99 USD

Add to Wish List

Qty

$ 1,445.99 USD

Add to Wish List

Includes WPC Treated Genuine BMW Bearings, Genuine BMW Connecting Rod Bolts, Genuine BMW Hardware and Redline Assembly Lube - 4 oz

Vargas "Spline Lock" Crank Hub Solution - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:558924

Part#: VTT-N54-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Spline Lock Crank Hub Solution

2X Entries Into Our F80 M3 Sweepstakes

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733526

Part#: VTT-CRANKHUB-4

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733527

Part#: VTT-CRANKHUB-2

Ships in 10 Business Days

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...

2X Entries Into Our F80 M3 Sweepstakes

T#:19395579

Part#: VTTCRANKHUBPKG

Ships in 10 Business Days

$ 934.99 USD

Add to Wish List

Qty

$ 934.99 USD

Add to Wish List

VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture

Show More Show Less

Rod Bearing Replacement Kit - E9X E82/88 N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:24145934

Part#: E9XN54RBRKT

In Stock

Sale - Save 7% $ 578.99

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

Qty

Sale - Save 7%

$ 578.99

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

This kit includes everything needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less

Eccentric Shaft Replacement Kit - N55/S55

10X Entries Into Our F80 M3 Sweepstakes

T#:21735862

Part#: CAMGSKTN55S55KT

In Stock

$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines

Show More Show Less

Eccentric Shaft Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:22789670

Part#: S55SHAFTRPCKT

In Stock

$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

Ensure the peak performance of your BMW N55 or S55 engine with Turner Motorsport's Eccentric Shaft Replacement Kit. This all-inclusive kit features essential components, including:

Camshaft
Eccentric Shaft Bearing
Valve Cover Gasket Set
Gasket

Designed for precision and durability, this kit guarantees optimal engine performance and longevity. Rely on Turner Motorsport for top-quality replacement parts that adhere to the highest standards.

Show More Show Less

Rod Bearing Replacement Kit - E9x, E82, E88

10X Entries Into Our F80 M3 Sweepstakes

T#:42133543

Part#: 11247589671TKT

Back Ordered

Sale - Save 1% $ 563.99

This product was last offered at the strikethrough price on
05-15-2026

$ 557.81 USD

Add to Wish List

Qty

Sale - Save 1%

$ 563.99

This product was last offered at the strikethrough price on
05-15-2026

$ 557.81 USD

Add to Wish List

Whether addressing rod bearing noise or performing preventative maintenance, this kit ensures optimal engine health, reducing the risk of costly repairs.

OEM+ S65 WPC Bearing with ARP Rod Bolt Lv3 Kit- E9X M3 (LM)

10X Entries Into Our F80 M3 Sweepstakes

T#:22196336

Part#: BEARINGBOLTARPKT

In Stock

$ 1,860.99

This product was last offered at the strikethrough price on
10-07-2026

$ 1,791.99 USD

Add to Wish List

Qty

$ 1,791.99 USD

Add to Wish List

Includes WPC Treated Genuine BMW Bearings, ARP Connecting Rod Bolts, 9 Qts Liqui Moly GT1 10w-60 Oil, Genuine BMW Hardware and Redline Assembly Lube - 4 oz

N54 Crank Hub Service Kit - Up To 02/2011

For vehicles with production date up to 02/2011

10X Entries Into Our F80 M3 Sweepstakes

T#:2227021

Part#: N54PRCRANKT

In Stock

Sale - Save 3% $ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD

Add to Wish List

Qty

Sale - Save 3%

$ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD

Add to Wish List

All of the components necessary for service when upgrading to an aftermarket crank hub solution.

Aluminum Cylinder Head Bolt Set

2X Entries Into Our F80 M3 Sweepstakes

T#:594302

Part#: 11120392547

In Stock

$ 12.99

This product was last offered at the strikethrough price on
08-13-2026

$ 7.89 USD

Add to Wish List

Qty

$ 7.89 USD

Add to Wish List

If you remove your cylinder head replacement head bolts are a must. These bolts are designed to be torqued down and not reused.

