BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 3 Series E93 (2007-2013)

The Mach Force XP cat-back exhaust system produces 11hp and 10lbs. x ft. of torque for your BMW 335i. This exhaust systems is constructed from 2.75" mandrel bent, 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. The system also comes with dual 3.5" polished 304 stainless steel tips and muffler to build a mellow, yet powerful sound. Note: Cutting is required and should be performed by a skilled technician.

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing mufflers is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Crossover Balance Tube:
The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance, it also reduces sound decibels ultimately minimizing exhaust drone.

This part fits the following BMWs:
2007-2010 E9X 335i

This system is constructed of 2.50" diameter, mandrel bent, TIG-welded, 304 stainless steel, brushed finish tubing and uses all factory mounting locations for an approximate 1 hour install time. In recent testing, this exhaust system produced 12 horsepower and 11 lbs. x ft. of torque. This unique system utilizes 3.5" diameter 304 polished laser etched quad tips that fit perfectly in your stock bumper cutouts.

304 Stainless Steel:
This unique exhaust system uses 2.5" diameter 304 stainless steel that is TIG-welded and has a hand brushed finish.

304 Stainless Steel Polished Quad Tips:
3.5" diameter polished tips are used for and aggressive yet sporty look.

Dual Mufflers:
The dual mufflers consist of a single in, dual out, free flowing design, giving an agressive sound at high RPM's, yet maintaining a suttle tone at cruising speeds.

Uses OE Mounting Locations:
This system uses factory mounting locations providing stability and hassle-free installation with no modifications neccessary.

Legality:
This part does not require a CARB EO#

Ensure a secure connection between the downpipe and the turbo in your BMW with the Genuine V-Band Exhaust Clamp 11658585233. This high-quality clamp provides a reliable mount, ensuring optimal performance and exhaust system integrity.

• Genuine V-Band Exhaust Clamp for BMW
• Securely mounts downpipe to the turbo
• Ensures a reliable and durable connection
• Maintains optimal exhaust system performance

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance.

This is a Bosch O2 sensor - also known as a Lambda probe. Bosch is an OEM supplier to BMW.

Position: after the catalytic converter (post-cat).

This item fits the following BMWs:
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

Engineered for vehicles with vacuum-actuated exhaust valves, the ECS Remote Vacuum Exhaust Valve Control Kit puts you in complete command of your exhaust sound. This fully standalone system lets you open or close your valves instantly—no reliance on factory controls, drive modes, or complicated wiring.

At its heart is a self-contained vacuum pump and dedicated control module, operating entirely independent of your vehicle’s electronics. The result is broad compatibility with both OEM and aftermarket exhaust systems, allowing for the freedom to switch between aggressive performance sounds and a refined, quiet tone at the touch of a button.

Kit Includes:

Standalone Vacuum Pump – Delivers consistent vacuum for reliable valve function

Wiring Harness Options – Choose from a reversible cigarette lighter power adapter or a length of wire for custom hardwiring

High-Quality Vacuum Hose – Durable, leak-resistant construction for long-lasting performance

Remote Controllers – Compact fobs for easy operation from inside or outside the vehicle

Features:

Instant open/close control for exhaust valves

Operates completely independent of factory electronics

Universal compatibility with vacuum-actuated valve systems

Ideal for both aftermarket and factory exhaust setups

From stealthy early-morning starts to unleashing your exhaust’s full roar on demand, the ECS Remote Vacuum Exhaust Valve Control Kit gives you total control over your car’s voice—whenever and wherever you want it.

Tired of busting your knuckles from old hardened exhaust hangers?

This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.

Upgrade your exhaust system with the 2.5" Stainless Steel 3-Bolt Flange - Priced Each. This high-quality flange is designed to provide a durable and reliable connection for your exhaust components. Made from stainless steel, it offers corrosion resistance and longevity, ensuring a lasting performance. Whether you're repairing or customizing your exhaust system, this flange is an essential component for a secure fit.

• Durable stainless steel construction
• Corrosion-resistant for long-lasting performance
• Provides a reliable connection for exhaust components
• Suitable for repair or customization of exhaust systems

Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high quality Bosch sensor to turn off your check engine light and restore fuel mileage.

This is the OEM Bosch oxygen sensor for BMW's with the N52 engine. This sensor is mounted in the rear downpipe before the catalytic converter. Bosch part number 17099. OEM replacement for BMW # 11787558073 and 11787537984.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ E89 BMW Z4 sDrive30i

Why own the only V8-powered M3 if you can’t actually hear it? BMW's E9X M3 features a hefty rear muffler assembly that silences the S65's distinctive soundtrack. While full cat-back systems can require a serious financial commitment, our new Muffler Delete Kit offers an affordable, no-compromise solution that brings your M3 to life!

This system transforms the character of your S65 by replacing the restrictive factory mufflers with a free-flowing, TIG-welded stainless steel assembly designed to amplify tone, shed weight, and preserve OEM fit and finish. Our design features dual 2.5" primary tubing that flows into adjustable 3" quad tips, creating a clean yet aggressive aesthetic. Up front, factory-style V-band flanges connect directly to the OEM midpipe—meaning no cutting of factory exhaust piping. At the rear, Accuseal slip-fit connections allow perfect tip alignment within the factory diffuser, ensuring a tailored, symmetrical look every time.

FEATURES

TIG-welded dual 2.5" primary tubing transitioning into adjustable 3" quad tips for a bold, refined appearance

OE-style V-band flanges for true factory-like integration—no cutting required

Accuseal slip-fit joints for full adjustability and precise tip placement

Utilizes factory hangers for a clean, bolt-on installation with zero drilling or modification

PRODUCT DEVELOPMENT

Our Rear Muffler Delete Kit is the result of advanced engineering, testing, and quality assurance by Turner’s Research & Development team. Every stage of development employs FARO laser scanning, SolidWorks 3D CAD modeling, and in-house rapid prototyping for precise fitment and design validation. Performance and durability are proven through Mustang AWD 500 SE dyno testing and Superflow SF-750 Flowbench analysis, ensuring each component meets Turner’s uncompromising standards for performance and quality.

INSTALLATION & SUPPORT

Need installation guidance? Our R&D team has you covered. A complete, start-to-finish install guide is available HERE.