OEM S65 WPC Bearing with Genuine BMW Rod Bolt Lvl3 Kit- E9X M3 (CS) ...

10X Entries Into Our F80 M3 Sweepstakes

T#:15677519

Part#: 112478345220KT

In Stock

$ 1,625.99 USD

Add to Wish List

Qty

$ 1,625.99 USD

Add to Wish List

Includes WPC Treated Genuine BMW Bearings, Genuine BMW Connecting Rod Bolts, 9 Qts OEM Castrol 10w-60 Oil, Genuine BMW Hardware and Redline Assembly Lube - 4 oz

Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710825

Part#: CR222SV-KT

In Stock

Sale - Save 7% $ 578.95

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

Qty

Sale - Save 7%

$ 578.95

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

This kit includes every thing needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less

Performance Rod Bearing Replacement Kit - N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:36032371

Part#: N54-WPC-RBKT2

In Stock

Sale - Save 7% $ 810.99

This product was last offered at the strikethrough price on
05-03-2026

$ 757.66 USD

Add to Wish List

Qty

Sale - Save 7%

$ 810.99

This product was last offered at the strikethrough price on
05-03-2026

$ 757.66 USD

Add to Wish List

This kit includes everything needed to replace your rod bearings.

Kit includes

Upper and lower WPC-treated connecting rod bearings Hardware Oil filter Molygen New Generation Engine Oil (5w-40) - 7 Liters Oil pan gasket RedLine assembly lube

Show More Show Less

Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710826

Part#: CR222SV0KT

In Stock

Sale - Save 7% $ 578.95

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

Qty

Sale - Save 7%

$ 578.95

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

This kit includes every thing needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less

N54 Crank Hub Service Kit - From 02/2011

For vehicles with production date from 02/2011

10X Entries Into Our F80 M3 Sweepstakes

T#:2227020

Part#: N54POCRANKT

In Stock

Sale - Save 3% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD

Add to Wish List

Qty

Sale - Save 3%

$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD

Add to Wish List

All of the components necessary for service when upgrading to an aftermarket crank hub solution.

King X-Series Bearings S65 Performance Rod Bearing Replacement Kit ...

10X Entries Into Our F80 M3 Sweepstakes

T#:56218624

Part#: CR8066GPCXKT2

Ships on Nov 2, 2026

$ 1,219.99

This product was last offered at the strikethrough price on
10-08-2026

$ 1,217.99 USD

Add to Wish List

Qty

$ 1,217.99 USD

Add to Wish List

We built this S65 Rod Bearing Refresh Kit to deliver proven reliability under severe operating conditions. Anchored by King’s X-series Coated GPC Rod Bearings, this kit utilizes specialized polymer coatings to resist scuffing, handle elevated oil temperatures

Show More Show Less

S65 High Performance Rod Bearing And Bolt Set - E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:55857735

Part#: S65BABKT2

Ships on Nov 2, 2026

$ 547.99 USD

Add to Wish List

Qty

$ 547.99 USD

Add to Wish List

We’ve packaged the ultimate preventative maintenance solution to keep your high-revving 4.0L V8 screaming all the way to its 8,400 RPM redline with peace of mind. This kit combines the industry's most trusted bearings with high-strength fasteners to eliminate the S65’s biggest Achilles' heel.

Show More Show Less

King Bearings S65 Performance Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:56218621

Part#: CR8066GPCKT2

Ships on Nov 2, 2026

$ 1,219.99

This product was last offered at the strikethrough price on
10-08-2026

$ 1,217.99 USD

Add to Wish List

Qty

$ 1,217.99 USD

Add to Wish List

We built this S65 Rod Bearing Refresh Kit to deliver proven reliability under severe operating conditions. Anchored by King’s Coated GPC Rod Bearings, this kit utilizes specialized polymer coatings to resist scuffing, handle elevated oil temperatures

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 3 Series E93 (2007-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results